• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.133-134
• /
• 2000

Effect of nitrogen doping on field emission characteristics of patterned Diamond-like Carbon (DLC) films was studied. The patterned DLC films were fabricated by the method reported previously[1]. Nitrogen doping in DLC film was carried out by introducing $N_2$ gas into the vacuum chamber during deposition. Higher emission current density of $0.3{\sim}0.4$ $mA/cm^2$ was observed for the films with 6 at % N than the undoped films but the emission current density decreased with further increase of N contents. Some changes in CN bonding characteristics with increasing N contents were observed. The CN bonding characteristics which seem to affect the electron emission properties of these films were studied by Raman spectroscopy, x-ray photoemission spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR). The electrical resistivity and the optical band gap measurements showed consistence with the above analyses.

• Journal of IKEEE
• /
• v.21 no.3
• /
• pp.297-308
• /
• 2017

By using electron beam evaporation under appropriate conditions, we obtained graphene intercalated sheets on Si(111) with an average crystallite size less than 11nm. The formation of such nanocrystalline graphene was found as a time-dependent function of carbon deposition at a substrate temperature of $1000^{\circ}C$. The structural and electronic properties as well as the surface morphology of such produced materials have been confirmed by reflection high energy electron diffraction, Auger electron spectroscopy, X-ray photoemission spectroscopy, Raman spectroscopy, scanning electron microscopy, atomic force microscopy and scanning tunneling microscopy.

• Current Applied Physics
• /
• v.18 no.11
• /
• pp.1190-1195
• /
• 2018

By employing soft X-ray magnetic circular dichroism (XMCD), soft X-ray absorption spectroscopy (XAS), and photoemission spectroscopy (PES), we have investigated the electronic structure of the candidate zero-moment half-metallic $Mn_3Ga$. We have studied the ball-milled and annealed $Mn_3Ga$ powder samples that exhibit nearly zero magnetization. Mn 2p XAS revealed that Mn ions in $Mn_3Ga$ are nearly divalent for both of the Mn ions having the locally octahedral symmetry and those having the locally tetrahedral symmetry. The measured Mn 2p XMCD spectrum of $Mn_3Ga$ is very similar to that of ferrimagnetic $MnFe_2O_4$ having divalent Mn ions. The sum-rule analysis of the Mn 2p XMCD spectrum shows that both the spin and orbital magnetic moments of Mn ions in $Mn_3Ga$ are negligibly small, in agreement with the nearly compensated-ferrimagnetic ground state of $Mn_3Ga$. The valence-band PES spectrum of $Mn_3Ga$ agrees well with the calculated density of states, supporting the half-metallic electronic structure of $Mn_3Ga$.

• Korean Journal of Materials Research
• /
• v.4 no.6
• /
• pp.620-625
• /
• 1994

We recently showed from the neutron diffraction and extended X-ray absorption fine structure studies the structural evidence for the formation of an amorphous phase in immiscible Cu-Ta system subjected to mechanical alloying. In a system with a positive heat of mixing like Cu-Ta, we consider it necessary to confirm the formation of an amorphous phase not only from the structural studies but also from a change in the electronic properties. We show the electronic evidence for the formation of the chemical bonding between the unlike atoms Cu and Ta for the 120 h-milling sample through changes in superconducting transition temperature and X-ray photoemission spectroscopy valence band structure.

• Journal of the Korean Vacuum Society
• /
• v.5 no.2
• /
• pp.107-112
• /
• 1996

Thin films of $Pb(Zr_xTi_{1-x})O_3$)PZT) were grown on $Pt/SiO_2/Si(100)$ at various temperatures by RF magnetron sputtering method. Surface morphology of these films were studied by using Atomic Force Microscopy(AFM). These films were also analyzed by using Atomic Force Microscopy(AFM). These films were also analyzed by using X-ray photoemission spectroscopy(XPS) for determining their chemical composition and their depth profile. It was found that the films grown at the substrated temperature of $300^{\circ}C$ have much more smooth surface characteristics in comparison to those films grown at room temperature, which may be explained in terms of surface mobility of ad-atoms such as Pb. It was also found that Pb enrichment in the near surface region enhanced for the films grown at higher substate temperature.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.567-567
• /
• 2012

Since the carbon nanotubes (CNTs) have extraordinary material properties, many researchers are trying to make a practical application in various fields [1]. In particular, the high surface area of CNTs was fascinated for nano-template on the catalytic system. $RuO_2$ coated CNTs are useful functional nano-composites in many applications, including super capacitors, fuel cells, biosensors, and field emitters. However, the research of interaction between CNTs and $RuO_2$ was not satisfied with various fields [2]. In this study, we will introduce the change of chemical and electrical state of $RuO_2$/CNTs at different temperatures by synchrotron radiation photoemission spectroscopy (SRPES). The t-MWCNTs used in this experiment were grown on the Ni/TiN/Si substrates by chemical vapor deposition. $RuO_2$ of 4-20 nm in thickness was deposited on the t-MWNTs by sputter. The SRPES measurements were carried out at the 4B1 beamline of the Pohang Accelerator Laboratory in Korea. The result of XPS measurement indicates that the deposited $RuO_2$ on the CNTs was reduced into pure Ru at above $300^{\circ}C$. And we confirmed that the effective work function of $RuO_2$/CNTs was decreased with increasing temperature.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.28.1-28.1
• /
• 2011

We deposited the carbon films on Ni substrates by thermal atomic layer deposition (th-ALD), for the first time, using carbon tetrabromide ($CBr_4$) precursors and H2 reactants at two different temperatures (573 K and 673 K). Morphology of carbon films was characterized by scanning electron microscopy (SEM). The carbon films having amorphous carbon structures were analyzed by X-ray photoemission spectroscopy (XPS) and Raman spectroscopy. As the working temperature was increased from 573 K to 673 K, the intensity of C1s spectra was increased while that of O1s core spectra was reduced. That is, the purity of carbon films containing bromine (Br) atoms was increased. Also, the thin amorphous carbon films (ALD 3 cycle) were transformed to multilayer graphene segregated on Ni layer, through the post-annealing and cooling process.

