• 한국토양비료학회지
• /
• 제6권3호
• /
• pp.159-163
• /
• 1973

당밀(糖密)을 원료(原料)로 하여 발효법(醱酵法)으로 구르타민산(酸)소다를 제조(製造)할 때 부생(副生)하는 잔사(殘渣)를 가공(加工)하여 만든 구르타민산잔사가공비료(酸殘渣加工肥料) 시제품(試製品)에 대(對)하여 그 성질(性質)을 조사(調査)하고 그 비효를 요소(尿素), 퇴비(堆肥) 및 미강(米糠)과 대비(對比)해 옥수수 재배시험(栽培試驗)을 통(通)하여 검토(檢討)했든바 그 결과(結果)를 요약(要約)하면 아래와 같다. 1) 공시(供試) 구르타민산잔사가공물(酸殘渣加工物)은 유안(硫安), 염안(鹽安) 및 종류미상(種類未詳)의 복염등(複鹽等)의 무기물(無機物)과 수용성(水溶性) 아미노산류(酸類) 및 불용성(不溶性) 탄소화합물(炭素化合物)의 혼합물(混合物)임이 밝혀졌다. 2) 이 물질(物質)에 함유(含有)된 속효성N비료부분(肥料部分)의 효과는 요소(尿素)와 대등(對等)하다. 3) 이 물질(物質)에 함유(含有)된 유기물(有機物)은 옥수수의 수량(收量)에 미친 효과면에서 퇴비(堆肥)나 미강(米糠)과 대등(對等)한것 같다. 4) 이 물질(物質)의 시용(施用)은 옥수수의 양분흡수(養分吸收)나 기타(基他) 생리작용(生理作用)에 특이성(特異性)있는 해(害)를 미치지 않았다. 5) 이 물질(物質)에 함유(含有)된 유기물(有機物)이 토양중(土壤中) 철(鐵)의 유효화에 미치는 영향(影響)이 타유기물(他有機物)과 상이(相異)할 가능성(可能性)이 있음을 논(論)했다. 6) 이 물질(物質)의 시용(施用)은 토양(土壤)을 산성화(酸性化) 시키는 경향(傾向)이 뚜렷하며 토양중(土壤中) 가급태유황(可給態硫黃)과 토양유기물함량(土壤有機物含量)을 높이는 경향(傾向)이 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2226-2230
• /
• 2007

As a cathode material of lithium rechargeable batteries, charged Li[Co0.1Ni0.15Li0.2Mn0.55]O2 electrodes, which were aged thermally at 25 oC and 90 oC respectively, were characterized by means of charge/discharger, impedance spectroscopy, and X-ray diffraction. The discharge capacity diminution of the electrodes aged at 25 oC and 90 oC for 1 week was 4% and 23%, respectively. The cell aged at 25 oC was recovered on cycling. However, the capacity loss after ageing at 90 oC was not recovered in a subsequent cycling test, which demonstrates that the reaction occurring during ageing at 90 oC is irreversible. A significant impedance increase of aged electrode at 90 oC is associated with irreversible capacity loss. The structural changes including phase transformation were not detected by XRD analysis, because it could be due to out of detection limit. After ageing, impedance was slightly decreased during subsequent cycling test. It could be explained the cyclic performance of aged sample is stable. The thermal stability was not deteriorated by ageing even at the high temperature of 90 oC.

• Bulletin of the Korean Chemical Society
• /
• 제27권8호
• /
• pp.1175-1180
• /
• 2006

Si-C composites were prepared by the carbonization of polyaniline (PAn) coated on silicone powder. The physical and electrochemical properties of the Si-C composites were characterized by particle-size analysis, X-ray diffraction, scanning electron microscopy, and battery electrochemical tests. The average particle size of Si was increased by the coating of Pan but somewhat reduced by the carbonization to give silicone-carbon composites. The co-existence of crystalline silicone and amorphous-like carbon was confirmed by XRD analyses. SEM photos showed that the silicone particles were well covered with carbonaceous materials, depending on the PAn content. Si-C$\mid$Li cells were fabricated using the Si-C composites and tested using galvanostatic charge-discharge. Si-C$\mid$Li cells gave better electrochemical properties than Si|Li cells. Si-C$\mid$Li cells using Si-C from HCl-undoped precursor PAn showed better electrochemical properties than precursor PAn doped in HCl. The addition of an electrolyte containing 4-fluoroethylene carbonate (FEC) increased the initial discharge capacity. Also, another electrochemical test, the galvanostatic charge-discharge test with GISOC (gradual increasing of the state of charge) was carried out. Si-C(Si:PAn = 50:50 wt. ratio)|Li cell showed 414 mAh/g of reversible specific capacity, 75.7% of IIE (initial intercalation efficiency), 35.4 mAh/g of IICs (surface irreversible specific capacity).

