• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.32-34
• /
• 2007

The X-ray projection system has long been used for steel-tube inspection and weld monitoring. The thickness of tubes and welded areas is based on the evaluation of radiographic shadow projections. The traditional tangential measurement estimates the distance of border lines of the projected wall shadows of a tube onto a radiographic image detector. The detected image in which although there is a variety of noise may be sectioned into several partitions according to its specific blocks. Imaging noise originates from most of elements of the system, such as shielding CCD camera, imaging screen, X-ray source, inspected object, electronic circuits and etc. The tangential projection incorrectness and noise influence on imaging quality. In this paper we first sectionalize the X-ray image on the basis of vertical contrast difference. And next functional and statistic analysis are carried on at each region. Geometrical distance and unsharpness of the edge caused by visual evaluation uncertainties are also discussed.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권5호
• /
• pp.493-504
• /
• 2018

The diagnostic radiation equipment is managed in accordance with the "Rules for Safety Management of Diagnostic Radiation Equipment" enacted in 1995. The equipments should be inspected before use and every three years after use in accordance with the [Appendix 1] of the same rule. The inspection standard has been maintained without particular revision since enacted. But, over the past two decades new types of equipments have been manufactured and used. So, it is necessary to revise [Appendix 1] by making inspection items and inspection standards. In this study, we revised the classification system of equipments and reviewed international standards of IEC 60601 series, IEC 61223 series and AAPM TG 18 On-line Report No.03. And identified the problem of current inspection standards. Through this, we revised, deleted and added the inspection items and inspection standard of each equipment to meet the domestic circumstances. As a result of the study, we reorganized the classification system of equipment which are current classified as 5 classes into 22 classes as X-ray system etc. (7 classes), CT system etc. (5 classes) and Dental X-ray system etc. (10 classes). And then, we developed 70 inspection items for 6 types of equipments according to the reorganized classification system of equipments. The inspection items and inspection standards derived from this study have been proposed to the KCDC and will be applied to the revision of the Rule's [Appendix 1]. Therefore, we expect to be used as reference materials for domestic medical center, inspection institutions, and equipment manufacturing import companies.

• 한국융합학회논문지
• /
• 제8권3호
• /
• pp.191-197
• /
• 2017

본 개발은 중간 크기 미만의 외형 결함을 검출함에 있어 X-Ray 광원을 사용하는 비파괴 장비이다. 본 연구개발물의 차별성은 X-Ray광원을 이용 중소형 생산제품들의 외부결함 유무를 실시간 검사할 수 있으며 표면 방사선 누설선량에 있으면서 검사 속도제어가 가능하다. 이를 소프트웨어로 해결하였다. 또한 작업 중 작업자 안전을 위해 도어 차단이 가능하고 동시에 장비 내부 구동 영상의 획인이 가능하다는 점이다. 이런 원리로 현재는 중소형 부품에서부터 크게는 컨테이너와 같은 검사시스템의 기반 기술로 활용이 가능하다. 본 연구는 자동차 산업 외에 다른 다양한 비파괴 시장 산업에 큰 영향을 미칠 것이다. 마지막으로 개발된 비파괴 장비는 $0.2Sv{\mu}$ 하에서 제어된다는 사실은 아주 중요한 사실이다.

• 제어로봇시스템학회논문지
• /
• 제19권10호
• /
• pp.886-890
• /
• 2013

In this paper, a 3D coordinates acquisition method for a mechanical assembly is developed by using multiview X-ray images. The multi-view X-ray images of an object are obtained by a rotary table. From the rotation transformation, it is possible to obtain the 3D coordinates of corresponding edge points on multi-view X-ray images by triangulation. The edge detection algorithm in this paper is based on the attenuation characteristic of the X-ray. The 3D coordinates of the object points are represented on a graphic display, which is used for the inspection of a mechanical assembly.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.63.3-63
• /
• 2001

Inspection and shape measurement of three-dimensional objects are widely needed in industries for quality monitoring and control. In this paper, we propose a three dimensional volume reconstruction method, which is an iterative method and as uniform and simulated algebraic reconstruction technique (USART). In this method, two or more x-ray images projected from different views are needed, and also the geometry of the imaging system need to be a priori identified well. That is to say, the relative locations between the x-ray source, imaging plane and the object should be determined exactly by calibration. To achieve this, we propose a series of coordinate calibration methods of the x-ray imaging system using grid pattern images. Some experimental results of these calibrations is presented and discussed in detail ...

