• Journal of ILASS-Korea
• /
• v.23 no.4
• /
• pp.185-191
• /
• 2018

Benzene, toluene, ethylbenzene and xylene (BTEX) were well known as ozone precursors from photochemical reactions and contribute to the formation of photochemical smog which pose health hazards. Also, some of these compounds directly affect the human health due to their toxicity such as benzene. In this study, BTEX ratios and correlation of $C_2$-benzenes (xylenes, ethylbenzene) in vehicle exhaust from recreational vehicle (RV) and multi-purpose vehicle (MPV) were characterized using a chassis dynamometer. VOCs were collected by tedlar bag and a GC/MS system was used for their quantification. Among all of the BTEX, toluene has the highest concentration(more than 30% in composition of BTEX). The average ratio of toluene to benzene emissions (T/B ratio=2.2) was found in vehicle exhaust. The average m,p-xylene/ethylbenzene and m,p-xylene/o-xylene ratios were 1.0 and 3.0 respectively. As a result, it showed a good correlation between the $C_2$-benzenes ($R^2=0.98{\sim}0.99$). In the future, it can be used as a marker for effect evaluation to atmospheric environment by vehicle exhaust.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2553-2559
• /
• 2012

The adsorption properties of benzene, toluene, p-xylene in MCM-41 with heterogeneous and cylindrical pore were studied using grand canonical ensemble Monte Carlo simulation. The simulated isotherms were compared with experimental ones, and the different adsorption behaviors in MCM-41 with pore diameters of 2.2 and 3.2 nm were investigated. The simulated adsorption amounts above the capillary-condensation pressure agreed with the experimental ones. The simulation results showed that most molecular planes were nearly parallel to the pore axis. This orientation was not affected by the molecular position in the pore. The molecular planes were nearly parallel to the pore surface for the adsorbate molecules close to the pore wall, and the molecules in the MCM-41 with the pore diameter of 3.2 nm were ordered along the pore axis.

• Analytical Science and Technology
• /
• v.16 no.4
• /
• pp.333-338
• /
• 2003

Inclusion selectivity of a three-dimensional piperazine-ligated cyanocadmate host complex, $[Cd_x(CN)_{2x}\{HN(CH_2CH_2)_2NH\}_y]{\cdot}zG$, has been investigated for benzene (B), toluene (T), ethylbenzene (E), o- (O), m- (M), and p-xylene (P) isomers as the aromatic guest molecules. From the binary, ternary and quarternary guest mixtures of E and xylene isomer (X), the order of inclusion selectivity in the host complex is O>E>P>M. From the binary to quinary BTX mixtures, the order of preference in the complex is seen to be B>T>O${\gg}$P>M.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.93-94
• /
• 2001

Biofilter operating parameters such as incoming VOCs concentrations, temperature, and packing materials were studied. The performance of a lab-scale biofilter in the treatment of air contaminated with mixtures vac has been evaluated in this study. The biofilter was operated for 80 days packed with compost. Empty bed residence time (EBRT) was 3 to 1.5 min. After 80 days of operation, the removal efficiency was 94% and 73% at $25^{\circ}C$ and $45^{\circ}C$, respectively. Removal efficiencies of m-xylene (93%), o-xylene (92%) and toluene (92%) were better than that of benzene (84.7%).

• Carbon letters
• /
• v.3 no.1
• /
• pp.25-32
• /
• 2002

Aligned multi-wall carbon nanotubes (MWNTs) were synthesized through the catalytic decomposition of hydrocarbons in a quartz tube reactor. In this study, we investigated the influence of reaction parameters such as gas flow rate, ferrocene-xylene ratio and partial pressure, and reaction time on the yield and structure of vertically aligned carbon nanotubes produced by the floating catalyst method. The MWNTs produced had diameters in the range of 20~l00 nm, length around $100{\mu}m$ and bulk density about $0.51g/cm^3$ at a pressure of l0000 psi. It was possible to produce MWNTs with much faster growth rate of $12{\mu}m/min$ than that reported previously by the increase of ferrocene-xylene partial pressure.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.3
• /
• pp.441-446
• /
• 2002

We have presented the results of thermodynamic, structural and dynamic properties of liquid benzene, toluene, and p-xylene in canonical (NVT) ensemble at 293.15 K by molecular dynamics (MD) simulations. The molecular model adopted for these molecules is a combination of the rigid body treatment for the benzene ring and an atomistically detailed model for the methyl hydrogen atoms. The calculated pressures are too low in the NVT ensemble MD simulations. The various thermodynamic properties reflect that the intermolecular interactions become stronger as the number of methyl group attached into the benzene ring increases. The pronounced nearest neighbor peak in the center of mass g(r) of liquid benzene at 293.15 K, provides the interpretation that nearest neighbors tend to be perpendicular. Two self-diffusion coefficients of liquid benzene at 293.15 K calculated from MSD and VAC function are in excellent agreement with the experimental measures. The self-diffusion coefficients of liquid toluene also agree well with the experimental ones for toluene in benzene and for toluene in cyclohexane.

