• 한국전산유체공학회지
• /
• 제9권1호
• /
• pp.41-47
• /
• 2004

A successful store separation analysis tool, MSAP(Multi-body Separation Analysis Program) has been applied to F/A-18C/JDAM CFD Challenge Ⅱ. The challenge was devised to challenge CFD community to use CFD methodologies to predict and match the trajectory of a JDAM MK-84 separating from F/A-l8C. Trajectory simulations for two flight conditions were performed. Comparison between computed and measured flight trajectories for both conditions shows a good agreement.

• 멤브레인
• /
• 제10권2호
• /
• pp.55-65
• /
• 2000

다공성 실리카 막을 졸겔법에 의해서 Si(${OC}_2H_5)_4-H_2O$ 로부터 제조하고, 막의 특성을 TG-DTA, XRD, IR, BET, SEN, TEM을 사용하여 조사하였다. 다공성 실리카 막 제조를 위한 Si(${OC}_2H_5)_4$ : $H_2O4$ : $H_2O$ : $C_2H_5{OH}$의 최적 몰비는 1 : 4.5 : 4 이었다. 100$^{\circ}C$~1100$^{\circ}C$~에서 열처리된 막의 비표면적은 3.8 $m^2$/g~902.3$m^2$/g 이었으며, 기공크기는 20$\AA$~50$\AA$이었다. 300$^{\circ}C$~~700$^{\circ}C$~범위에서 열처리된 막의 입자크기는 15nm~30nm이며, 열처리 온도가 증가하면 입자의 크기도 증가하였다. 이렇게 제조한 다공성 실리카 막으로 $H_2$/$N_2$ 혼합기체를 분리하는데 응용하였으며, 다공성 실리카 막에 의한 $H_2$/$N_2$혼합기체분리는 Knudsen flow와 surface flow에 의해서 일어나며 주로 surface flow에 의존하였다. 다공성 실리카 막의 $H_2$/$N_2$ 혼합기체에 대한 real separation factor($\alpha$)는 155.15 cmHg($\Delta$P)와 $25^{\circ}C$에서 5.17이었으며, real separation factor($\alpha$), head separation factor ($\beta$), tail separation factor$\bar{B}$)는 압력이 증가하면 증가하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 추계 학술대회논문집
• /
• pp.89-94
• /
• 2003

A successful store separation analysis tool, MSAP(Multi-body Separation Analysis Program) has been applied to F/A-18C/JDAM CFD Challenge II. The challenge was devised to challenge CFD community to use CFD methodologies to predict and match the trajectory of a JDAM MK-84 separating from F/A-l8C. Trajectory simulations for two flight conditions were performed. Comparison between computed and measured flight trajectories for both conditions shows a good agreement.

• Toxicological Research
• /
• 제5권2호
• /
• pp.89-96
• /
• 1989

Rapid and complete epidermal-dermal separation procedure were determined in neonatal rat skin by light microscopic observation and by compairing enzyme activities in the separated epidermis. Microscopic appearance demonstrated the at four different separation procedures used in the study resulted in good separation of epidermis from dermis` heating method (i.e., immersion in 55C water for 30 sec, followed by immersion in 0-4C water) and microwave irradiation for 10 sec were saving time.

• Journal of Magnetics
• /
• 제15권2호
• /
• pp.91-98
• /
• 2010

The paper presents results of a study on the selective separation technology of ferrous and non-ferrous metals from broken light bulbs. The proposed method is to use magnetic fluids to obtain a magnetic fluid based- separation. [1] The study was conducted using three types of waste materials: regular light bulbs, auto light bulbs and neon tubes. In order to process the waste materials, a six stages technologic flow was developed: a) separation of light bulbs components; b) Physical and chemical analysis of raw materials; c) grain conditioning of the raw material; d) dry magnetic separation of ferrous components; e) magnetic fluid separation of non-magnetic material; f) recovery of the magnetic fluid adhered to the surface of the separated material grains. [2] This study shows that magnetic fluid separation is only profitable for regular and auto light bulbs and is not profitable in the case of neon tubes.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.131-136
• /
• 2008

The oil separation in an oil separator is one of the most important characteristics for proper compressor operation. In this study, a gravity type of oil separator is used. Oil separation characteristics has been investigated for $CO_2$/PAG mixture in the range of oil concentration 0 to 5 weight-percent and the mixture temperature range of $5^{\circ}C$ to $15^{\circ}C$ and $70^{\circ}C$ to $90^{\circ}C$. The results obtained indicate that the oil separation is increased with an increase in the oil concentration. It is also found that the oil separation in liquid state is increased with an increase in the mixture temperature while the oil separation in gas state is decreased.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제17권3호
• /
• pp.88-93
• /
• 2009

