• 대한가정학회지
• /
• 제23권1호
• /
• pp.33-47
• /
• 1985

The rheological properties of acorn starch gel were investigated in region of small and large deformation. The properties were compared with those of potato and wheat starch gel. On the physical characteristics and the effect of tannin contents of acorn starch were examined. RESULTS : 1. X-ray diffractogram of acorn starch showed C-type and its granules swelled gradully with heating. 2. Hardness, brittleness and both small and large deformation of the acorn starch gel were remarkably large, also the concentration dependence of the acorn starch gel could be recognized in small deformation and hardness. 3. The Young's modulus of Hookean body in small deformation and the rupture stress in large deformation differed obviously from the parameters of rheological properties in various gels. 4. It was found that the selling power, viscosity and rhelogical properties were affected obviously by the tannin.

• Journal of the Korean Wood Science and Technology
• /
• 제33권6호통권134호
• /
• pp.63-70
• /
• 2005

$225^{\circ}C$에서 $325^{\circ}C$ 이하의 저온에서 열처리한 셀룰로오스의 물성과 에틸아민 흡착특성을 열처리온도별로 조사하였다. 열처리온도의 증가와 더불어 수율이 감소하고, 탄소함량이 증가하는 반면, 수소나 산소의 함량은 감소하였다. 표면관능기량을 Boehm 법으로 측정한 결과, 열처리온도가 $300^{\circ}C$까지 올라가면 산성관능기량이 증가하였으나 그 이상의 온도에서는 다소 감소하는 경향이 있었다. 염기성관능기는 거의 존재하지 않았으며 열처리온도 $325^{\circ}C$에서 미량 확인할 수 있을 정도였다. 열처리셀룰로오스를 1점법으로 측정한 비표면적은 처리온도가 높으면 다소 증가하는 경향이 있었으나 매우 적었다. 열처리 온도가 증가할수록 셀룰로오스의 에틸아민증기 흡착량이 증가하여 $300^{\circ}C$ 처리 셀룰로오스의 에틸아민흡착에 의한 중량증가가 최대 113%를 나타내었다. $275^{\circ}C$에서 열처리셀룰로오스는 에틸아민 흡착 시, 팽윤이 일어나고 용해현상이 일어났다. $275^{\circ}C$ 이상의 온도에서 열처리한 셀룰로오스는 X선회절도 상에서 무정형화 하는 것으로 나타났다. 에틸아민 흡착한 열처리셀룰로오스의 용해 현상은 셀룰로오스의 결정구조 붕괴와 염기성 가스의 흡착량 증가에 의한 것으로 추측된다.

• Applied Biological Chemistry
• /
• 제43권1호
• /
• pp.18-23
• /
• 2000

찹쌀 14 품종의 전분 미세구조는 효소처리에 의해서 debranching시킨 전분의 glucose chain length 분포 비교에 의해서 수행되었고, 찹쌀 품종별로 미세구조상에 차이가 있었다. 짧은 쇄장을 다량 함유하고 있는 찰품종은 병곡이었으며, 상대적으로 긴 쇄장을 다량 함유하고 있는 품종은 TP2579Al이었다. 15% $H_2SO_4$에 대한 가수분해도는 샤레벼-152-1-B가 가장 높았으며, 산동 47이 가장 낮았다. X선 회절도는 14 품종 찹쌀 모두 전형적인 A형이었다. Glucoamylase에 의한 가수분해도의 양상은 품종에 따라 차이가 있었으며, 거창 1 및 병곡은 $37^{\circ}C$에서 3시간 작용시킴에 의해 100% 가수분해 되었다.

• Advances in concrete construction
• /
• 제11권1호
• /
• pp.81-88
• /
• 2021

Rice Husk Ash (RHA) geopolymer paste activated by sodium aluminate were characterized by X-ray diffractogram (XRD), scanning electron microscope (SEM), energy dispersion X-Ray analysis (EDAX)and fourier transform infrared spectroscopy (FTIR). Five series of RHA geopolymer specimens were prepared by varying the Si/Al ratio as 1.5, 2.0, 2.5, 3.0 and 3.5. The paper focuses on the correlation of microstructure with hardened state parameters like bulk density, apparent porosity, sorptivity, water absorption and compressive strength. XRD analysis peaks indicates quartz, cristobalite and gibbsite for raw RHA and new peaks corresponding to Zeolite A in geopolymer specimens. In general, SEM micrographs show interconnected pores and loosely packed geopolymer matrix except for specimens made with Si/Al of 2.0 which exhibited comparatively better matrix. Incorporation of Al from sodium aluminate were confirmed with the stretching and bending vibration of Si-O-Si and O-Si-O observations from the FTIR analysis of geopolymer specimen. The dense microstructure of SA2.0 correlate into better performance in terms of 28 days maximum compressive strength of 16.96 MPa and minimum for porosity, absorption and sorptivity among the specimens. However, due to the higher water demand to make the paste workable, the value of porosity, absorption and sorptivity were reportedly higher as compared with other geopolymer systems. Correlation regression equations were proposed to validate the interrelation between physical parameters and mechanical strength. RHA geopolymer shows comparatively lower compressive strength as compared to Fly ash geopolymer.