• 한국산업정보학회논문지
• /
• 제23권1호
• /
• pp.1-12
• /
• 2018

본 논문은 듀얼 에너지 X-ray 검색기의 영상을 이용한 물질의 추정 방법 알고리즘을 제안한다. 물질 추정 알고리즘으로 많이 사용되는 기존 4가지 분별 곡선 이외에 로그 함수를 사용한 새로운 분별곡선을 이용하여 물질을 분류한다. 여기에 기존의 선형 보간을 이용한 원자번호 추정 방법이 아닌 확률분포를 이용한 원자번호 추정 방법을 제시한다. 확률분포를 이용한 가중치 계산에는 근접한 두 기준물질을 사용하는 방법과 모든 기준물질을 사용하는 방식, 2가지 방식을 실험하였다. 확률분포를 가중치로 사용하여 물질의 원자번호를 추정 할 경우 기존의 방법보다 더 정확한 원자번호 추정 결과를 나타내었다. 추정된 원자번호를 육안으로 확인하기 위하여 HSI 모델을 이용하여 결과영상에 채색하였다.

• 전기학회논문지
• /
• 제62권8호
• /
• pp.1151-1156
• /
• 2013

In this study, to clearly establish the concept of a geometric modeling I apply for the concept of Pushbroom, limited to two-dimensional radiation Locator to provide a three-dimensional information purposes. Respect to the radiation scanner Pushbroom modeling techniques, geometric modeling method was presented introduced to extract three-dimensional information as long as the rotational component of the Gamma-Ray Linear Pushbroom Stereo System, introduced the two-dimensional and three-dimensional spatial information in the matching relation that can be induced. In addition, the pseudo-inverse matrix by using the conventional least-squares method, GCP(Ground Control Point) to demonstrate compliance by calculating the key parameters. Projection transformation matrix is calculated for obtaining three-dimensional information from two-dimensional information can be used as the primary relationship, and through the application of a radiation image matching technology will make it possible to extract three-dimensional information from two-dimensional X-ray imaging.

• 통상정보연구
• /
• 제6권3호
• /
• pp.183-201
• /
• 2004

Recently, Electronic commerce market is growing sharply for the expansion of internet and development of means of air transportation. Import Clearance System for express consignments, introduced in Korea, confers some benefit upon express consignments, ie. prompt clearance, simplification of the clearance procedure, exemption of necessary documents. But it has some problems such as lack of social security and trade compliance. So it requires some improvements as follows. Firstly, it has no legal background to clear all articles valued at US$100 or less carried by an express consignment operator. So customs brokers, not express consignment operators, should clear that articles. Secondly, it should be presented necessary documents including commercial invoice to prevent a wrong price declaration in entering express consignments valued at US$100 or less. Thirdly, X-ray inspectors must enhance their inspection ability. Customs must provide education programs for X-ray inspectors to improve their inspection ability. Lastly, Cargo selectivity system for express consignments have to be improved to operate effectively.

• 한국정보통신학회논문지
• /
• 제24권12호
• /
• pp.1704-1710
• /
• 2020

컨테이너 검색을 위해 사용되는 고에너지 X-선 영상획득용 검출기는 입사되는 고에너지 X-선을 효과적으로 획득하기 위하여 MeV X-선 수집이 충분히 수행될 수 있는 두께의 섬광체를 사용한다. 컨테이너 검색기에서는 섬광체에 입사되는 X-선의 에너지는 일반적으로 최대 9MeV의 X-선이 사용된다. 그러므로 고에너지 X-선 광자를 효과적으로 수집하기 위해서는 수 cm 두께의 섬광체가 이용되어야 하며 섬광체의 두께는 신호의 수집효율에 영향을 미치게 된다. 본 연구에서는 컨테이너 검색에 사용되는 CdWO4 섬광체와 소면적의 센서를 활용한 영상검출기의 설계조건에 대한 연구를 기술하고 있다. 이를 위하여 본연구에서는 섬광체의 적절한 두께와 섬광체 표면의 반사율에 따른 빛 수집효율을 계산하기 위하여 MCNP6와 DETECT2000을 활용하여 다양한 조건에서 X-선 거동과 빛의 거동에 대한 모사를 수행하였다. 빛 수집효율 계산결과 섬광체 표면의 반사율이 낮은 경우 대략 15 ~ 20mm 두께의 섬광체를 선정하는 것이 적합하였으나 반사율이 높아짐에 따라 대략 25 ~ 30mm 두께의 CdWO4 섬광체를 선정하는 것이 적합한 것으로 확인되었다.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1626-1633
• /
• 2021

In an industrial field, non-destructive testing (NDT) is commonly used to inspect industrial products. Among NDT methods using radiation sources, X-ray laminography has several advantages, such as high depth resolution and low computational costs. Moreover, an X-ray laminography system with stationary source array and compact detector is able to reduce mechanical motion artifacts and improve inspection efficiency. However, this system, called stationary inverse-geometry X-ray laminography (s-IGXL), causes truncation artifacts in reconstructed images due to limited fields-of-view (FOVs). In this study, we proposed a projection data correction (PDC) method to reduce the truncation artifacts arisen in s-IGXL images, and the performance of the proposed method was evaluated with the different number of focal spots in terms of quantitative accuracy. Comparing with conventional techniques, the PDC method showed superior performance in reducing truncation artifacts and improved the quantitative accuracy of s-IGXL images for all the number of focal spots. In conclusion, the PDC method can improve the accuracy of s-IGXL images and allow precise NDT measurements.