Lubricant oil is needed in air conditioning and refrigeration system because the compressor requires oil to prevent surface to surface contact between its moving parts, to remove heat, to provide sealing, to keep out contaminants, to prevent corrosion, and to dispose of debris created by wear. Thus, the oil separation in an oil separator is one of the most important characteristics for proper compressor operation. In this study, a gravity type of oil separator is used. Oil separation characteristics have been investigated for $CO_2$/PAG mixture in the range of oil concentration 0 to 5 weight-percent and the mixture temperature range of $0^{\circ}C$ to $15^{\circ}C$ at 50 bar and $70^{\circ}C$ to $90^{\circ}C$ at 80 bar. The results obtained indicate that the oil separation is increased with an increase in the oil concentration. It is also found that the oil separation in liquid state is increased with an increase in the mixture temperature while the oil separation in gas state is decreased.

• 멤브레인
• /
• 제13권4호
• /
• pp.291-299
• /
• 2003

PTMSP-PEI와 PDMS-PEI 복합막을 제조하고, 막의 특성을 FT-IR, $^1H-NMR,$ DSC, TGA, GPC, SEM을 사용하여 조사하였다. 제조된 PTMSP의 수평균분자량 (equation omitted)은 477,920 이었고, 중량평균분자량 (equation omitted)은 673,329이었고, 유리전이온도 ($T_g$)는 $224^{\circ}C$이었다. 제조된 고분자 복합막들에 의한 $H_2/N_2$ 혼합기체분리는 $25^{\circ}C$에서 압력의 변화에 따라 조사되었다. PTMSP-PEI와 PDMS-PEI 복합막들의 수소에 대한 분리인자 (${\alpha}, {\beta},$ equation omitted)값은 투과셀의 압력이 증가하면 증가하였다. PTMSP-PEI 복합막의 수소에 대한 (${\alpha}, {\beta},$ equation omitted 값은 ${\Delta}P$ 30psi 와 $25^{\circ}C$에서 2.28, 1.17, 1.96이었고, PDMS-PEI 복합막의 (${\alpha}, {\beta}$ equation omitted 값은 3.70, 1.53, 2.42 이었다.

• 멤브레인
• /
• 제14권4호
• /
• pp.312-319
• /
• 2004

졸겔법에 의해 Si(OC$_2$$H_5$/)$_4$-($CH_3$O)$_3$B-C$_2$$H_5$OH-$H_2O$계로부터 다공성의 SiO$_2$-B$_2$O$_3$ 막을 제조하였다. SiO$_2$-B$_2$O$_3$막의 특성을 BET, IR spectrophotometer, X-ray diffractometer, SEM 과 TEM을 사용하여 조사하였다. $700^{\circ}C$에서 얻어진 SiO$_2$-B$_2$O$_3$ 막의 평균 기공직경은 0.0048 $\mu\textrm{m}$이고, 표면적은 354.398 $m^2$/g이었으며, 입자의 크기는 7 nm인 무정형의 다공체이었다. SiO$_2$-B$_2$O$_3$ 막의 수소/질소 혼합 기체 분리 특성은 기체분리 압력을 달리하여 조사하였다. $25^{\circ}C$, ΔP 155.15cmHg에서 수소/질소 혼합 기체를 분리하여 본 결과 SiO$_2$-B$_2$O$_3$ 막의 수소에 대한 real separation factor($\alpha$)는 4.68이었다. 그리고 투과셀의 압력차(ΔP)값이 증가할수록 real separation factor($\alpha$), head separation factor($\beta$), tail separation factor((equation omitted))값이 증가하였다.

• 한국경영과학회지
• /
• 제36권2호
• /
• pp.43-50
• /
• 2011

We consider the separation problem of the rank-1 Chvatal-Gomory (C-G) inequalities for the 0-1 knapsack problem with the knapsack capacity defined by an additional binary variable, which we call the fixed-charge 0-1 knapsack problem. We analyze the structural properties of the optimal solutions to the separation problem and show that the separation problem can be solved in pseudo-polynomial time. By using the result, we also show that the existence of a pseudo-polynomial time algorithm for the separation problem of the rank-1 C-G inequalities of the ordinary 0-1 knapsack problem.