• ETRI Journal
• /
• 제26권4호
• /
• pp.292-296
• /
• 2004

In this paper we present a new current-mode electronically tunable universal filter using only plus-type current controlled conveyors (CCCII+s) and grounded capacitors. The proposed circuit can simultaneously realize lowpass, bandpass, and highpass filter functions - all at high impedance outputs. The realization of a notch response does not require additional active elements. The circuit enjoys an independent current control of parameters $\omega_0$ and $\omega_0/Q$. No element matching conditions are imposed. Both its active and passive sensitivities are low.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1896-1898
• /
• 2001

An offset problem caused by the static parasitic capacitors is analyzed and then some techniques to reduce their effect on the capacitive position sensor are presented. Also new offset compensation technique is proposed that by adjusting the magnitudes of the modulating signals independently, the charge imbalance between electrodes caused by the parasitic capacitors is eliminated without sensor gain variation. Simulation results are given to validate the proposed compensation technique.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.243-245
• /
• 2000

In general, aluminum electrolytic capacitors are used in the DC link of PWM inverters fur ac motor drives. The capacitor usually has the shortest lifetime in the system and then determines the lifetime of the inverter system. In this paper, a method of capacitor lifetime estimation is proposed by using an ESR(equivalent series resistance) model and a heat transfer model of capacitor, from which internal operating temperature is estimated. Then, the lifetime is predicted by Arrhenius's equation. A practical example is presented.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.338-341
• /
• 2003

In this paper, we designed and implemented a microstrip directional coupler that has high directivity at 2.14 GHz. To design coupler that has high directivity, we used interdigital capacitors instead of lumped elements. The measured results show the diretivity is higher than 30 dB at 2.14 GHz.

• 전기의세계
• /
• 제22권6호
• /
• pp.24-32
• /
• 1973

When applying capacitors to distribution line, an effort must be made to determine the economic benefits resulting from the installation of a capacitor. There have been many papers and articles published on the economics of capacitors. Most of these are special cases, or have so many qualifications that they are not much use for other cases unless very careful attention is given to minute details. A general economic analysis on a distribution line is very complicated problem. Consequently, a diagram solution is illustrated for determining the economic condenser and applying resonably well for the distribution line with any load division.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1388-1390
• /
• 1994

A polyimide-based capacitive humidity sensor has been designed and fabricated using silicon integrated-circuit technology, and its performance measured. The sensor showed excellent linearity, low temperature coefficient, and low hysteresis over a wide range of relative humidity and temperature. The signal conditioning circuits for detecting relative humidity and converting it to voltage have been developed based on a charge redistribution between capacitors using switched -capacitors.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1614-1617
• /
• 2002

This paper studies basic phenomena of intermittently coupled capacitors circuits. As an analysis tool, we introduce Hybrid return map of real and binary variables, and analyze bifurcation phenomena for three parameters . Co-existence of synchronous phenomena is also shown. Using a simple test circuit, typical phenomena see verified in the laboratory.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권4호
• /
• pp.170-176
• /
• 2003

This paper introduces an improved pulse generator using power semiconductors and L-C circuit. The proposed circuit consists of the series connected boost converter structure. In the presented circuits, high voltage pulse is generated by series-connection of capacitors and IGBTs. The charging of capacitors and voltage balance of IGBTs are obtained automatically. To verify the proposed circuit, 1.8㎸, 40A pulse generator is manufactured and tested.

• 전기저널
• /
• 10호통권142호
• /
• pp.27-34
• /
• 1988

• 한국인터넷방송통신학회논문지
• /
• 제23권4호
• /
• pp.59-64
• /
• 2023

본 논문은 전자기기에 사용되는 전원의 노이즈 저감을 위한 전도성(Conducted) EMI 필터의 경험적 설계를 통하여 제안하였다. 제안된 구조는 A형, B형, C형, D형의 구조를 설계하였으며, 다양한 X-커패스터와, Y-커패스터, Air-인덕터로 LC 네트워크 사용으로 전도성 노이즈 저감을 확인하였다. L1, L2는 10[μH]를 사용하였으며, C1, C2는 4.7[nF]를 사용하였다. 공통모드(Common Mode)용 L3는 13[μH]를 사용하였으며, C5, C6, C7은 10[nF]을 사용하여 설계하였다. 설계된 EMI 필터의 측정된 삽입손실 값은 3.2MHz에서 -74.4[dB], 4MHz에서 -75.4[dB], 13.56MHz에서 -75.3[dB]로 나타났다. 따라서 제안한 EMI 필터는 다양한 전자기기에 사용되는 전원 노이즈 저감에 이용될 것이다.