• 한국세라믹학회지
• /
• 제50권1호
• /
• pp.70-74
• /
• 2013

Dependence of microwave dielectric properties on the crystallization behaviors of $CaMgSi_2O_6$ (diopside) glass-ceramics was investigated with different heat treatment methods (one and/or two-step). The crystallization behaviors of the specimens, crystallite size and degree of crystallization, were evaluated by differential thermal analysis (DTA), scanning electron microscope (SEM) and X-ray diffraction (XRD) analysis by combined Rietveld and reference intensity ratio (RIR) methods. With an increase in heattreatment temperature, the dielectric constant (K) and the quality factor (Qf) increased due to the increase of the crystallite size and degree of crystallization. The specimens heat-treated by the two-step method had a higher degree of crystallization than the specimens heat-treated by the one-step method, which induced improvement in the quality factor (Qf) of the specimens.

• Journal of Magnetics
• /
• 제14권4호
• /
• pp.161-164
• /
• 2009

Iron-doped $Sn_{1-x}Fe_xO_2$ (x = 0.0, 0.05, 0.1, 0.2, 0.33) thin films on Si(100) substrates and powders were prepared by a chemical solution process. The x-ray diffraction (XRD) patterns of the $Sn_{1-x}Fe_xO_2$ thin films and powders showed a polycrystalline rutile tetragonal structure. Thermo gravimetric (TG) - differential thermal analysis (DTA) showed the final weight loss above $430{^{\circ}C}$ for all powder samples. According to XRD Rietveld refinement of the powders, the lattice parameters and unit cell volume decreased with increasing Fe content. The magnetic properties were characterized using a vibrating sample magnetometer (VSM) and M$\ddot{o}$ssbauer spectroscopy. The thin film samples with x = 0.1 and 0.2 showed paramagnetic properties but thin films with x = 0.33 exhibited ferromagnetic properties at room temperature. Mossbauer studies revealed the $Fe^{3+}$ valence state in the samples. The ferromagnetism in the samples can be interpreted in terms of the direct ferromagnetic coupling of ferric ions via an electron trapped in a bridging oxygen deficiency, which can be explained using the F-center exchange model.

• Bulletin of the Korean Chemical Society
• /
• 제21권7호
• /
• pp.679-684
• /
• 2000

The Sr2Co0.5Nb(Ta)0.5O4 and Sr3CoNb(Ta)O7 compounds, both with Ruddlesden-Popper structures, have been synthesized by the ceramic method at $1150^{\circ}C$ under atmospheric pressure. The crystallographic structure of the compounds was assigned to the tetr agonal system with space group 14/mmm by X-ray diffraction(XRD) Rietveld refinement. The reduced lattice volume and lattice parameters increased as the Ta with 5d substitutes for the Nb with 4d in the compounds. The Co/Nb(Ta)O bond length has been determined by X-ray absorption spectroscopic(EXAFS/XANES) analysis and the XRD refinement. The CoO6,octahedra were tetragonally distorted by elongation of Co-O bond along the c-axis. The magnetic measurement shows the compounds Sr2Co0.5Nb(Ta)0.5O4 and Sr3CoNb(Ta)O7 have paramagnetic properties and the Co ions with intermediate spin sates between high and low spins in D4h symmetry. All the compounds showed semiconducting behavior whose electrical conductivity increased with temperature up to 1000 K. The electrical conductiviy increased and the activation energy for the conduction decreased as the number of perovskite layers increased in the compounds with chemical formula An+1BnO3n+1.

• 보존과학회지
• /
• 제32권3호
• /
• pp.403-416
• /
• 2016

본 연구는 현재 단청시공에 실제 사용되고 있는 국산 천연안료 제품 총 22종을 대상으로 리트벨트법을 활용한 정량 X-선 회절분석을 실시하여 구성성분의 조성과 함량 특성을 밝히고자 하였다. 분석결과, 주보사와 황, 석록, 석청, 호분 등의 제품들은 각각 거의 순수한 진사, 웅황, 공작석, 남동석 및 방해석 또는 아라고나이트로 구성된 것으로 판단된다. 반면, 석간주와 황토, 뇌록, 라피스라즐리, 백토, 꼬막호분 등의 제품들은 각각 적철석, 침철석, 뇌록석, 라주라이트, 고령석 및 포틀랜드석 등이 주구성광물이며, 그 외 석영, 장석, 견운모, 질석 등 일반적인 토양에 풍부한 광물과 방해석, 석고 및 경석고 등과 같이 산업계에서 충진제로 활용되는 광물들이 각 제품에 다양한 비율로 함유되어 있는 것으로 나타났다. 이와 같이 정량 X-선 회절분석을 통하여 화학조성분석이나 현미경관찰만으로는 획득하기 쉽지 않은 보다 구체적인 안료 제품들의 광물조성 및 그 함량 비에 대한 정보를 획득할 수 있었으며, 추후 이를 천연안료제품의 품질기준 설정에 활용하거나 대체원료수급 및 품질향상을 통한 보존과학연구 등에 다양한 방법으로 적용이 가능할 것으로 사료된다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1171-1171
• /
• 2001

