• Korean Journal of Agricultural and Forest Meteorology
• /
• v.2 no.2
• /
• pp.41-46
• /
• 2000

This experiment was carried out to find out the responses of the growth characteristics to various air temperature in a high yielding indica/japonica rice cultivar, 'Dasanbyeo'. Five different transplanting dates with 30 day-old seedlings were tried to induce various environmental conditions, starting from 10th May to 19th June in the interval of 10 days at National Crop Experiment Station, in 1998. Planting densities with different plants per hill but same hill spacing were tested. The daily mean air temperature during 30 days after transplanting was 19.0, 20,8, 21.9, 24.4 and 25.2$^{\circ}C$ when transplanted on the 10th May, the 20th May, the 30th May, the 9th June and 19th June, respectively. The number of tillers per hill at 30 days after transplanting was affected by the daily mean air temperature during 30 days after transplanting. The higher the daily mean air temperature, the more tillers per hill at 30 days after transplanting were. The growth duration from transplanting to heading was greatly changed according to the transplanting dates. It was shortened as the transplanting date was delayed until transplanted on the 9th June, but it was prolonged when transplanted on the 19th June compared to that of the 9th June. The number of panicles per hill increased with the increase of the transplanted plants per hill up to 7 plants per hill. The number of panicle per unit area was closely related to the number of tillers per unit area at maximum tillering stage. It was found that the average effective temperature during first 10 tiller formation related to the days to the tenth tiller formation with the relationship of y = 1.071x$^2$ - 37.307x + 342.38($R^2$ = 0.9823).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.6
• /
• pp.377-385
• /
• 2018

For the investigation of dopant profiles in implanted $Si_{1-x}Ge_x$, the implanted B and As profiles are measured using SIMS (secondary ion mass spectrometry). The fundamental ion-solid interactions of implantation in $Si_{1-x}Ge_x$ are discussed and explained using SRIM, UT-marlowe, and T-dyn programs. The annealed simulation profiles are also analyzed and compared with experimental data. In comparison with the SIMS data, the boron simulation results show 8% deviations of $R_p$ and 1.8% deviations of ${\Delta}R_p$ owing to relatively small lattice strain and relaxation on the sample surface. In comparison with the SIMS data, the simulation results show 4.7% deviations of $R_p$ and 8.1% deviations of ${\Delta}R_p$ in the arsenic implanted $Si_{0.2}Ge_{0.8}$ layer and 8.5% deviations of $R_p$ and 38% deviations of ${\Delta}R_p$ in the $Si_{0.5}Ge_{0.5}$ layer. An analytical method for obtaining the dopant profile is proposed and also compared with experimental and simulation data herein. For the high-speed CMOSFET (complementary metal oxide semiconductor field effect transistor) and HBT (heterojunction bipolar transistor), the study of dopant profiles in the $Si_{1-x}Ge_x$ layer becomes more important for accurate device scaling and fabrication technologies.

• Journal of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.33-40
• /
• 2013

We investigate the dependence of the extended X-ray emission from the halos of optically luminous early-type galaxies on the small-scale (the nearest neighbor distance) and large-scale (the average density inside the 20 nearest galaxies) environments. We cross-match the 3rd Data Release of the Second XMMNewton Serendipitous Source Catalog (2XMMi-DR3) to a volume-limited sample of the Sloan Digital Sky Survey (SDSS) Data Release 7 with $M_r$ < -19.5 and 0.020 < z < 0.085, and find 20 early-type galaxies that have extended X-ray detections. The X-ray luminosity of the galaxies is found to have a tighter correlation with the optical and near infrared luminosities when the galaxy is situated in the low large-scale density region than in the high large-scale density region. Furthermore, the X-ray to optical (r-band) luminosity ratio, $L_X/L_r$, shows a clear correlation with the distance to the nearest neighbor and with large-scale density environment only where the galaxies in pair interact hydrodynamically with seperations of $r_p$ < $r_{vir}$. These findings indicate that the galaxies in the high local density region have other mechanisms that are responsible for their halo X-ray luminosities than the current presence of a close encounter, or alternatively, in the high local density region the cooling time of the heated gas halo is longer than the typical time between the subsequent encounters.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.4 no.2
• /
• pp.123-136
• /
• 1992

