• 한국자동차공학회논문집
• /
• 제4권3호
• /
• pp.211-219
• /
• 1996

In a small high-speed D. I. diesel engine, the injected fuel spray into the atmosphere of the high temperature is burnt by go through the process of break up, atomization, evaporation and process of ignition. These process are important to decide the emission control and the rate of fuel consumption and out put of power. Especially, in the case of injected fuel spray impinging on the wall of piston cavity, the geometry of piston cavity gives great influence the ignitability of injected fuel and the flame structure. Ordinary, the combustion chamber of driving engine have unsteady turbulent flow be attendant on such as the change of temperature, velocity and pressure. So the analysis of spray behavior is difficult. In this study, the spray was impinged on the wall of 3 types of piston cavity such as Dish, Toroidal, Re-entrant type, in order to analyze the combustion process of impinging spray precisely and systematically. And hot wire probe was used for analyze non-steady flow characteristics of impinging spray, and to investigate the behavior of spray, the aspects of concentration c(t), standard deviation σ(t) and variation factor(vf) was measured with the lapse of time.

• 한국세라믹학회지
• /
• 제42권3호
• /
• pp.211-217
• /
• 2005

펄스 마그네트론 스퍼터링법을 이용하여 Co농도 변화에 따라 유리 기판 위에 ZnJ-xcoxo 박막을 제조하였다. Co 농도의 증가에 따라 $Zn_{1-x}Co_{x}O$ 박막의 c축 결정 배향성은 향상되었다. 표면 형상 분석을 통하여 매우 치밀한 박막이 성장되었음을 찰 수 있었다. 박막의 UV-visible투과율 측정 결과, $Co^{2+}$ 이온에 의한 sp-d상호교환 작용과 d-d 천이를 확인할 수 있었다. $Zn_{1-x}Co_{x}O$ 박막의 비저항은 $10^{-2}\~10^{-3}\;\Omega{\cdot}cm$의 값을 가지며 Co농도의 증가에 따라 박막의 비저항은 증가하였고, 특히 $30\;at\%$ Co에서는 박막의 결정성 저하로 인하여 급격한 비저항 증가가 발생하였다. X-ray photoelecoon specooscopy분석을 통해 Co와 O 간의 결합 상태를 확인하였으며, alternating gradient magnetometer측정 결과 $Zn_{1-x}Co_{x}O$ 박막의 상온 강자성 치력 현상을 관찰할 수 있었다. 낮은 비저항 및 상온 강자성 이력 특성을 갖는 $Zn_{1-x}Co_{x}O$ 박막은 자성 반도체 소자로의 응용 가능성을 나타내었다 .

• 한국세라믹학회지
• /
• 제43권2호
• /
• pp.98-105
• /
• 2006

YBCO film was synthesized by using a new approach to the TFA-MOD method. In the fabrication process, $Y_2Ba_1Cu_1O_x\;and\;Ba_3Cu_5O_8$ powders were used as precursors (the so called '211 process'), instead of Y-, Ba-, and Cu-based acetates, and dissolved in trifluoroacetic acid followed by calcining and firing heat treatment. Consequently, we successfully fabricated YBCO film and evaluated the phase formation, texture evolution, and critical properties as a function of the calcining and firing temperature and humidity, in order to explore its possible application in coated conductor fabrication. The films were calcined at $430-460^{\circ}C$ and then fired at $750-800^{\circ}C\;in\;a\;0-20\%$ humidified $Ar-O_2$ atmosphere. We observed that $BaF_2$ phase was effectively reduced and that a sharp and strong biaxial texture formed under humidified atmosphere leading to increased critical properties. In addition, we found that the microstructure varied significantly with the firing temperature: the grain grew further, the film became denser, and the degree of texture and phase purity varied as the firing temperature increased. For the film fired at $775^{\circ}C$ after calcining at $460^{\circ}C$, the critical current was obtained to be 39 A/cm-width (corresponding critical current density is $2.0\;MA/cm^2$ which was probably attributed to such factors as the enhanced phase purity and out-of-plane texture, the moderate film density and grain size, and crack-free surface.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권4호
• /
• pp.19-23
• /
• 2019

A large grain YBCO bulk superconductor is fabricated by the top-seeded melt growth (TSMG) method. In the TSMG process, the seed crystal is placed on the top surface of a partially melted compact and therefore the seed crystal is frequently tilted during the melt process due to intrinsic unstable nature of Y211 particle +liquid phase mixture. In this work, we report the successful growth of single-domain YBCO bulk superconductors by a bottom-seeded melt growth (BSMG) method. Investigations on the trapped magnetic field and the microstructures of the synthesized specimens show that a bottom-seeded melt growth method has hardly affected on the crystal growth behavior, the microstructure development and the magnetic properties of the large grain YBCO bulk superconductors. The bottom-seeded melt growth method is clearly beneficial for the stable control of seed orientation through the melt process for the fabrication of a large grain YBCO bulk superconductor.

