• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.7
• /
• pp.807-815
• /
• 1998

Functions of interlinings to the shell fabric are to improve the garment formability for a beautiful silhouette and elastic potential to the deformed fabric during wearing, and also are to enhance appearance and wearing properties of garment. The objective of this study is to analyse the thermal properties of nonwoven fusible interlining to the thin worsted fabric with various fabric structural parameters. For the purpose fo this study, eight specimens with various weft yarn twists and weft densities of thin worsted fabrics are prepared. Three nonwoven fusible interlinings with different structure which were made by Nylon/Polyester were used for adhering to the thin worsted fabrics. Thermal properties of these 24 adhesive fabrics fused with 3 nonwoven interlinings are measured by KES-F7 System for analysing the thermal suitability of nonwoven fusible interlinings to the thin worsted fabrics with various fabric structural parameters. And air permeability, which was measured by KES-F8-API, of 24 nonwoven adhesive interlining fabrics was also analysed and discussed with the various kinds of nonwoven interlinings and fabric structural parameters.

• Carbon letters
• /
• v.13 no.4
• /
• pp.191-204
• /
• 2012

Carbon nanotubes (CNTs) have exceptional mechanical, electrical, and thermal properties compared with those of commercialized high-performance fibers. For use in the form of fabrics that can maintain such properties, individual CNTs should be held together in fibers or made into yarns twisted out of the fibers. Typical methods that are used for such purposes include (a) surfactant-based coagulation spinning, which injects a polymeric binder between CNTs to form fibers; (b) liquid-crystalline spinning, which uses the nature of CNTs to form liquid crystals under certain conditions; (c) direct spinning, which can produce CNT fibers or yarns at the same time as synthesis by introducing a carbon source into a vertical furnace; and (d) forest spinning, which draws and twists CNTs grown vertically on a substrate. However, it is difficult for those CNT fibers to express the excellent properties of individual CNTs as they are. As solutions to this problem, post-treatment processes are under development for improving the production process of CNT fibers or enhancing their properties. This paper discusses the recent methods of fabricating CNT fibers and examines some post-treatment processes for property enhancement and their applications.

• Journal of the Korean Home Economics Association
• /
• v.25 no.4
• /
• pp.9-18
• /
• 1987

This study is conducted to investigate the influence of addition of quarternary ammonium salt(cetyl trimethyl ammonium bromide: CTAB) when polyester(PET) fabric is treated with sodium hydroxide(NaOH), depending on experimental variables such as CTAB concentration, NaOH concentration, time & temperature, and the change in physical & chemical properties of alkaline-hydrolyzed PET fabrics depending on their weight loss. The results are as follows: 1. By adding CTAB in aqueous NaOH, the weight loss of PET fabric is increased remarkably and until the concentration of CTAB is reached at its cmc, and the higher the concentration of CTAB are, the more weight loss on PET fibrics are. 2. The addition of CTAB in aqueous NaOH is most effective at lower NaON concentration(2%) among various NaOH concentration, on increasing the amount of weight loss, while there are almost similar results through various treatment time and temperature. 3. As the amount of weight of weight loss on PET fabric is increased, the increase of void space in the PET yarn, of softness & dyeability of PET fabric and the decrease of tensile strength are found. On the other hand, the moisture regain shows a little increase by alkaline-hydrolysis on PET fabric while vertical absorption test & water retention value are not sufficiently sensitive to distinguish between the hydrophillicity of untreated and treated PET fabric. The shrinkage of PET fabric is induced by swelling in hot aqueous NaOH regardless of NaOH concentration & addition of CTAB.

• Fashion & Textile Research Journal
• /
• v.11 no.3
• /
• pp.474-480
• /
• 2009

The purpose of this study is to prepare the hardness of polyester(PET) fabric by thermal bonding with low melting component of bicomponent fiber and to describe the change of physical properties of thermal bonded PET fabrics. The PET fabrics were prepared with regular PET fiber as warp and bicomponent fiber as weft. The bicomponent fiber of sheath-core type were composed with a regular PET core and low melting PET sheath. The thermal bonding of PET fabric was carried out in pin tenter from 120 to $195^{\circ}C$ temperature range for 60 seconds. In this study, we investigated the physical properties and melting behavior of PET fiber and the effect of the temperature of the pin tenter on the thermal bonding, mechanical properties. Melting peak of warp showed the thermal behavior of general PET fiber. However, melting peak of weft fiber(bicomponent fiber) showed the double melting peak. The thermal bonding of the PET fabric formed at about temperature of lower melting peak. The optimum thermal bonding conditions for PET fabrics was applied at $190{\sim}195^{\circ}C$ for 60seconds by pin tenter. On the other hand, the tensile strength of the PET fabric decreased with an increasing temperature of thermal bonding.

• Fashion & Textile Research Journal
• /
• v.11 no.3
• /
• pp.496-501
• /
• 2009

In this study, a kiwifruit-produced protease was used to improve the quality of the wool and silk fabrics. The wool and silk were treated with the actinidin from kiwifruit. Following this protease treatment, changes in the surface of a single yarn of the fabrics were observed via both an optical microscope and a scanning electron microscope (SEM). In order to determine the amount of dye uptake in the fabric, changes in the K/S value of the wool and silk were measured by spectrophotometric analysis. Also, we performed a tensile strength examination to determine variation in their mechanical properties. By increasing the protease treatment time to 48h, the dyeing properties of fabrics were enhanced, and the surfaces of the single yarns of the fabrics became smoother, because of the removal of soil and scale in them. However, no mechanical changes were detected in the fabrics. Thereby, we suggest that the kiwifruit-produced actinidin treatment can improve the quality of the fabrics.