A preliminary thermodynamic design model of two-evaporator refrigerator/freezer system is constructed. This system is based on Lorentz-Meutzner cycle using refrigerant mixtures. This model screens alternative refrigerant (R32, R125, R143a, R22, R134a, R152a, R124, R142b, R123) mixtures to select the best performance-giving refrigerant mixtures and its composition for the system. Also, it estimates the effects of cooling temperatures of intercoolers, evaporator's area ratio, cooling load ratio on the performance of the system. The COP of the system ranges from 1.4 to 1.6, which is superior to that of the single evaporator system charged with R12 by 13% to 29%. Among 15 mixtures, R22/R123, R143a/R123, R32/R142b, and R32/R124 (in the order of high COP) are most recommendable. For the case of R22/R123, R22 mass fraction more than 0.5(Load Ratio=1.0) or 0.7(Load Ratio=0.33) is recomended in order to replace R12 without reduction in volumetric capacity when keeping the compressor as the same one. COP has the highest value with X(R22)=0.7 and 0.8, respectively. For the case of R143a/R123, in the similar manner, mass fraction of R143a is more than 0.5 or 0.6 while best performance occurs at X(R143a)=0.8. Higher temperature intercooler is more important for the performance of the system than lower temperature intercooler. The area ratio of evaporators is roughly proportional to load ratio of the evaporators.

• Journal of Korean Society of Forest Science
• /
• v.8 no.1
• /
• pp.140-148
• /
• 1968

Ginkgo biloba L., which was distributed in Korea, was x-rayed with 100, 250, 500, 1000, 2000, 6000R. The results of responses about germination, morphological variations in seedling and early stage growth may be summarized as follows : 1. The germination percent was decreased with X-ray increasing dose from 500R except the slight stimulation of 100R. 2. The germination $LD_{50}$ seemed to be 765R. 3. The seedling height was depressed significantly but only slightly in 100R. 4. The loaf index was increased proportionally to high dose but T/R ratio was reduced apparently. 5. The dry or fresh weight decreased from 250R. It was highly significant except 100R. 6. Many morphological variations were indicated in plants.

• Development and Reproduction
• /
• v.18 no.1
• /
• pp.33-41
• /
• 2014

We investigated the process of yolk absorption in Korean rose bitterling, Rhodeus uyekii, and determined the changes in its morphometric characteristics. The R. uyekii from 1 days post hatching (DPH) to 21 DPH, the eye diameter (ED) was 5.4 at 5 DPH. Thereafter, the ED/total length (TL) ratio increased to 10.7 at 21 DPH (p<0.05). The yolk length (YL) decreased from 95.4 to 1.1 by 21 DPH, and this rate of decrease was greater than that for any other dimension (p<0.05). 12 morphometric dimensions/TL for the R. uyekii were measured at each sampling day from 21 DPH to 170 DPH. At just hatching, the average TL and BW were $6.1{\pm}0.09mm$ and $4.9{\pm}0.07mg$, respectively. At 53 DPH, the average TL was $12.9{\pm}0.28mm$ and the average BW was $14.7{\pm}0.72mg$; the total length growth equation was $TL=5.507e^{0.038t}$ ($R^2=0.916$). Further, the body weight growth equation was $BW=3.3647e^{0.0296t}$ ($R^2=0.9354$). The dimensions with regard to body depth showed the greatest growth rates in the external characteristics of the fish (p<0.05). The patterns of the morphometric characteristics measured in this study can be classified in three ways. The patterns were shown to be increased (y=0.0992x+12.07, $R^2=0.8333$), decreased (y=-0.0569x+42.029, $R^2=0.8395$) or maintained (y=0.005x+18.263, $R^2=0.3678$) from 21 DPH to 170. These results will provide useful indices for the successful rearing of the R. uyekii.