• Journal of the Korean Wood Science and Technology
• /
• 제51권1호
• /
• pp.1-13
• /
• 2023

Sengon (Falcataria moluccana Miq.) tree offers a wood of low quality and durability owing to its low density and thin cell walls. This study aimed to improve the properties of sengon wood by making the wood magnetic, producing new functions, and characterizing magnetic sengon wood. Each wood sample was treated using one of the following impregnation solutions: Untreated, 7.5% nano magnetite-furfuryl alcohol (Fe₃O₄-FA), 10% nano Fe₃O₄-FA, and 12.5% nano Fe₃O₄-FA. The impregnation process began with vacuum treatment at 0.5 bar for 2 h, followed by applying a pressure of 1 bar for 2 h. The samples were then tested for dimensional stability and density and characterized using scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM-EDX), Fourier transform infrared spectrometry (FTIR), X-ray diffraction (XRD) analysis, and vibrating sample magnetometry (VSM) analysis. The results showed that the Fe₃O₄-FA impregnation treatment considerable affected the dimensional stability, measured in terms of weight percent gain, anti-swelling efficiency, water uptake, and bulking effect, as well as the density of sengon wood. Changes in wood morphology were detected by the presence of Fe deposits in the cell walls and cell cavities of the wood using SEM-EDX analysis. XRD and FTIR analyses showed the appearance of magnetite peaks in the diffractogram and Fe-O functional groups. Based on the VSM analysis, treated sengon wood is classified as a superparamagnetic material with soft magnetic properties. Overall, 10% Fe₃O₄-FA treatment led to the highest increase in dimensional stability and density of sengon wood.

• Journal of Applied Biological Chemistry
• /
• 제50권4호
• /
• pp.234-238
• /
• 2007

The effects of ultra-fine pulverization on the physicochemical properties of rice starch (RS) were investigated using a high impact planetary mill. After pulverization, RVA characteristics, peak viscosity, break down, and set back values of RS decreased from 274.75 to 9.42 RVU, 214.46 to 6.17 RVU, and 87.80 to 17.00 RVU, respectively. The pasting properties also changed significantly. X-Ray diffractogram revealed RS had four A-type peaks, which disappeared after pulverization. The peak temperature and gelatinization enthalpy of RS using differential scanning calorimetry (DSC) were 13.99 J/g at $75.14^{\circ}C$, whereas the pulverized RS (PRS) had two peaks, 0.13 J/g at $63.88^{\circ}C$ and 1.23 J/g at $101.24^{\circ}C$. DSC measurement showed the retrogradation degree of PRS was lower than that of RS after storage at 4 and $25^{\circ}C$. The enzymatic (${\alpha}$-amylase) digestibilities of RS and PRS were 72.7 and 77.3%, respectively.

• 한국재료학회지
• /
• 제20권6호
• /
• pp.289-293
• /
• 2010

Silicon quantum dots (Si QDs) in a superlattice for high efficiency tandem solar cells were fabricated by magnetron rf sputtering and their characteristics were investigated. SiC/$Si_{1-x}C_x$ superlattices were deposited by co-sputtering of Si and C targets and annealed at $1000^{\circ}C$ for 20 minutes in a nitrogen atmosphere. The Si QDs in Si-rich layers were verified by transmission electron microscopy (TEM) and X-ray diffraction. The size of the QDs was observed to be 3-6 nm through high resolution TEM. Some crystal Si and -SiC peaks were clearly observed in the grazing incident X-ray diffractogram. Raman spectroscopy in the annealed sample showed a sharp peak at $516\;cm^{-1}$ which is an indication of Si QDs. Based on the Raman shift the size of the QD was estimated to be 4-6 nm. The volume fraction of Si crystals was calculated to be about 33%. The change of the FT-IR absorption spectrum from a Gaussian shape to a Lorentzian shape also confirmed the phase transition from an amorphous phase before annealing to a crystalline phase after annealing. The optical absorption coefficient also decreased, but the optical band gap increased from 1.5 eV to 2.1 eV after annealing. Therefore, it is expected that the optical energy gap of the QDs can be controlled with growth and annealing conditions.