• Korean Journal of Microbiology
• /
• v.17 no.1
• /
• pp.25-41
• /
• 1979

A strain able to grow up m-toluate minimal medium has been isolated after selective enrichment and given the name T81X, which was later identified as pseudomonase putida according to its morphological and biochemical characteristics. After treatment with plasmied specific curing agent, mitomycin C, followed by replica plating on m-toluate and xylene minimal agar plate, T81Xstrain has been shown to harbour a curable plasmid relating to the m-toluate and xylene metabolism. Spontaneous curing frquency of this plasmid was also greatly enhanced by growing on benzoate minimal medium. After then, it was also xylene metabogrowing on benzoate minimal medium. After then, it was found to be conjugally nontransmissible. From the comparative investigation of catechol 1,2-oxygenase and catechol 2,3-oxygenase activities in wild type and cured strain on various growth substrate, it appeared that T81X strain has both of these two enzymes while cured strain has catechol 1,2-oxygenase only. Growing on m-toluate minimal medium T81X strain should carry the genetic information necessary for coding the catechol 1,2-oxygense induced by m-toluate or benzoate, on that curable plasmid.

• Journal of the Korean Society of Safety
• /
• v.10 no.2
• /
• pp.92-96
• /
• 1995

The flash point is generally used as a hazardous index of fire or explosion of a flammable liquid. In this study, the lower flash points and the upper flash points according to the composition of Toluene-o-Xylene and Toluene-Methyl Ethyl Ketone mixtures are determined by air-blowing method. As results, relations between the flash points and the compositions of mixtures ; (1) for Toluene-o-Xylene mixtures $T_{fL}$=25.23 $\alpha$ ＋5.34 $T_{fu}$=27.36 $\alpha$ ＋40.50 (2) for Toluene-Methyl Ethyl Keton mixtures $T_{fL}$=10.00 $\beta$-5.00 $T_{fu}$=16.91 $\beta$＋20.45.

• Journal of Microbiology
• /
• v.35 no.3
• /
• pp.193-199
• /
• 1997

From several industrial wastewaters, 14 bacterial strains which degrade benzene, toluene, o-xylene, m-xylene, or p-xylene (BTX) were obtained. These strains were characterized as to their species composition and the substrate range, kinetic parameters and the substrate interactions were investigated. Although BTX components have a similar chemical structure, isolated strains showed different substrate ranges and kinetic parameters. None of the strains could degrade all of BTX components and most of them showed an inhibition (Haldane) kinetics on BTX, BTX mixtures were removed under inhibitory substrate interactions with variation in the intensity of inhibition. For a complete degradation of BTX, a defined mixed culture containing three different types of patyways was constructed and all of the BTX components were simultaneously degraded with the totla removal rate of 225.69 mg/g biomass/h Judging from the results, the obtained mixed culture seems to be useful for the treatment of BTX-contaminated wastewater or groundwater as well as for the removal of BTX from the contaminated air stream.

• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.331-333
• /
• 2003

The low-pH biofiltration system in laboratory experiments demonstrate defective performance for treating H2S. When leachate pH was in the range of 1.5 to 4, the biofilters in three different media removed H2S wi th efficiencies greater than 99％ while it was treated as a single contaminant. The posibility of using a single-stage low pH biofilter depends on its performance in treating VOCs. During Phase 2, a single-stage biofilter was effective for treating mixtures of H2S and toluene with toluene concentrations below 20ppm and leachate pH between 2 and 3.5. Biofiltration of xylene was ineffective when pH was lower than 1.5. The treatment system acclimated most slowly to benzene, and treatment of benzene was apparently subject to some competive inhibition from xylene and toluene. However. co-treatment was possible after some acclimation time. Xylene was not easily treated, with higher elimination capacities and no sign of competitive inhibition.