• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.2
• /
• pp.379-382
• /
• 2017

This paper proposes a $4{\times}4$ broadband phased array antenna using a Left-Handed Transmission Line (LHTL) based phase shifter. The phased array is constructed with sixteen quasi-Yagi antenna elements and the phase shifters, as well as four power dividers. A key component of the system, the LHTL based phase shifter is able to control a phase delay of incident waves linearly and continuously. The fabricated phased array antenna operate for a frequency range of 800 MHz (1.6 GHz~2.4 GHz). The beam scanning range of the $4{\times}4$ array antenna is ${\pm}27^{\circ}$ horizontally and vertically while the antenna gain is maintained with a variation of ${\pm}1.4dBi$.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.293-296
• /
• 2002

In this paper, we proposed a beam tilting microstrip patch array antenna for the reception of satellite signals by using low cost copper etched polyester films and foams. The configuration and coupling mechanism of the proposed antenna are similar to the dipole Yagi-Uda antenna. It is composed of 3 layers of polyester films and three layers of foam. In order to prevent unwanted radiation and coupling loss by microstrip feeding networks and parasitic patches, a stacked layer with rectangular slots above the driver patch array is inserted. The 16${\times}$8 element microstrip Patch way antenna is Presented by experimental results. Its beam patterns are affected by many parameters such as sizes of the patches, gap between the patches. characteristics of the substrates, feeding method, etc. Owing to its complexities of various design parameters, both simulation and experiment were performed. The fabricated antenna received DBS signal from KOREASAT 3 by doing nothing but adjusting azimuth direction.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.12
• /
• pp.1410-1415
• /
• 2008

This paper proposes an small electronically steerable parasitic array radiator composed of a uniplanar dipole as a feeding element and two dipoles as parasitic elements. The fabricated antenna shows by measurement the $3.3{\sim}4.3\;dB$ gain between $-100{\sim}1000$ azimuth range in the dipole vertical plane and -10 dB return loss within $5.4{\sim}5.9\;GHz$, which includes $5.725{\sim}5.825\;GHz$ UNII band.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.197-203
• /
• 2016

In this paper, the dipole antenna that can control a beam steering were designed for attaching on LEO(Low Earth Orbit) small satellite. The proposed antenna was based on Yagi-Uda antenna. The parasitic element was proposed as a T-shape. Depending on the state of open or short at the end of a vertical element, we can choose a characteristic of the parasitic element with fixing a vertical element length of the parasitic element. Using this characteristic, we designed the director element and reflector element. The proposed antenna was designed to receive UHF 436.5 MHz. Antenna gain was chosen by link budget between one satellite and the other satellite or between the satellite and the ground station. By changing a vertical element length which is the largest variable that chooses an antenna characteristic, we confirmed that ${\lambda}/2$ length transformer has a result that improve 0.5 dB in comparison ${\lambda}/4$ length transformer from maximum gain direction. In production, we made an on/off switch composed of a diode, capacitor, and inductor control an open and short at the end of the parasitic element. As a result, the gain of antenna used in a link between one satellite and the other satellite had average 5.92 dBi. And the gain of antenna used in a link between the satellite and the ground station had average 0.99 dBi.

• Korean Journal of Environment and Ecology
• /
• v.24 no.4
• /
• pp.487-492
• /
• 2010

This study was conducted to analyze the home range size of Pipistrellus abramus in non-reproductive season. The survey was conducted in the day-roosting site of Pipistrellus abramus located in Gyeongju City(North Gyeongsang Province). We radio-tracked six Pipistrellus abramus(male 3, female 3) and LTM single stage radio transmitter(0.38g), R2000 ATS receiver, three element yagi antenna, roof mounted antenna and ArcGIS 3.3(ESRI, Animal Movement Extension 2.0) were used to locate bats and home range analyze. The home range sizes of the 6 radio-tracked Pipistrellus abramus ranged from 8.97 to 19.07ha(Maen $14.46{\pm}3.44ha$). Mean home range size of female($16.83{\pm}1.96ha$) was larger than that of male($12.08{\pm}2.96ha$) but there were no significant differences in home range sizes between male and female(t=2.32, p>0.05). Also, mean maximum distances from the roost was $468.73{\pm}94.38m$ but there were no significant differences between sexes(female, $422.73{\pm}10.38m$; male, $514.74{\pm}125.74m$; t=-1.26, p>0.05).

• Journal of Advanced Navigation Technology
• /
• v.8 no.2
• /
• pp.98-104
• /
• 2004

When a straight-in landing from an instrument approach using ILS or VOR/DME is not possible or desirable because of topographical reason or bad weather, a circling approach maneuver is initiated by the pilot to align the aircraft with a runway for landing. Visual contact with the runway is necessary while conducting a circle to land maneuver. This research is to develop a new warning system based on a convention marker system which alerts pilots to watch out for exceeding the circling approach area. The airborne system also uses the same receiver unit without any new installations. The objective of this research is to design and develop a Yagi antenna in a special form. The research includes computer simulations to determine the size of antenna radiation pattern and to compute an expected flight path in case of alarm to validate effectiveness of the system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.1091-1094
• /
• 2005

This paper presents analysis and design for printed directive antenna using Bluetooth AP system. For the miniaturization of the antennas, dielectric substrate (${\varepsilon}_r$=4.6) and planar line Yagi-Uda antenna structure are used. The proposed Yagj-Uda antennas are simulated using commercial simulator (HFSS). The results of the simulation are presented and compared with characteristics of each array type. Especially, the proposed antennas can be applied to the design of various communication systems for 2.4 GHz band.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.195-196
• /
• 2016

In the maritime mobile radiocommunication service, AIS(Automatic Identification System) devices are most widely using for the exchange of ship's navigational information. The AIS time slot usage increases due to increasing number of ships installed with AIS, and thus the reception rate of AIS data decrease. In order to mitigate this problem, international organizations recommend a sectorised receiving technique using directional antenna. This paper analyzed the sectorised receiving effectiveness of AIS data using Yaga antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.6
• /
• pp.788-801
• /
• 1998

Meteor Burst Communication can provide effective and economical means of communication where long distance VHF NLOS data transmission is needed ; often ranges more than 1000 km. It has been, however, so far considered unsuitable for short distance application because of phenomenal decrease in burst durations, which leads to decreation of total duty rate of the system. This paper extensively analyzes characteristics of shot distance MB(Meteor Burst) path and shows the low duty rate may be improved by increasing burst rate through adapting antennal beam width to cover entire hot-spot region in the space and, by compensating effective burst length throughcutting down man-made noises introduced by antennal. Based on the analysis, we are developed a small-opening-cavity antennal, especially designed for short distance MB path. In operation, the antenna is to be buried under ground surface so as to improve directivity and reduces noise introduction. The antennal exhibits power gain of 3 dB with 90 degree beam width and thus enables to illuminate entire hot-spot regions with the elevation angle of 8-90 degree which is the case of transmission less than 100 km. Directivity horizontal to earth surface is suppressed to minimum which enables to cut man-made noises from near-by sources down to more than 3 dB from the level reported with conventional 4 element Yagi. A series of experiments performed on 100km MB paths have conformed that, with the antenna installed at receiving site, the burst rate and duration time have been noticed to increase by 10 and 20 percent respectively from the values obtained by conventional 4-element Yagi antennal under same testing condition.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.252-252
• /
• 2006