• 산업기술연구
• /
• 제20권A호
• /
• pp.211-218
• /
• 2000

It is desirable but difficult to predict springback quantitatively and accurately for successful tool and process design in sheet stamping operations. The result of springback analysis by the finite element method (FEM) is sensitively influenced by numerical factors such as blank element size, number of integration points, punch velocity, contact algorithm, etc. In the present work, a parametric study by Taguchi method is performed in order to evaluate the influence of numerical factors on the result of springback analysis quantitatively and to obtain the combination of numerical factors which gives the best approximation to experimental data. Since springback is determined by the residual stress after forming process, it is important to evaluate stress distribution accurately. The oscillation in the time history curve of stress obtained by the dynamic-explicit finite element method says that the stress solution at termination time is in very unstable state. Therefore, a variability study is also carried out in this study in order to assess the stability of implicit springback analysis starting from the stress solution by explicit forming simulation. The U-draw bending process, one of the NUMISHEET '93 benchmark problems, is adopted as an application model because it is most popular one for evaluating the springback characteristic.

• 산업공학
• /
• 제16권2호
• /
• pp.211-221
• /
• 2003

This paper introduces a simulation study regarding the design for the installation of Color Rescheduling Storage (CRS) in an automobile factory. In the painting shop the colors of vehicles are changed frequently according to the assembly schedule. When the color of a vehicle is changed from one to another, the cleaning process of painting-gun is necessary and it generates costs. Therefore many of the automobile manufacturers equip the CRS in front of the Top Coat Booth of the painting shop. The major objective of CRS is to reduce the change over cost in the painting process by grouping vehicles having same color. In this paper the configuration of CRS and the input/output algorithms are explained. The suggested system is verified using simulation models and experiments are conducted. Finally the best alternative is suggested by sensitivity analysis and evaluation of investment feasibility.

• 지식경영연구
• /
• 제18권4호
• /
• pp.181-211
• /
• 2017

Despite a growing literature focusing on technological development as a key driving force behind the economic performance of a firm or a nation's industy, we still fall short of a comprehensive understanding of how each of the elements required of technological developent and innovation fits togther and leads to economic progress and industry change. This paper seeks to fill this gap by bringing together some of key insights from the theory and research on the coevolutionary process of technology, organizations, and industry, and on the role of institutions in this process. By combining a diverse array of research streams, we provide a broad suvey of foundational work on the following two questions: (1) how the creation and diffusion of innovation occurs and gives rise to structural reconfigurations of the industry, (2) how organisations and technology coevolve, and (3) what is the role of institutions in this coevolutionary process? Based on this literature survey, we also offer a synthesis that can serve as a ground that allows a more nuanced understanding of the sources, dynamics and impacts of technological development and innovation, and interrelationships among technology, organizations and industry change.

• 한국조리학회지
• /
• 제9권3호
• /
• pp.197-211
• /
• 2003

It is widely agreed that customers' purchase are strongly influenced by their emotions. despite the obvious importance of eliciting positive emotional responses from customers, we find no record that family restaurants have ever measured or used customers' emotions as a management tool. This study aimed to verify the importance of the customers' emotion in the relational performance of family restaurant business. In order to achieve the object of the study, the effect of emotional factors on service satisfaction, revisit, word-of-mouth were analysed. The data were collected from 450 customers who had visited five family restaurants in Seoul more than once during the last three months from September 20 to October 5, 2002. Emotional variables in service experience process were grouped as three factors; in the middle of having food, in entering and leaving restaurant and in the waiting line. It is proved that customers had different emotions in each process of family restaurant service experience. Multiple regression analysis was employed to explore the influence of three emotional factors on relational performances such as satisfaction, revisit and word-of-mouth. It was found that customers were influenced by emotional factors in entering and leaving restaurant, secondly influenced in the waiting line and least influenced in the middle of having food. Finally, the findings indicated that customers' emotional factors in whole service experience process from entering to leaving the restaurant should be successfully cared by service staff. Future research is recommended to find out which specific emotional factors affected on relational performance of family restaurant.

• 한국주조공학회지
• /
• 제26권5호
• /
• pp.211-216
• /
• 2006

The study for thixoextrusion process of 7075, 7003 Al wrought alloys and AZ31 Mg wrought alloy was carried out with respect to reheating rate, isothermal holding temperature and time with an emphasis to the effect of homogenization on thixotropic micro-structures during the partial remelting, especially in the low liquid fraction ($f_L<0.2$). The liquid fraction and average grain size with respect to reheating profile such as reheating rate, isothermal holding temperature and time were almost uniform. It is considered very useful for thixoextrusion in terms of process control such as billet temperature control and actual extrusion time. Micro-structural controls of 7075, 7003 Al wrought alloys and AZ31 Mg wrought alloy before and after homogenization were available and thixotropic microstructures were obtained in both specimens.

• 전기전자학회논문지
• /
• 제4권2호
• /
• pp.202-211
• /
• 2000

회로 시뮬레이터인 SPICE를 이용하여 1.9GHz 대역의 CMOS up-conversion 믹서를 설계하였고, 회로 설계를 위한 시뮬레이션 과정을 소자 모델링을 포함하여 상세히 설명하였다. $0.5{\mu}m$ 표준 CMOS 공정을 이용하여 칩을 제작한 결과, 제작된 칩의 특성과 초기 시뮬레이션에 의해 예상되는 특성 사이에 큰 차이점이 발견되어 이에 대한 원인 분석을 시도하였다. 발견된 문제점들을 고려한 경우의 시뮬레이션을 통해 시도한 시뮬레이션 방법의 타당성을 증명하였고, 이러한 문제점들을 보완할 경우 사용한 표준 CMOS 공정으로도 GaAs MESFET 공정을 사용한 유사 칩의 특성에 근접하는 칩 특성의 구현이 가능함을 보였다.