• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.145-145
• /
• 1999

La-Ca-Mn-O (LCMO) 박막에서 초거대 자기 저항 효과와 발견된 이후 자기 센서와 고밀도 자기 저장 매체로서 응용하기 위한 연구가 진행되고 있다. 그러나 현재 대부분의 증착은 타겟과 박막간의 조성의 일치를 위하여 PLD 방법을 이용하고 있으며 RF magnetron sputtering 법으로 증착한 예는 많이 보고되고 있지 않으며 특히 적층 성장시킨 예는 아직 보고되지 있지 않다. 또한 LCMO와의 낮은 격자 상수 불일치를 보이는 SrTiO3와 LaAlO3 기판에 LCMO 박막을 성장시킬 경우 LaAlO3의 경우 XRD rocking curve의 curve의 FWHM 값이 SrTiO3 상에 증착시킨 것의 10배 이상의 값을 보인다는 것은 주목할 만한 사실이다. RF magnetron sputtering 법을 이용하여 LaAlO3 기판상에 145nm MCMO 박막을 적층성장시켰다. XRD $ heta$-2$\theta$ scan을 통해 박막이 c-축 배향한 것을 확인할 수 있었으며 RBS 분석결과 4.98%의 minimumyield를 보였으며 이로부터 박막이 적층성장한 것을 확인할 수 있었다. LCMO (200) peak의 XRD $\theta$-rocking 결과 FWHM의 값은 0.311$^{\circ}$를 보였으나 2개의 피크가 존재하는 것을 볼 수 있었다. 따라서 기판의 (200) 피크를 XRD $\theta$-2$\theta$ scan에서 0.3$^{\circ}$ 간격으로 두 개의 피크를 관찰할 수 있었는데 이는 기판과 박막간의 stress로 인한 tetragonal distortion에 의한 것으로 알려져 있었다. 따라서 기판상에 박막이 어떤 식으로 적층 성장되었는지를 RBS를 이용하여 <001>과 <011> 방향으로 2MeV He++를 주입하여 0.1$^{\circ}$ 간격으로 틸팅을 해본 결과 <001> 방향에서는 1.12$^{\circ}$의 차이를 보였다. 이는 기판과의 compressive stress로 인해 c축 방향으로 늘어났으며 stress relaxed layer는 XRD 결과와는 달리 관찰할 수 없었다. 이러한 현상의 기판 자체의 twin 구조로 인한 것으로 생각된다. RBS 분석후 고분해능 XRD를 이용해 LCMO (200) peak의 $\theta$-rocking 결과 이제R지 laAlO3 상 증착한 LCMO의 값으로는 제일 작은 0.147$^{\circ}$를 나타내었다.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.10
• /
• pp.5-12
• /
• 2011

Recently, NDS(Natural and Durable Stabilizer)method and other similar methods are composed of inorganic accelerating agent and the ultra-super fine cement have been studied as the ground improvement material in Korea. However, in the existing research, the chemical changing process of NDS in the strength development mechanism with the elapsed curing time and the principles of strength development did not give an explanation. For the popularization of the inorganic grout material, it determined that the mechanism verifying of the curing process had to be clearly preceded. Therefore, unconfined compression test, SEM and XRD analysis were performed by the elapsed curing time and were analyzed. In addition, the same trial for SGR method, that is the representative example of the water glass grout material, was selected as comparative target in order to distinguish properties of NDS more clearly. The result of experiment, the strength development mechanism of NDS could be investigated through the close correlation of the unconfined compression strength - SEM - XRD analysis, and excellence of a performance was confirmed.

• Fire Science and Engineering
• /
• v.29 no.6
• /
• pp.76-83
• /
• 2015

EPS sandwich panel contains flame retardants that slow down ignition during fires,reduce the amount of heat generated, and block the spread of combustion. However, if a sandwich panel does not satisfy standards for fire-retardant performance, it may increase damage to property and human life. It is difficult to test the fire-retardant performance of a finishing material with the naked eye, so it is necessary to develop convenient and fast evaluation methods that are convenient and fast. In this study, a fire safety evaluation method for EPS sandwich panel was analyzed using X-ray to detect specific components related to the fire-retardant performance X-ray fluorescence analysis (XRF) indicated that suitable panel products contained more aluminum in comparison to unsuitable products. Gibbsite was identified as the main crystalline material of flame retardant EPS through X-ray diffraction analysis (XRD) and was included in both suitable products and unsuitable products, but there was a difference in crystalline structure. This study was verifies the possibility of evaluating fire-retardant performance using ultimate analysis and crystal analysis through these X-ray methods.

• Journal of the Korean Vacuum Society
• /
• v.18 no.4
• /
• pp.245-253
• /
• 2009

For the growth optimization of InAs/GaSb (8/8-ML) strained-layer superlattice (SLS), the structure has been grown under various conditions and modes and characterized by the high-resolution x-ray diffraction (XRD) analysis. In this study, the strain modulation is induced by changing parameters and modes, such as the growth temperature, the ratio of V/III beam-equivalent-pressure (BEP), and the growth interruption (GI), and the strain variation is analyzed by measuring the angle separation of 0th-order satellite peak in XRD patterns. The XRD results reveal that the growth temperature and the V/III(Sb/Ga) ratio are major parameters to change the crystallineity and the strain modulation in SLS structures, respectively. We have observed that the SLS samples with compressive strain prepared in this study are show a transition to tensile strain with decreasing V/III(Sb/Ga) ratio, and the GI process is a sensitive factor giving rise to strain modulation. These results obtained in this study suggest that optimized growth temperature and V/III(Sb/Ga) ratio are $350^{\circ}C$ and 20, respectively, and the appropriate GI time is approximately 3 seconds just before InAs growth that the crystallineity is maximized and the strain relaxation is minimized.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.495-500
• /
• 2017

