• KCI Concrete Journal
• /
• v.11 no.3
• /
• pp.211-221
• /
• 1999

A method to determine the fracture energy of concrete is investigated. The fracture energy may be calculated from the area under the complete load-deflection curve which can be obtained from a stable three-point bend test. Several series of concrete beams have been tested. The Present experimental study indicates that the fracture energy decreases as the initial notch-to-beam depth ratio increases Some problems to be observed to employ the three-point bend method are discussed. The appropriate ratio of initial notch-to-beam depth to determine the fracture energy of concrete is found to be 0.5. It is also found that the influence of the self-weight of a beam to the fracture energy is very small A simple and accurate formula to predict the fracture energy of concrete is proposed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.211-212
• /
• 2011

The construction industry has become larger and higher in size. The process of high-rise building construction is complicated and has various conditions affecting productivity. Analysing productivity in high-rise buildings is difficult despite the various productivity analysis methods. In this study, data was collected from actual construction site to analyse the productivity of curtain wall operation by means of Work sampling and Method Productivity Delay Model. As a result, this paper suggests advantages and disadvantages deducted from comparing the two productivity analysis methods.

• Korean Institute of Interior Design Journal
• /
• no.29
• /
• pp.211-219
• /
• 2001

Dematerialization of consumption is in a rapid process, in relation to the flood of information. Consumers do not want to buy a material goods any more, in the condition of excessive supply. In the past industrial society with massive production and consumption, only the unified consumers were produced. In informational society, goods are not regarded as a simple material, but as an Intelligence Merchandise. Specialty shops for life articles should reflect these consumer's trend and should keep the value of brand and goods. Visual Merchandising strategy which connect the expectation of consumers and company images, should be considered as a communication tools, and be presented in diverse and specified ways.

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.209-211
• /
• 2015

Evaporation characteristics of a single droplet of carbon nanofluids were investigated in a rapid compression machine(RCM). n-Heptane and carbon black N990 were used to synthesize the carbon nanofluids. RCM is an experimental set-up to simulate a single compression stroke of reciprocating engine. Temperature and pressure in a reaction chamber were measured during the compression stroke. After the piston reaches top dead center(TDC), temperature and pressure decreased due to the heat loss at wall. In that process, a single droplet of carbon nanofluids underwent unsteady condition. A single droplet was put at the center of reaction chamber. Thermocouple whose tip is $50{\mu}m$ was used not only to measure transient bulk temperature, but also to suspend the droplet. The picture of single droplet was taken using high speed camera with a frame rate of 500 fps. From those pictures, the droplet diameter was measured by visual basic program.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.59-62
• /
• 2003

This study investigated the phase transformation of the $REBa_2Cu_3O_{7-x}$ (RE=Nd, Gd, By) superconductor, and CCT (Continuous-Cooling-Transformation) along with the TTT (Time-Temperature-Transformation) diagrams are suggested according to the isothermal and continuous cooling heat-treatments. According to result of fabricated single crystal of RE-123 superconductor through TSMG method based on phase transformation neted among heat treatment process, when the ionic radius elements was decreased, RE-211 phase was well-distributed. According to result that examine about seed of pretreatment effect of TSMG method, magnetic hysteresis improved when preprocess among oxygen atmosphere in same seed. and used after. Effect of miscut expressed good superconducting special quality in case miscut uses big seed.

• Journal of Hydrogen and New Energy
• /
• v.17 no.2
• /
• pp.204-211
• /
• 2006

The electrolyte in the solid oxide fuel cell must be dense enough to avoid gas leakage and thin enough to reduce the ohmic resistance. In order to manufacture the thin and dense electrolyte layer, 8 mol% $Y_2O_3$ stabilized-$ZrO_2$ (8YSZ) electrolyte layers were coated on the porous tubular substrate by the novel vacuum slurry dip-coating process. The effects of the slurry concentration, presintering temperature, and vacuum pressure on the thickness and the gas permeability of the coated electrolyte layers have been examined in the vacuum slurry coating process. The vacuum-coated electrolyte layers showed very low gas permeabilities and had thin thicknesses. The single cell with the vacuum-coated electrolyte layer indicated a good performance of $495\;mW/cm^2$, 0.7 V at $700^{\circ}C$. The experimental results show that the vacuum dip-coating process is an effective method to fabricate dense thin film on the porous tubular substrate.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.2
• /
• pp.83-87
• /
• 2003