• Journal of the Korean Vacuum Society
• /
• v.19 no.1
• /
• pp.14-21
• /
• 2010

Ge is one of the attractive channel materials for the next generation high speed metal oxide semiconductor field effect transistors (MOSFETs) due to its higher carrier mobility than Si. But the absence of a chemically stable thermal oxide has been the main obstacle hindering the use of Ge channels in MOS devices. Especially, the fabrication of gate oxide on Ge with high quality interface is essential requirement. In this study, $HfO_xN_y$ thin films were prepared by plasma-enhanced atomic layer deposition on Ge substrate. The nitrogen was incorporated in situ during PE-ALD by using the mixture of nitrogen and oxygen plasma as a reactant. The effects of nitrogen to oxygen gas ratio were studied focusing on the improvements on the electrical and interface properties. When the nitrogen to oxygen gas flow ratio was 1, we obtained good quality with 10% EOT reduction. Additional analysis techniques including X-ray photoemission spectroscopy and high resolution transmission electron microscopy were used for chemical and microstructural analysis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.119-119
• /
• 2015

Ion beam sputtering has been widely used in Secondary Ion Mass Spectrometry (SIMS), X-ray Photoelectron Spectroscopy (XPS), and Auger Electron Spectroscopy (AES) for depth profile or surface cleaning. However, mainly due to severe matrix effects such as surface composition change from its original composition and damage of the surface generated by ion beam bombardment, conventional sputtering skills using mono-atomic primary ions with energy ranging from a few hundred to a thousand volts are not sufficient for the practical surface analysis of next-generation organic/inorganic device materials characterization. Therefore, minimization of the surface matrix effects caused by the ion beam sputtering is one of the key factors in surface analysis. In this work, the electronic structure of a $Ta_2O_5$ thin film on $SiO_2/Si$ (100) after Ar Gas Cluster Ion Beam (GCIB) sputtering was investigated using X-ray photoemission spectroscopy and compared with those obtained via mono-atomic Ar ion beam sputtering. The Ar ion sputtering had a great deal of influence on the electronic structure of the oxide thin film. Ar GCIB sputtering without sample rotation also affected the electronic structure of the oxide thin film. However, Ar GCIB sputtering during sample rotation did not exhibit any significant transition of the electronic structure of the $Ta_2O_5$ thin films. Our results showed that Ar GCIB can be useful for potential applications of oxide materials with sample rotation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.334.2-334.2
• /
• 2014

본 연구에서는 a-InGaZnO (IGZO) 활성층에 대기분위기에서 열처리 온도를 각각 $150^{\circ}C$, $250^{\circ}C$, $350^{\circ}C$ 실시하여 전자구조와 광학적 특성분석 및 화학적 결합 상태의 변화를 알아보고, 이러한 물성 변화에 따른 소자의 특성을 알아 보았다. 박막 트랜지스터 소자의 전기적 특성은, IGZO 박막에 후 열처리 공정온도 후 제작한 박막 트랜지스터는 $150^{\circ}C$에서 3.1 cm2/Vs의 전계 효과 이동도와 0.38 V/decade의 문턱전압 이하 기울기를 보였으나, $350^{\circ}C$에서는 8.8 cm2/Vs의 전계 효과 이동도와 0.20 V/decade의 문턱전압 이하 기울기로 더 향상된 박막 트랜지스터의 전기적 특성 결과를 관측하였다. 전기적 소자 특성의 변화와 활성층 IGZO 박막 특성 변화와의 상관관계를 조사하기 위하여 X-ray Absorption Spectroscopy (XAS)과 Spectroscopy Ellipsometry (SE)로 측정된 흡수 스펙트럼을 통하여 3 eV 이상의 광학적 밴드 갭은 기존에 보고 되었던 a-IGZO와 유사한 특성을 보이고 있음을 확인하였고, 이러한 측정, 분석법들을 통해 후 열처리 공정 온도에 따른 밴드 갭 부근의 결함준위의 양 변화와 가전자대의 전자구조의 변화에 따라 전기적 특성이 달라짐을 확인 할 수 있었다. 또한, X-ray Photoemission Spectroscopy (XPS)를 통해 측정한 O-1s를 통해 Oxygen deficient state와 밴드 갭 부근의 결함준위와의 상관관계를 도출해낼 수 있었다. 이는 a-IGZO 활성층에 후 열처리 공정 온도 변화에 따라서 전자구조의 혼성변화와 밴드 갭 부근의 결함준위의 양의 변화, 에너지 준위의 변화 및 이와 연관된 화학적 상태 변화가 박막 트랜지스터의 특성 변화를 예상할 수 있다는 결과를 도출하였다.