• 폴리머
• /
• 제24권3호
• /
• pp.299-305
• /
• 2000

고온에서 열적 안정성이 우수한 hybrid 세라믹 전구체를 합성하기 위하여 polycarbosilane (PCS)의 화학적 개질에 의해 Si-O-Ti-C 구조를 갖는 세라믹 전구체를 합성하였다. 합성한 공중합체의 FT-IR 스펙트럼 결과 2893, 1092t 609$cm^{-1}$ / 부근에서 피크변화를 나타났으며, $^1$H-NMR 스펙트럼의 $\delta$=3.8, 2.0, 0.6 ppm 부근에서 특성피크가 나타나는 것을 확인함으로써 전구체 합성을 확인하였다. 초기 열분해 온도와 열분해 전환율 변화를 알아보기 위한 열중량 분석 (TGA) 결과 열분해 초기 온도가 30$0^{\circ}C$로 낮아졌으며 열분해 전환율도 74 wt%로 순수한 PCS에 비해 10 wt%가 증가함을 보였다. 또한 150$0^{\circ}C$까지 열분해시킨 후 X-선 회절분석 결과 2$\theta$=35.7, 42.2, 61.0$^{\circ}$에서 결정성 피크로 $\beta$-SiC의 전환을 확인하였다.

• The Journal of Advanced Prosthodontics
• /
• 제13권6호
• /
• pp.385-395
• /
• 2021

PURPOSE. To characterize the microstructure of three yttria partially stabilized zirconia ceramics and to compare their hardness, indentation fracture resistance (IFR), biaxial flexural strength (BFS), and fatigue flexural strength. MATERIALS AND METHODS. Disc-shaped specimens were obtained from 3Y-TZP (Vita YZ HT), 4Y-PSZ (Vita YZ ST) and 5Y-PSZ (Vita YZ XT), following the ISO 6872/2015 guidelines for BFS testing (final dimensions of 12 mm in diameter, 0.7 and 1.2 ± 0.1 mm in thicknesses). Energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses were performed, and mechanical properties were assessed by Vickers hardness, IFR, quasi-static BFS and fatigue tests. RESULTS. All ceramics showed similar chemical compositions, but mainly differed in the amount of yttria, which was higher as the amount of cubic phase in the diffractogram (5Y-PSZ > 4Y-PSZ > 3Y-TZP). The 4Y- and 5Y-PSZ specimens showed surface defects under SEM, while 3Y-TZP exhibited greater grain uniformity on the surface. 5Y-PSZ and 3Y-TZP presented the highest hardness values, while 3Y-TZP was higher than 4Y- and 5Y-PSZ with regard to the IFR. The 5Y-PSZ specimen (0.7 and 1.2 mm) showed the worst mechanical performance (fatigue BFS and cycles until failure), while 3Y-TZP and 4Y-PSZ presented statistically similar values, higher than 5Y-PSZ for both thicknesses (0.7 and 1.2 mm). Moreover, 3Y-TZP showed the highest (1.2 mm group) and the lowest (0.7 mm group) degradation percentage, and 5Y-PSZ had higher strength degradation than 4Y-PSZ group. CONCLUSION. Despite the microstructural differences, 4Y-PSZ and 3Y-TZP had similar fatigue behavior regardless of thickness. 5Y-PSZ had the lowest mechanical performance.

• 한국식품과학회지
• /
• 제45권6호
• /
• pp.747-753
• /
• 2013

고구마의 가공공정(절단, 성형, 세척) 중 발생하는 고구마 가공슬러지로부터 고구마전분을 회수하여 전분소재로서의 활용가능성을 재고하기 위해 회수된 고구마전분들의 물리화학적 특성을 조사하였고 고구마 가공 슬러지의 냉동저장에 따른 고구마전분의 특성 변화를 비교하였다. 고구마 가공 슬러지로부터 회수된 전분들의 총전분 함량은 94.1-95.6%의 범위에 있었으나 겉보기 아밀로오스와 인 함량은 냉동 고구마 가공 슬러지로부터 회수된 고구마 전분이 다른 전분들에 비해 유의적으로 낮았다. 냉동저장 처리는 고구마전분의 아밀로펙틴 분지사슬 분포에 큰 영향을 미치지 않았으나 고구마전분 입자의 결정구조를 변형시켰으며 무정형 영역을 감소시켰다. 이로 인해 고구마전분의 팽윤력과 페이스팅 점도특성은 감소하였으며 최대호화온도와 호화종결온도는 상승하는 결과를 초래하였다. 전체적인 결과를 고려할 때 고구마 가공 슬러지를 획득한 즉시 회수한 고구마전분은 고구마로부터 직접 분리한 고구마전분과 물리화학적 특성이 유사하여 상업적인 전분소재로 사용가능할 것으로 기대되지만 냉동저장된 고구마 가공 슬러지로부터 분리 정제한 고구마전분을 상업적으로 이용하기 위해서는 가공식품에 있어 이의 가공적성 및 최종품질에 대한 영향 조사가 선행되어야 할 것 같다.