• Journal of Navigation and Port Research
• /
• v.33 no.9
• /
• pp.635-644
• /
• 2009

The optimum design of power yacht belongs to the nonlinear constrained optimization problems. The determination of scantlings for the bow structure is a very important issue with in the whole structural design process. The derived design results are obtained by the use of real-coded micro-genetic algorithm including evaluation from Lloyd's Register small craft guideline, so that the nominal limiting stress requirement can be satisfied. In this study, the minimum volume design of bow structure on the power yacht was carried out based on the finite element analysis. The target model for optimum design and local structural analysis is the bow structure of a power yacht. The volume of bow structure and the main dimensions of structural members are chosen as an objective function and design variable, respectively. During optimization procedure, finite element analysis was performed to determine the constraint parameters at each iteration step of the optimization loop. optimization results were compared with a pre-existing design and it was possible to reduce approximately 19 percents of the total steel volume of bow structure from the previous design for the power yacht.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.4
• /
• pp.455-461
• /
• 2008

This article describes a part of collaborative research between industry and academy to develop an initial hull form of 46 feet motor yacht. Hydrodynamic performances such as stability, resistance and seaworthiness were estimated after completing the procedure of hull form design in the initial design stage.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.1
• /
• pp.9-15
• /
• 2015

A Korean-designed cruiser class sailing yacht, based on the form of traditional yachts, has been developed. In this paper, structural design procedures for the yacht are studied. The scantling of structural members and loads is carried out based on the guidelines suggested by Australian Standard 4132-1993, the American Bureau of Shipping (ABS) and the International Organization for Standardization (ISO). Patran/Nastran finite element analysis is performed on models of the trial sailing boat, and from these results, the structural strength of the ship's hull is verified.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.30-34
• /
• 2003

The coast area of our country has various tourist attraction factors of its own such as plenty of islands, uncontaminated waters and so on. Nevertheless, sea tourism and leisure facilities have not been developed enough since the national tourist/leisure policies have mainly been focused on the land tourism so far. Recently, the lake and sea areas are becoming more an more popular to people for spending their leisure times, and they, especially the young generations, are eagerly searching for some good ocean spots to enjoy the dynamics maritime sports. In this paper, we worked on the first design phase of environmentally and visually adaptive yacht, taking the cost effectiveness and the safety factors into account as well.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.1 s.145
• /
• pp.75-86
• /
• 2006

The scantling and structural design work is done during the initial stage in yacht design. This paper studies a procedure of the structural design for yacht with an illustrative design. Scantling of structural members and loads are defined based on the rules suggested by ISO(International Standard Organization) and ABS(American Bureau of Shipping). Also, FEA(Finite Element Analysis) model is presented for a practical guide for structural analysis. An equivalent structural element is used to simplify the composite material for the analysis.

• Composites Research
• /
• v.28 no.1
• /
• pp.15-21
• /
• 2015

The purpose of this paper is to investigate the current trends of composite applications in the marine and leisure fields and to study the development of 33ft class America's cup training CFRP sailing yacht. In the field of marine and leisure, composite materials have been just used to marine and leisure structures, recently. Especially, since the America's cup of sailing yacht racing has required the light weight and high mechanical performance to make a high speed, CFRP have been recognized as the critical material to construct the racing yacht structures. To establish the process of CFRP racing yacht construction, the design optimizations and production methods of carbon mast and CFRP yacht hull were discussed in this paper. Finally, the constructed CFRP sailing yacht exhibited high performance as the racing yacht through the sailing test.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.2 s.152
• /
• pp.64-73
• /
• 2007

Turbulent flows around yacht sails were calculated to access the applicability of CFD for yacht design. Multi-block grid system was generated by using Gridgen package and Fluent was used to calculate flows around two sail system. A 30ft class sailing yacht designed and tested by KRISO was chosen. The interference effect between main and jib sails was analyzed. Pressure distribution on the sails was obtained and the center of effort was estimated. It was found that the jib angle affects the flow phenomena around a main sail due to the change of inflow angle. The location of center of effort is much different from the empirical formula based on a simple geometrical consideration. The calculated results are compared with the previous numerical and experimental results. Both CFD results are similar, but there are some discrepancies with experimental data. However, it is certain that CFD can be a very useful tool for yacht design.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.6
• /
• pp.91-95
• /
• 2003

Yacht design is significantly affected by the hull geometrical characteristics. Therefore, it is necessary to closely examine the relation between hull and performance, before considering characteristics of sea condition. In this study, Genetic Programming is used to derive a formula the relationship between hull geometric characteristics and performance. Using the formula, a new guideline is proposed to determine performance of a yacht.

• Journal of Welding and Joining
• /
• v.30 no.1
• /
• pp.72-77
• /
• 2012

Recently, according to the increase of income and development of quality of life, the leisure industry has been developed. In particular, the interest of design and manufacture technology of leisure yacht has significantly increased. However, domestic market of leisure ships is currently in its initiating stage. So research and development for structural strength of leisure yacht need to be investigated. In this study, lug of yacht's mast which is known for a critical damage region is explicitly considered. This paper deals with the estimation of stress concentration factors (SCFs) for lug of yacht's mast depending on dimensions of lug using hot spot stress. Also, SCF formulae is suggested using parametric study.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.3
• /
• pp.233-240
• /
• 2005

A model test was carried out, in order to verify the hydrodynamic performances of public 30 feet class sailing yacht. In the initial design stage, the performances and the running attitude of sail yacht including the hull form and sail plan, appendages were estimated by VPP, from which made the representative test conditions. A new experiment system such as captive model device was composed because the running attitude could be changed by wind conditions. The test results show that the minimum resistance is generated in the heeling 20 degree, which was expected in the initial design stage. It is thought to be the useful informations that the keel has au effects on hydrodynamic forces and resistance differences between the upwind and the downwind condition.