• 콘크리트학회논문집
• /
• 제25권5호
• /
• pp.565-572
• /
• 2013

CBPC(chemically-bonded phosphate ceramic) 바인더는 사소 MgO와 인산의 강력한 산-염기 반응을 이용한 초속경 보수재료로서, 시멘트와는 달리 CaO의 함량을 10% 이하로 줄인 재료이다. 이번 실험에서는 CBPC 바인더에 천연광물 및 산업부산물로 이뤄진 6가지 충전재들을 첨가하고 물리적 성능 및 수화 반응을 관찰하였다. 실리카퓸을 첨가한시편이 압축강도 및 동탄성계수가 상대적으로 높았고, 특히 장기강도 면에서 뚜렷한 증가율을 보였다. 또한 XRD 분석을 통해 실리카퓸을 첨가한 시편에서 마그네슘의 수화물인 M-S-H gel and $MgCO_3$ 피크를 관찰 할 수 있었다. 칼슘 성분이 다량 포함된 충전재를 넣은 시편의 경우 강도 및 내구성 면에서 좋지 않은 결과를 낳은 것으로 보아, 칼슘과 마그네슘 수화물은 서로 화학적으로 결합하지 않으므로 섞지 않는 것이 좋다는 결론을 도출했다. 결과적으로 MgO를 기반으로 하는 모르타르에는 순수하게 실리카 성분으로만 이루어진 실리카 흄과 같은 충전재가 알맞은 것으로 나타났다.

• The Journal of Advanced Prosthodontics
• /
• 제12권5호
• /
• pp.265-272
• /
• 2020

PURPOSE. The aims of this study were to investigate mechanical properties and hydrothermal degradation behaviour of the cubic-containing translucent yttrium oxide stabilized tetragonal zirconia polycrystal (Y-TZP). MATERIALS AND METHODS. Four groups of Y-TZP (T, ST, XT, and P), containing different amount of cubic crystal, were examined. Specimens were aged by autoclaving at 122℃ under 2 bar pressure for 8 h. Phase transformation was analyzed using X-ray diffraction (XRD) to measure phase transformation (t→m). Kruskal-Wallis test was used to determine the difference. Surface hardness, biaxial flexural strength, and fracture toughness in values among the experimental groups and verified with Wilcoxon matched pairs test for hardness values and Mann Whitney U for flexural strength and fracture toughness. RESULTS. XRD analysis showed no monoclinic phase in XT and P after aging. Only Group T showed statistically significant decreases in hardness after aging. Hydrothermal aging showed a significant decrease in flexural strength and fracture toughness in group T and ST, while group XT and P showed no effect of aging on fractural strength and fracture toughness with P<.05. CONCLUSION. Hydrothermal aging caused reduction in mechanical properties such as surface hardness, biaxial flexural strength, and fracture toughness of Y-TZP zirconia. However, cubic-containing zirconia (more than 30% by volume of cubic crystal) was assumed to have high resistance to hydrothermal degradation. Clinical significance: Cubic-containing zirconia could withstand the intraoral aging condition. It could be suggested to use as a material for fabrication of esthetic dental restoration.

• 한국광물학회지
• /
• 제19권4호
• /
• pp.301-310
• /
• 2006

수열합성법에 의하여 Na-P 형 및 Na-A형 제올라이트로부터 스멕타이트를 합성하였고 이들의 물리화학적 특성을 연구하였다. 제올라이트로부터 스멕타이트의 최적 합성조건은 반응온도 $290^{\circ}C$, 반응시간 72 h, 자생압력 $75{\sim}100kgf/cm^2$였으며, 스멕타이트의 합성을 위한 초기 반응 용액의 pH는 Na-P형 제올라이트의 경우, pH 6, 그리고 Na-A형 제올라이트의 경우, pH 10이었다. Na-P형 및 Na-A 형 제올라이트로부터 합성된 스멕타이트에 대한 부정방위, 정방위, 에티렌 그리콜 및 Greene-Kelly 시험법 등을 통하여 합성된 스멕타이트가 $12{\AA}$-바이델라이트임을 확인하였으며, 이들의 특성을 연구하였다.

• 한국표면공학회지
• /
• 제38권5호
• /
• pp.202-206
• /
• 2005

Nitriding treatments were conducted on tool steel (SKD 61) at a temperature of $500^{\circ}C$ for 5 hr using high vacuum direct current (DC) plasma, with ammonia and argon as source gases. The structural and compositional changes produced in the nitrided layers by applying different ratios of Ar to $NH_{3}\;(n_{Ar}/n_{NH3}) were investigated using glancing x-ray diffraction (GXRD), optical microscopy, atomic force microscopy (AFM), micro-Vickers hardness testing, and pin-on-disc type tribometer. Nitriding case depths of around of $50{\mu}m$ were produced, varying slightly with different ratios of $n_{Ar}/n_{NH3}. It was found that the specimen surface hardness was 1150 Hv with $n_{Ar}/n_{NH3}=1, increasing to a maximum value of 1500 Hv with $n_{Ar}/n_{NH3}=5. With a further increase in ratio to $n_{Ar}/n_{NH3}=10, the surface hardness of the specimen reduced slightly to a value of 1370 Hv. These phenomena were caused by changes of the crystallographic structure of the nitride layers, i.e the $\gamma'-Fe_{4}N$ phase only was observed in the sample treated with $n_{Ar}/n_{NH3}$=1, and the intensity of the $\gamma'-Fe_{4}N$ phase were reduced but new phase of $\varepsilon'-Fe_{3}N$, which was known as a high hardness, with increasing $n_{Ar}/n_{NH3}. Also, the relative weight loss of counterface of the pin-on-disc with unnitrided steel was 0.2. And that of nitrided steel at a gas mixture ($n_{Ar}/n_{NH3}) of 1, 5, 7, and 10 was 0.4, 0.7, 0.6, and 0.5 mg, respectively. This means that the wear resistance of the nitrided samples could be increased by a factor of 2 at least than that of unnitrided steel.