In this study, we synthesized the aminoclay (AC) with magnesium ions and 3-aminopropyl triethoxysilane (APTES). At the same time, propolis intercalated aminoclay (PIAC) and coptis extract intercalated aminoclay (CIAC) were synthesized by intercalating natural chemicals between clay sheets. Clay synthesis and natural chemical intercalation were confirmed through SEM, particle size analyze, FT-IR, TGA and XRD. In particular, the characterization of intercalation of natural chemicals was determined by analyzing the interlayer distance from XRD data. The antimicrobial property of PIAC and CIAC was checked by minimum inhibitory concentration (MIC) test and increased compared with that of the pristine aminoclay (AC).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.34 no.3
• /
• pp.98-102
• /
• 2024

In this study, the crystal characteristics of commercial AlN powders with sizes of "㎛" and "nm" were selected through XRD analysis and then sintered at different temperatures through an induction heating furnace to investigate the optimized sintering temperature and physical properties. The sintering temperature was 1,500, 1,700, and 1,900℃ in the N₂ atmosphere, and the optimized sintering temperature conditions were established for the sintered AlN pellets using SEM, XRD, and Raman analysis. Additionally, impedance analysis was performed to confirm the electrical properties of the optimized AlN pellet without sintering additives.

• Korean Journal of Materials Research
• /
• v.13 no.12
• /
• pp.825-830
• /
• 2003

Structural changes during oxidation of anisotopic mesophase carbon fiber(AMCFs) have been observed with TEM and XRD. It was shown that the AMCFs are three dimensionally stacked structure of turbostratic layers, and are non-homogeneous structure which consist of the highly ordered areas and the random areas. The $d_{ 002}$, Lc, and La of AMCFs which were measured by XRD were 3.44, 146, and $135\AA$, respectively. It was observed that the oxidation initiated at the random areas, because the $d_{002}$ / decreased to the value of 3.41 $\AA$ during initial oxidation stage. It was also observed that the La of the oxidized AMCFs increased up to 182 $\AA$ during the whole oxidation process, and the $d_{002}$ of that increases up to 9.44 $\AA$ when the burn-off is over the degree of 20%. Therefore, it was suggested that the micro-crystalline grew up by heat treatment effects during the fibers were oxidized, In addition, it was shown that there was difference in the measured value of La by XRD and TEM, in case of 39% oxidized fibers for example, the measured La was $ 165\AA$ by XRD and in the range of 180∼220 $\AA$ by TEM.

• Journal of the Korean Ceramic Society
• /
• v.40 no.5
• /
• pp.481-487
• /
• 2003

A technique for determination of proportions of char, coal ana coke is needed in order to monitor pulverized coal injection performance in operating blast furnace. Quantitative X-ray powder diffraction analysis can be applied to the problem providing that structural information on carbonaceous materials, coal, char, coke and their mixture are known. Chars were prepared from a coal at different temperatures (1000∼1400$^{\circ}C$) and were characterised by X-Ray powder Diffraction (XRD). The XRD result gave crystallite size (height Lc and diameter, La), aromaticity, number of (002) plane in carbon, and d-spacing. As a result, with increasing heat treat temperature of char, Lc$_{(002)}$, La$_{(10)}$ and number of (002) plane in carbon were increased, and d-spacing and FWHM(Full With Half Maximum) were decreased. Result of prediction of amount of char from the mixtures (char, coke and ore) based on the Lc$_{(002)}$ information of two mixtures (coke and char) showed very close values expected.

• Applied Chemistry for Engineering
• /
• v.18 no.1
• /
• pp.41-47
• /
• 2007

Crude copper phthalocyanine (Cupc) was synthesized by Wyler process, then grounded using various methods such as acid pasting, kneader, attritor and SC-mill. Particle size, shape and crystalline structure were compared and evaluated after particle size reductions. Cupcs prepared by acid pasting and kneader methods that are excellent manufacturing processes in industry were used as our standards. Particle properties of Cupcs prepared either by attritor or by SC-mill were compared with particle size analyzer, scanning electron microscopy (SEM) and X-ray diffraction (XRD). Particle size analyzer and SEM were used to analyze the variation of particle sizes of Cupc with milling time. Particle size was initially decreased up to the 90 min of milling time, thereafter it reversely began to increase in case of SC-mill. Cupc obtained from dry milling with attritor displayed strong cohesion so that particle size was not possible to determine with particle size analyzer. However, the optimum milling time was indirectly approximated from the analysis of XRD peak intensity.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.5
• /
• pp.225-229
• /
• 2015

This study was performed to investigate crystal structure of cubic spinel-type monophase oxide composed of the Mn-Co-Ni ternary system. Starting material was prepared by mixing Mn, Co, Ni oxides then evaporation to dryness. The XRD patterns were analyzed by in-situ XRD as increasing temperature from room temperature to $1400^{\circ}C$ in air atmosphere. The cubic spinel phase was existed in a temperature range from $900^{\circ}C$. However, separation of NiO phase was detected from $1300^{\circ}C$, which was the origin of deterioration in the crytallinity. The surface morphology of the manufactured NTC thermistors were analyzed by FE-SEM for comparison of good and bad samples.