Browse > Article

An Experimental Study on Oil Separation Characteristics of $CO_2$/P AG Oil Mixture in an Oil Separator  

Kang, Byung-Ha (School of Mechanical and Automotive Engineering, Kookmin University)
Kim, Kyung-Jae (Graduate School of Mechanical Engineering, Kookmin University)
Lee, Sung-Kwang (Graduate School of Mechanical Engineering, Kookmin University)
Publication Information
International Journal of Air-Conditioning and Refrigeration / v.17, no.3, 2009 , pp. 88-93 More about this Journal
Lubricant oil is needed in air conditioning and refrigeration system because the compressor requires oil to prevent surface to surface contact between its moving parts, to remove heat, to provide sealing, to keep out contaminants, to prevent corrosion, and to dispose of debris created by wear. Thus, the oil separation in an oil separator is one of the most important characteristics for proper compressor operation. In this study, a gravity type of oil separator is used. Oil separation characteristics have been investigated for $CO_2$/PAG mixture in the range of oil concentration 0 to 5 weight-percent and the mixture temperature range of $0^{\circ}C$ to $15^{\circ}C$ at 50 bar and $70^{\circ}C$ to $90^{\circ}C$ at 80 bar. The results obtained indicate that the oil separation is increased with an increase in the oil concentration. It is also found that the oil separation in liquid state is increased with an increase in the mixture temperature while the oil separation in gas state is decreased.
Oil concentration; PAG(Poly Alkylene Glycol) oil; Carbon dioxide; Oil separator;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Lee, J. P., 2002, An experimental and theoretical investigation of oil retention in a carbon dioxide airconditioning systems, PhD Thesis, CEEE, University of Maryland, College Park, MD
2 Kim. J. M., Lee. J. H., Yoon. Y. K. and Kim. H. D., 2007, A study of the performance improvement of a centrifugal separator for gas-liquid two-phase flow, The Korean Society of Mechanical Engineers, Vol. 5 pp. 3352-3357
3 Sumida, Y., Nakayame, M., Suzuki, S. and Kawaguchi, S., 1998, Alkylbenzene for split air conditioner with R-410A Part2: Oil return characteristics, Proc. 14th International Compressor Engineering Conference at Purdue, pp. 471-476
4 Cremaschi, L., Hwang, Y. and Radermacher, R., 2004, Investigation of oil retention in residential heat pumps, Proc. 10th International Refrigeration Conference at Purdue, Paper No. R104
5 Andresen, P. A. K. and Richard, A. J. S., 2000, Stability of model emulsions and determination of droplet size distributions in a gravity separator with different inlet characteristics, Colloids and Surfaces A: Physicochemical and Engineering Aspects 170 pp. 33-44   DOI   ScienceOn
6 Lim, T. W. and Kim, J. H., 2003, A study on pressure drop in two-phase flow boiling of refrigerants in horizontal tube, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 15, No. 6, pp. 510-517   과학기술학회마을   ScienceOn
7 Mori, K., Onishi, J., Shimaoka, H., Nakanishi, S. and Kimoto, H., 2002, Cooling heat transfer characteristics of CO2 and CO2-oil mixtures at supercritical pressure conditions, Proceeding of the Asian Conference on Refrigeration and Air Conditioning 2002, pp. 81-86
8 Kang, B. H. and Lim, D. S., 2008, Flow and heat transfer characteristics of CO2/oil mixtures in a circular tube, International Journal of Air-Conditioning and Refrigeration Vol. 16, No. 4, pp. 117-123   과학기술학회마을   ScienceOn
9 Fung, K. and Sundaresan, S. G., 1994, Study of oil return characteristics in a display case refrigeration system. comparison of different lubricants for a HFC-bend Refrigerant, Proc. 5th International Refrigeration Conference at Purdue, pp. 121-128