• Tribology and Lubricants
• /
• 제30권2호
• /
• pp.108-115
• /
• 2014

The friction behaviors of bulk amorphous thermal spray coating (BAC) and second phase-reinforced composite coatings using a high velocity oxy-fuel spraying process were investigated using a ball-on-disk test rig that slides against a ceramic ball in an atmospheric environment. The surface temperatures were measured using an infrared thermometer installed 50 mm from the contact surface. The crystallinities of the coating layers were determined using X-ray diffraction. The morphologies of the coating layers and worn surfaces were observed using a scanning electron microscope and energy-dispersive spectroscopy. The results show that the friction behavior of the monolithic amorphous coating was sensitive to the testing conditions. Under lower than normal loads, a low and stable friction coefficient of about 0.1 was observed, whereas under a higher relative load, a high and unstable friction coefficient of greater than 0.3 was obtained with an instant temperature increase. For the composite coatings, a sudden increase in friction coefficient did not occur, i.e., the transition region did not exist and during the friction test, a gradual increase occurred only after a significant delay. The BAC morphology observations indicate that viscous plastic flow was generated with low loads, but severe surface damage (i.e., tearing) occurred at high loads. For composite coatings, a relatively smooth surface was observed on the worn surface for all applied loads.

• 한국표면공학회지
• /
• 제42권2호
• /
• pp.86-94
• /
• 2009

Various types of multilayer coatings including Al/$Al_2O_3$ structure have been prepared on Nd-Fe-B permanent magnet to modify the morphology of the coating and to enhance the corrosion resistance of the magnet. Magnetron sputtering has been employed to make the multilayer coatings. $Al_2O_3$sputtering conditions were optimized in reactive sputtering by varying the deposition parameters. The formation of $Al_2O_3$ film was confirmed from the binding energy shift measured by electron spectroscopy for chemical analysis. 3 types of coating structures were designed and prepared by magnetron sputtering. The coating structures consist of (1) single Al coating, (2) modified coatings having oxide or plasma treated layer in the middle of coating structure, and (3) Al/$Al_2O_3$ multilayer coatings. Surface and cross-sectional morphologies showed that Al/$Al_2O_3$ multilayer grew as a layered structure, and that very compact Zone 3 like structure were formed. X-ray diffraction peak showed that the crystal orientations of multilayer coatings were similar to that of the bulk powder pattern. Hardness increased drastically when the Al thickness was around 1im in the Al/$Al_2O_3$ multilayer. From the salt spray test and pressure cooker test, it has been shown that the multilayer coatings showed good corrosion resistance compared to Al single or modified layer coatings.

• The Journal of Advanced Prosthodontics
• /
• 제8권6호
• /
• pp.479-488
• /
• 2016

PURPOSE. The aim of this study was to test the modulus of elasticity (E) across the interfaces of yttria stabilized zirconia (YTZP) / veneer multilayers using nanoindentation. MATERIALS AND METHODS. YTZP core material (KaVo-Everest, Germany) specimens were either coated with a liner (IPS e.max ZirLiner, Ivoclar-Vivadent) (Type-1) or left as-sintered (Type-2) and subsequently veneered with a pressable glass-ceramic (IPS e.max ZirPress, Ivoclar-Vivadent). A $5{\mu}m$ (nominal tip diameter) spherical indenter was used with a UMIS CSIRO 2000 (ASI, Canberra, Australia) nanoindenter system to test E across the exposed and polished interfaces of both specimen types. The multiple point load - partial unload method was used for E determination. All materials used were characterized using Scanning Electron Microscopy (SEM) and X - ray powder diffraction (XRD). E mappings of the areas tested were produced from the nanoindentation data. RESULTS. A significantly (P<.05) lower E value between Type-1 and Type-2 specimens at a distance of $40{\mu}m$ in the veneer material was associated with the liner. XRD and SEM characterization of the zirconia sample showed a fine grained bulk tetragonal phase. IPS e-max ZirPress and IPS e-max ZirLiner materials were characterized as amorphous. CONCLUSION. The liner between the YTZP core and the heat pressed veneer may act as a weak link in this dental multilayer due to its significantly (P<.05) lower E. The present study has shown nanoindentation using spherical indentation and the multiple point load - partial unload method to be reliable predictors of E and useful evaluation tools for layered dental ceramic interfaces.