Quantitative analysis is an important requirement in exploration, mining and processing of minerals. There is an increasing need for the use of quantitative mineralogical data to assist with bore hole logging, deposit delineation, grade control, feed to processing plants and monitoring of solid process residues. Quantitative analysis using X-Ray Powder Diffraction (XRD) requires fine grinding and the addition of a reference material, or the application of Rietveld analysis to XRD patterns to provide accurate analysis of the suite of minerals present. Whilst accurate quantitative data can be obtained in this manner, the method is time consuming and limited to the laboratory. Mid infrared when combined with multivariant analysis has also been used for quantitative analysis. However, factors such as the absorption coefficients and refractive index of the minerals requires special sample preparation and dilution in a dispersive medium, such as KBr to minimize distortion of spectral features. In contrast, the lower intensity of the overtones and combinations of the fundamental vibrations in the near infrared allow direct measurement of virtually any solid without special sample preparation or dilution. Thus Near Infrared Spectroscopy (NIR) has found application for quantitative on-line/in line analysis and control in a range of processing applications which include, moisture control in clay and textile processing, fermentation processes, wheat analysis, gasoline analysis and chemicals and polymers. It is developing rapidly in the mineral exploration industry and has been underpinned by the development of portable NIR spectrometers and spectral libraries of a wide range of minerals. For example, iron ores have been identified and characterized in terms of the individual mineral components using field spectrometers. Data acquisition time of NIR field instruments is of the order of seconds and sample preparation is minimal. Consequently these types of spectrometers have great potential for in-line or on-line application in the minerals industry. To demonstrate the applicability of NIR field spectroscopy for quantitative analysis of minerals, a specific example on the quantification of lateritic bauxites will be presented. It has been shown that the application of Partial Least Squares regression analysis (PLS) to the NIR spectra can be used to quantify chemistry and mineralogy in a range of lateritic bauxites. Important, issues such as sampling, precision, repeatability, and replication which influence the results will be discussed.

• 한국광물학회지
• /
• 제24권3호
• /
• pp.195-204
• /
• 2011

용출구조를 보이는 티탄철석-적철석 광석시료에 대한 구조분석을 리트벨트법을 이용하여 시행하였다. 구조유사체인 두 광물의 분석결과, 기본구조인 팔면체의 형태는 티탄철석의 Ti를 중심으로 한 팔면체(M2)가 정팔면체에 가장 가까운 형태를 보여주며, 다음은 티탄철석의 Fe를 중심으로 한 팔면체(M1)이다. 적철석 팔면체의 경우 M1과 M2 중간정도이다. 고압실험은 두 광물의 회절선이 중첩되는 5.8 GPa까지 시행하였다. 이 압력구간에서 티탄철석은 정상적인 압축성을 보이나, 적철석의 압축은 미미하게 발생하는 비정상적인 거동을 보인다. 이러한 이상거동은 두 광물의 압축성 차이에 의한 차등대응에 의한 것으로 판단된다.

