• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.2
• /
• pp.178-182
• /
• 2005

The proposed system in this paper is designed to provide users with a means of global location information using Orbcomm satellite communication and X.400 protocol. The system's two-way data transmission capabilities allow users to track mobile or fixed objects anywhere in the world via Internet. This study utilizes the X.400 protocol, and the SIP(Serial Interface Protocol) and self defined control protocol to implement data communication link in this paper. Data processor board connected to SC(Subscriber Communicator) is also designed and implemented to interface with GPS receiver. The experimental results of the proposed global position location system is evaluated through real-time experiments, and we have confirmed it works well according to the protocol designed in this paper.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2594-2599
• /
• 2011

In Korea, the HEMU-400X(High-speed Electric Multiple Unit-400km/h eXpress) has been developed since 2007 and will be operated over 400km/h in 2013. It is necessary to prepare test-bed section in Honam high-speed railroad to take the maxim running speed test for the HEMU-400X developed. In order to determine proper test-bed sections for the maximum speed of 400km/h, TPS(Train Performance Simulation) program with the data of train model, running resistance, traction power and braking capacity was used to analyze the train performances such as locations, speeds and power consumptions by times. In this study, the specifications of the HEMU-400X project and the route conditions of the Honam high-speed railroad under construction were utilized for the TPS program to determine the optimal test-bed sections for the maximum speed of 400km/h.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.201-206
• /
• 2009

In the testing stage of HEMU-400X(next Korean high speed train) developing project, maximum speed(400km/h) tests will be conducted. On present and near future conditions of the overhead contact lines, 400km/h is over the design speed criteria. The predictions of current collection performance including the percentage loss of contact(arcs level) parameter through dynamic interaction simulation of HEMU-400X maximum speed test run are described in this paper. Various simulations are conducted at the condition of two different contact wire tensions to draw the proper contact wire increasing values in the 400km/h test line under the available contact wire tension supporting condition of that line.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1-6
• /
• 2011

In Korea, high-speed train(HEMU-400X) system with distributed power is being developed, and the highest test speed of this train is 400km/h. This developed the first high-speed train as a distributed power train in Korea, as well as for the development of train system and evaluation system included evaluation technology is needed. Accordingly, a comprehensive and efficient OMS(Overall Measurement System) was build up for verifying the performance of HEMU-400X. By the case study of the G7 and TTX, OMS of HEMU-400X was improved the test performance and maintainability. In particular, the existing Window-based systems has a limit to the control, due to this reason OMS applying enhanced RT(Real-time) system. In this study, compare the advantages and disadvantages of RT systems with Window-based systems, as well as the configuration of the RT systems.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.88-93
• /
• 2011

The aerodynamic drag characteristics of HEMU-400X which has been being developed for the maximum speed of 430km/h were analyzed experimentally as the variations of the pantograph cover configurations to reduce the acoustic noise and the aerodynamic drag of the pantograph system. The wind tunnel tests were performed with three pantograph cover models upon 1/20 scaled 5-car model of HEMU-400X. Two kinds of wedge shapes which induce up-flow in the vicinity of the pantograph and one cone shape which reduces the whole train drag were used in order to compare the aerodynamic characteristics as the pantograph cover shape changes. The each axial force of 5 each car was measured at a time with the test velocities, 30, 40, 50, 60m/s. Through the wind tunnel test the base drag forces of HEMU-400x model and the forces by the pantograph cover on the train model were investigated and the aerodynamic drag characteristics of the train model by the pantograph cover configurations were analyzed.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.58-63
• /
• 2010

HEMU-400X train have been developed and will be operated over 350km/h. In this paper, the influence of vertical alignment on running behavior and safety for HEMU-400X train was instigated by numerical analysis. The wavelength and amplitude of vertical alignment were considered in scenario of this numerical analysis. This research is based on just numerical analysis and the final result which include measurement will be published in the future.

• 대한핵의학회:학술대회논문집
• /
• 2004.11a
• /
• pp.400.2-400.2
• /
• 2004

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.5
• /
• pp.621-627
• /
• 2011

In this paper, we analysed performance for on-wafer GaN HEMT using load-pull in X-band, and studied optimum impedance point based on analysis result. We suggested method of optimum performance device by analysis of optimum impedance for solid state device on-wafer condition before packaging. The measured device is gate length 0.25um, and gate width is 400um, 800um. device 400um is performed $P_{sat}$=33.16dBm, PAE=67.36%, Gain=15.16dBm, and device 800um is performed $P_{sat}$=35.91dBm, PAE=69.23%, Gain=14.87dBm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.140-142
• /
• 2011

In this paper, special purpose arithmetic unit for mobile graphics accelerator is designed. The designed processor supports six operations, such as $1/{\chi}$, $\frac{1}{{\sqrt{x}}$, $log_2x$, $2^x$, $sin(x)$, $cos(x)$. The processor adopts 2nd-order polynomial minimax approximation scheme based on IEEE floating point data format to satisfy accuracy conditions and has 5-stage pipeline structure to meet high operational rates. The SFAU processor consists of 23,000 gates and its estimated operating frequency is about 400 Mhz at operating condition of 65nm CMOS technology. Because the processor can execute all operations with 5-stage pipeline scheme, it has about 400 MOPS(million operations per second) execution rate. Thus, it can be applicable to the 3D mobile graphics processors.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.6
• /
• pp.581-587
• /
• 2012

Thermal aging effect on NSR kinetics was studied over Pt/Co/Fe/Ba/$Al_2O_3$ catalyst. The amount of $NO_x$ uptake over Pt/Co/Fe/Ba/$Al_2O_3$ calcined at $400^{\circ}C$ increased with increasing NSR temperature from $200^{\circ}C$ to $400^{\circ}C$, where amount of $NO_x$ uptake is the highest at $400^{\circ}C$ with mol ratio of $NO_x$/Ba = 0.5. Thereafter, the amount of $NO_x$ uptake at $400^{\circ}C$ decreased with the higher calcination temperature, where Pt/Co/Fe/Ba/$Al_2O_3$ catalyst calcined at $700^{\circ}C$ showed an amount of $NO_x$ uptake with the mol ratio of $NO_x$/Ba=0.062. Result of XRD and NSR showed that Fe addition into Pt/Co/Fe/Ba/$Al_2O_3$ suppressed sintering of Pt crystallites and make $NO_x$ uptake larger, compared to no addition of Fe into Pt/Co/Fe/Ba/$Al_2O_3$ catalyst. From BET result, it was found that the change of specific surface area was relatively small by the thermal aging process. Therefore, it was found that the sintering of Pt crystallites caused the decrease of $NO_x$ uptake during NSR reaction and Fe played a role to suppress the sintering process of Pt crystallites caused by thermal aging.