$(Nd/Y)_{1.8}Ba_{}2.4Cu_{3.4}O_{7-x}$high $T_c$ superconductor was directionally grown by floating Bone melt growth process with a large temperature gradient in air. Cylindrical green rods of (Nd/Y)1.8 oxides were fabricated by cold isostatic pressing (CIP) method using rubber mold. Microstructures were observed by SEM and TEM and superconducting properties were measured by a SQUID magnetometer. Nonsuperconducting $(Nd/Y)_2BaCuO_5$ inclusions were uniformly distributed within the superconducting $(Nd/Y)Ba_2Cu_3O_x$ matrix. The directionally melt-textured (Nd/Y) 1.8 superconductor showed an onset Tc $\geq$ 90 K and a sharp superconducting transition.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.3
• /
• pp.52-66
• /
• 2017

This study aims at designing standard metadata that can be incorporated for advanced utilization of damage prediction maps, and thereby constructing the standard meta-information management prototype system on the basis of the proposed design. Based on the ISO/TC 211 19115 international standard, which is considered as the most widely used standard (as per the results of a domestic and foreign metadata standard survey), the designing process for the standard metadata was established and the metadata was categorized into nine classes. Additionally, based on the output of the standard metadata design process, a standard meta-information management prototype system, capable of checking and downloading meta-property information, was constructed using the JAVASCRIPT language. By incorporating the obtained results, it is possible to maintain the quality of the constructed damage prediction map by establishing a standardized damage prediction map database. Furthermore, disaster response can be actuated through the provision and management of data for effective operation of the proposed damage prediction system.

• Journal of the Korea Concrete Institute
• /
• v.22 no.3
• /
• pp.313-324
• /
• 2010

There are many problems in application of FRP reinforcing bars as shear reinforcement, since bending of FRP bars is not a feasible process on construction site. Even though FRP bars can be manufactured in bent shape, they have lower strength at bent location. However, there are no serious problems to use FRP bars as flexural reinforcement. Plates or slabs like bridge decks, in general, do not need shear reinforcements. These types of members with FRP flexural reinforcement have lower shear strength than those with conventional steel flexural reinforcement. However, reliable process or equation for shear strength estimation of FRP reinforced concrete without shear reinforcement are not established, yet. In this study, predicted shear strength obtained from available design equations and assessment equations are compared with 211 experimental results. The results showed that among the current design codes, the Architectural Institute of Japan (AIJ) and the Institution of Structural Engineers (ISE) provided the best estimation. ACI 440.1R-06 provided conservative results with degree of dispersion similar to that of ISE. In addition, regression analysis on the collected experimental results was conducted to develop regression models. As a result, a new reliable shear strength equation was proposed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.317-328
• /
• 2018

The purpose of this study is to examine the effect of the quality of performance on audience satisfaction, and to verify the mediating effect of service value and traditional image in this process. The subjects of this study included 211 male and female adults who experienced the Korean opera performance in Seoul, Korea in October. Collected data was used as a model of path coefficients obtained through analysis of covariance structure and hypothesis test. As a result of verification, program quality, physical environment quality, and quality of the stage performance perceived by the audience showed a statistically significant positive correlation with performance experience attributes. The path coefficient between performance attribute and service value, performance experience attribute and traditional image were also positively and statistically significant. Further, the path coefficient between performance experience and audience satisfaction showed a positive relationship. The service value and traditional image, service value and audience satisfaction, and the path coefficient between traditional image and audience satisfaction were statistically and positively significant. Finally, all hypotheses were adopted and study results confirmed the effect of service quality and experience attributes on audience satisfaction for the popularization, modernization and marketing strategy of the Korean opera. In this process, it is meaningful to verify the role and function of service value and traditional image.