• 한국결정성장학회지
• /
• 제33권5호
• /
• pp.174-180
• /
• 2023

본 연구는 백자와 청자 소지에 철/코발트 황하물의 안료를 시유하여 1250℃에서 소성한 도자기 표면의 상형성을 연구하였다. 시편의 특성은 X-선 회절분석기, 전계방사형 주사전자현미경, 에너지 분산형 엑스선분석기 및 UV-vis 분광계를 이용하였다. X-선 리트벨트 정밀화 분석으로 백자소지는 석영과 뮬라이트가, 청자소지는 뮬라이트와 plagioclase가 주 결정상이다. 백자와 청자소지에 철/코발트 황하물의 안료를 시유한 경우 백자는 스피넬상이 청자는 andradite 상의 이차상이 형성되었다. 시편 소지의 색상은 밝기인 L^* 값은 백자와 청자소지가 72.01, 60.92이고 백자가 청자소지 보다는 백색도가 높다. 철/코발트 황하물의 안료를 도포한 시편에서 백자와 청자 시편의 경우, L^* 값은 44.89, 52.27, a^* 값은 2.12, 1.40, b^* 값은 1.4 5, 13.79를 각각 보이고 있다. L^* 값은 백자소지에 안료를 도포한 시편에서 큰 변화가 있으며, b^* 값은 소지에 따라 크게 차이가 나는 것을 알 수가 있다. 이는 표면층에 생성되는 Fe₂O₃ 상과 andradite 결정상 생성과 밀접한 관련이 있다.

• 한국세라믹학회지
• /
• 제49권1호
• /
• pp.111-117
• /
• 2012

Dependencies of thermal properties on the crystallization behavior of $0.9CaMgSi_2O_6-0.1MgSiO_3$ glass-ceramics were investigated as a function of heat-treatment temperature from $750^{\circ}C$ to $950^{\circ}C$. The crystallization behavior of the specimens depended on the heat-treatment temperature, which could be evaluated by differential thermal analysis (DTA), Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction (XRD) analysis by the Rietveld-reference intensity ratio (RIR) combined procedure. With an increase of the heat-treatment temperature, the thermal conductivity and thermal diffusivity of the heat-treated specimens increased. These results could be attributed to the increase of crystallization with heat-treatment temperature. However, the specific heat capacity of the heat-treated specimens was not affected by the heat-treatment temperature. The thermal conductivities measured from $25^{\circ}C$ to $100^{\circ}C$ were also discussed for application to lighting-emitting diode (LED) packages and substrate materials.

• Bulletin of the Korean Chemical Society
• /
• 제27권6호
• /
• pp.853-856
• /
• 2006

Dion-Jacobson phases $CsCa_2Nb_2FeO_9$ and $CsCa_2Nb_2AlO_9$ were reinvestigated by the Rietveld analysis of powder X-ray diffraction (XRD) method, scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS). These nominal compounds, previously known as the oxygen-deficient layered perovskites with the sequences of $NbO_6-MO_4-NbO_6$ in tripled slab, in fact, were mixed phases of n = 3 Dion-Jacobson phases and impurities such as $Ca_2NbFeO_6$ and $Ca_3Al_2O_6$. The difference of morphology and chemical in-homogeneity between Dion-Jacobson phases and impurities could be clearly identified by scanning electron microscopy with energy-dispersive X-ray spectroscopy. The chemical composition of $CsCa_2Nb_2FeO_9$ was calculated into $Cs_{0.59}Ca_{2.64}Nb_{2.92}Fe_{0.81}$ in small agglomerate crystals and $Cs_{0.95}Ca_{1.97}Nb_{3.08}Fe_{0.15}$ in long plate-like crystals.

• Geomechanics and Engineering
• /
• 제20권3호
• /
• pp.233-241
• /
• 2020

Alkali-silica reaction (ASR) is among one of the most important damaging mechanisms in concrete, depending primarily on aggregates which contain reactive minerals. However, expansion in concrete may not directly relate to the reactive minerals. This study aims to investigate the influence of ASR and the expansion of mortar bars depending on aggregate type containing various components such as quartz, clay minerals (montmorillonite and kaolinite) and micas (muscovite and biotite). In this study, the accelerated mortar bar tests (AMBT) were performed in two conditions (mortar bars in the same and sole NaOH solutions). Petrographic thin section studies, X-ray diffraction (XRD) analysis (Rietveld method), scanning electron microscopy (SEM) and chemical analyses were carried out. This study showed that quartzite bars led to increase in expansion values of mortar bars in diabase-1 and andesite when these were in the same NaOH solution. However, three samples (basalt, quartzite and claystone) were found having ASR expansion based on the AMBT when the special molds were used for each sample. SEM study revealed that samples which exhibit highest expansions according to AMBT had a generally rough surface and acicular microstructures in or around the micro-cracks. Basalt and quartzite showed more variable in major oxides than those of other samples based on the chemical analyses, SEM studies and AMBT. This study revealed that the highest expansions were observed to source not only from reactive aggregates but also from alteration products (silicification, chloritization, sericitization and argillisation), phyllosilicates (muscovite, biotite and vermiculite) and clays (montmorillonite and kaolinite).