• Fashion & Textile Research Journal
• /
• v.18 no.6
• /
• pp.733-745
• /
• 2016

This paper provides a review of wearable textile strain sensors that can measure the deformation of the body surface according to the movements of the wearer. In previous studies, the requirements of textile strain sensors, materials and fabrication methods, as well as the principle of the strain sensing according to sensor structures were understood; furthermore, the factors that affect the sensing performance were critically reviewed and application studies were examined. Textile strain sensors should be able to show piezoresistive effects with consistent resistance-extension in response to the extensional deformations that are repeated when they are worn. Textile strain sensors with piezoresistivity are typically made using conductive yarn knit structures or carbon-based fillers or conducting polymer filler composite materials. For the accuracy and reliability of textile strain sensors, fabrication technologies that would minimize deformation hysteresis should be developed and processes to complement and analyze sensing results based on accurate understanding of the sensors' resistance-strain behavior are necessary. Since light-weighted, flexible, and highly elastic textile strain sensors can be worn by users without any inconvenience so that to enable the users to continuously collect data related to body movements, textile strain sensors are expected to become the core of human interface technologies with a wide range of applications in diverse areas.

• Fashion & Textile Research Journal
• /
• v.18 no.6
• /
• pp.878-888
• /
• 2016

In this study, wool/nylon(50/50%) blend yarn and its fabrics for tra-biz(complex word of travel+business) garment were prepared, and its wear comfort characteristics were investigated through thermal manikin and human-body wearing experiment. In addition, tactile wearing performance from fabric mechanical properties and the dimensional stability and the pilling of the fabric specimen during wearing and dry-cleaning were measured and compared with those of wool 100% fabric specimen. Heat keepability of the wool/nylon(50/50%) blend fabric by thermal manikin experiment was superior than that of wool 100% fabric, this result was verified with human-body wearing experiment and its result coincided well with this experimental result. Tactile wearing performance of the wool/nylon(50/50%) fabric from fabric mechanical properties measured by FAST system was better than that of the wool 100% fabric. The dimensional stability of the wool/nylon(50/50%) fabric was more stable than that of the wool 100% fabric. Because relaxation shrinkage was lower and hygral expansion of wool 100% fabric was more high. However, the breathability and pilling property of the wool/nylon(50/50%) fabric were inferior than those of the wool 100% fabric. The possibility of application for tra-biz garment of wool/nylon(50/50%) blend fabric was observed because of good heat keepability, tactile wearing performance and washing fastness.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.222-227
• /
• 2008

This study is focused on an integrated numerical modeling enabling one to investigate the dynamic behavior and failure of 2-D textile composite and 3-D orthogonal woven composite structures weakened by micro-cracks and subjected to an impact load. The integrated numerical modeling is based on: I) determination of governing equations via a three-level hierarchy: micro-mechanical unit cell analysis, layer-wise analysis accounting for transverse strains and stresses, and structural analysis based on anisotropic plate layers, II) development of an efficient computational approach enabling one to perform transient response analyses of 2-D plain woven and 3-D orthogonal woven composite structures featuring the matrix cracking and exposed to time-dependent loads, III) determination of the structural characteristics of the textile-layered composites and their degraded features under various geometrical yarn shapes, and finally, IV) assessment of the implications of stiffness degradation on dynamic response to impact loads.

• International Commerce and Information Review
• /
• v.9 no.2
• /
• pp.161-182
• /
• 2007

The objective of this paper is to examine the competitiveness of Korean export firms in EU market. In this study, market share index, RCA index, trade specialization index, and market competitiveness index were used as an analytical tool. On the market share index, Korea had a large market share in the SITC section 7(machinery and transport equipment) market in EU. On the RCA index, Korea appeared to have high export competitiveness in the electrical machinery, apparatus and appliances, n.e.s.(not elsewhere specified[stated]), and electrical parts thereof (77), travel goods, handbags and similar containers(83), textile yarn, fabrics, made-up articles, n.e.s., and related products(65), and iron and steel(67) division. On the trade specialization index, however, Korea appeared to tend to decline generally. On the market competitiveness index, Korea appeared to have competitive advantage in the iron and steel(67), machinery specialized for particular industries(72), office machines and automatic data-processing machines(75), electrical machinery, apparatus and appliances, n.e.s., and electrical parts thereof(77), road vehicles(78), and other transport equipment(79) division; but in 29 divisions, the index indicates that Korean firms' competitiveness was low. Finally, the authors discuss the implications of these findings and offer directions for future study.

• Journal of the Korean Society of Costume
• /
• v.51 no.6
• /
• pp.53-65
• /
• 2001

The major purpose of this study is to obtain the evident and visual structure of costume of priest with symbol through the Old Testament. Based on corroborative the Old Testament, this thesis analyzes the costume of priest. This compares Aaron with his sons. This compares the two onyx stones on the shoulder pieces with four rows of precious stones on the breastpiece. This compares the robe with the woven tunic. This era falls on about from the 15th century before Christ. The crafts men whom God have endowed with skill make the vestments. Due to the christian religion, the body was entirely concealed. The costume of priest were not only used as dignity but also grandeur. According to the Old Testament the colour of the costume has signified not only the colour sense but also important symbolic meanings. The priest wore, over undergarments, a woven tunic, and he wore over the tunic, a robe, an ephod, a breastpiece, a sash, using a turban as head covering. Gold, and blue, purple and scarlet yarn, and fine linen are used. Aaron and his sons must wear them whenever they enter the Tent of Meeting or approach the altar to minister in the Holy Place, so that they will not incur guilt and die.