• Korean Journal of Materials Research
• /
• v.11 no.5
• /
• pp.367-371
• /
• 2001

In this paper, theS $r_2$(T $a_{1-x}$ , N $b_{x}$)$_2$ $O_{7}$(STNO) films among ferroelectric materials having a low dielectric constant for metal-ferroelectric-semiconductor field effect transistor(MFS-FET) were discussed. The STNO thin films were deposited on p-type Si(100) at room temperature by co-sputtering with S $r_2$N $b_2$ $O_{7(SNO)}$ ceramic target and T $a_2$ $O_{5}$ ceramic target. The composition of STNO thin films was varied by adjusting the power ratios of SNO target and T $a_2$ $O_{5}$ target. The STNO films were annealed at 8$50^{\circ}C$, 90$0^{\circ}C$ and 9$50^{\circ}C$ temperature in oxygen ambient for 1 hour. The value of x has significantly influenced the structure and electrical properties of the STNO films. In the case of x= 0.4, the crystallinity of the STNO films annealed at 9$50^{\circ}C$ was observed well and the memory windows of the Pt/STNO/Si structure were 0.5-8.3 V at applied voltage of 3-9 V and leakage current density was 7.9$\times$10$_{08}$A/$\textrm{cm}^2$ at applied voltage of -5V.of -5V.V.V.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.613-618
• /
• 2008

Proto-type Korean High Speed Train(HSR 350x) had developed in 2002 through G7 High Speed Train R&D project from 1996, had carried successful trial running test up to 350km/h and has been executing running test more than 0.2 Mil. kilometers of accumulated running distance to insure reliability on service line till July 2008. Even though the R&D project has finished by Oct. 2007, the proto-type train HSR 350x has maintaining various measuring functions and test facilities till now. So it may be needed a suggestion on the direction of practical use in public purpose of the HSR 350x. This study has suggested several directions of practical use in public purpose of the HSR 350x, and feasibilities for each alternatives of practical use in order to contribute making reasonable decision for practical use of the train in public purpose for the future.

• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.2
• /
• pp.25-36
• /
• 2007

We researched the change of astigmatism power when the fixation point moved from far distance to near distance. Astigmatism power was measured by using both eyes open-view auto-refractometer. We divided the ages between 5 and 67 years old into 12 groups with 1,598 healthy eyes(male-698 eyes and female-900 eyes) without eyes problems and experiences of eyes operations. The mean power in far astigmatism showed that with-the-rule of the total astigmatism: -0.79D, with-the-rule of the corneal astigmatism: -1.07D and against-the-rule of the residual astigmatism : -0.79D were found most respectively. The correlation between cornea astigmatism and total astigmatism was y=0.7493 x + 0.5661 r=0.6510, residual astigmatism and total astigmatism was y=0.248 x - 0.5926 r=0.2598 and corneal astigmatism and residual astigmatism was y=-0.4439 x - 0.1813 r=-0.5551 in the far distance. The mean power in near astigmatism showed that with-the-rule of total astigmatism : -0.92D, with-the-rule of corneal astigmatism : -1.12D, against-the-rule of residual astigmatism : -0.87D were found most respectively. In the near distance, The correlation between corneal astigmatism and total astigmatism was y=0.6872 x + 0.5934 r=0.6204, residual astigmatism and total astigmatism was y=0.303 x - 0.6066 r=0.3165, corneal astigmatism and residual astigmatism was y=-0.46 x - 0.0626 r=-0.5322. When the fixation point moved far distance to near distance, the differences of power according to the type of astigmatism were total astigmatism: $-0.07D{\pm}0.44D$, corneal astigmatism: $-0.04D{\pm}0.54D$ residual astigmatism:$0.01D{\pm}0.53D$. Most of astigmatism refractive power was increased except for oblique-the -astigmatism. When the fixation point moved far distance to near distance, the change of astigmatism refractive power showed total astigmatism: 540 eyes(33.7%), corneal astigmatism: 638 eyes(39.9%), residual: 841 eyes(52.6%).

• Progress in Medical Physics
• /
• v.16 no.2
• /
• pp.53-61
• /
• 2005

The quality factors for cylindrical ionization chambers for kV X-rays were determined by Monte Carlo calculation and measurement. In this study, the X-rays of 60-300 kV beam (lSO-4037) installed in KFDA and specified in energy spectra and beam qualities, and the chambers of PTW N23333 and N30001 were investigated. In calculations, the $R_{\mu}\;and\;R_{Q,Q_{0}}$ in IAEA dosimetry protocols were determined from the air kerma and the cavity dose obtained by theoretical and Monte Carlo calculations. It is shown that the N30001 chamber has a flat response of $\pm1.7\%$ in $110\~300kV$ region, while the response range of two chambers were shown to $\pm3\~4\%$ in $80\~250kV$ region. From this work we have discussed dosimetry protocol for the kV X-rays and we have found that the estimation of energy dependency is more important to apply dosimetry protocol for kV X-rays.