• 한국초전도ㆍ저온공학회논문지
• /
• 제18권4호
• /
• pp.1-4
• /
• 2016

We investigated the relation between the Cu-O bond length and the superconducting properties of $BaSnO_3$ (BSO)-added $GdBa_2Cu_3O_{7-x}$ (GdBCO) thin films by using extended x-ray absorption fine structure (EXAFS) spectroscopy. 4 wt.% $BaSnO_3$ (BSO) added $GdBa_2Cu_3O_{7-x}$ (GdBCO) thin films with varying thickness from $0.2{\mu}m$ to $1.0{\mu}m$ were fabricated by using pulsed laser deposition (PLD) method. The transition temperature ($T_c$) and the residual resistance ratio (RRR) of the GdBCO films increased with increasing thickness up to $0.8{\mu}m$, where the crystalline BSO has the highest peak intensity, and then decreased. This uncommon behaviors of $T_c$ and RRR are likely to be created by the addition of BSO, which may change the ordering of GdBCO atomic bonds. Analysis from the Cu K-edge EXAFS spectroscopy showed an interesting thickness dependence of ordering behavior of BSO-added GdBCO films. It is noticeable that the ordering of Cu-O bond and the transition temperature are found to show opposite behaviors in the thickness dependence. Based on these results, the growth of BSO seemingly have evident effect on the alteration of the local structure of GdBCO film.

• 한국패류학회지
• /
• 제31권4호
• /
• pp.279-283
• /
• 2015

본 연구는 해산 이매패 8종에 대해 패각 결정 (結晶)에 대한 분광학적 특성을 XRD 기법을 이용하여 조사하고 종간 근연관계에 대해 기존의 조사와 비교하였다. XRD분석을 수행한 결과, 바지락, 백합, 꼬막, 새조개의 패각은 $CaCO_3$의 orthorhombic 결정형인 aragonite였으며, 가리비와 굴의 패각은 trigonal-rhombohedral 결정형인 calcite였다. 담치와 키조개의 경우 aragonite와 calcite가 혼합된 결정으로 분석되었다. XRD를 이용하여 측정된 패각의 x-선 회절정보는 패류별 특이성을 나타내었으며, 이러한 특성을 이용한 과 (Family) 간 근연관계를 조사한 결과 현재 알려진 분류체계를 잘 대변하고 있었다. 결론적으로 패각 결정 (結晶)에 대한 분광학적 특성은 조사된 패류의 과 (Family) 수준에서 특이성을 잘 나타내며, 향후 종수준의 연구를 통한 종 동정을 위한 추가 연구가 필요함을 시사하였다. 또한 이러한 기술은 소량의 패각을 이용하므로 미확인 소량 절편의 패류 종 파악에 유용하게 이용될 수 있을 것으로 기대된다.

• 한국잠사곤충학회지
• /
• 제36권2호
• /
• pp.138-146
• /
• 1994

야잠사, Antheraea pernyi와 Antheraea yamamai의 구조특성을 살폅기 위하여 x-ray 회절 분석, IR 분광법, 편광현미경 관찰, 아미노산 분석을 행하였으며 섬유밀도, 열적 성질 및 동점탄성 성질을 살펴보았다. 그들의 구조 및 물리적 성질에 대한 결과를 가잠사(Bombyx mori)의 특성과 비교하여 요약하면 다음과 같다. 1. 작잠견사와 천잠견사의 아미노산 조성에는 큰 차이가 없었으나 천잠견사의 경우 반응성이 높은 극성아미노산이 다소 많은 것으로 나타났으며 가잠견사의 경우 glycine, 야잠사는 alanine 함량이 가장 많으므로 이들의 견사의 결정구조 특성에 관여되었다고 할 수 있다. 2. 섬유밀도 측정결과 천잠사(1.265~1.301g/㎤), 작잠사(1.308~1.311g/㎤), 가잠사(1.355~1.356g/㎤) 순으로 나타났으며 계산된 결정화도 값도 천잠사(51%), 작잠사(52%), 가잠사(64%) 순으로 나타났다. 3. 작잠사와 천잠사의 x-ray 회절곡선은 차이점이 없이 2$\theta$기호 16.7。와 20.5。에서 (002)면과 (201)면의 특징적인 double peak이 관찰되었으며 가잠사의 경우 2$\theta$기호 20.5。 부근에서 강한 회절 peak이 나타나 결정 구조가 서로 다른 것으로 나타났다. 4. IR spectrum 관찰결과 작잠사와 천잠사는 공히 alanine-alanine sequence에 관계되는 흡수 peak이 나타나며 가잠사는 glycine-alanine sequence에 관련된 group의 흡수 peak이 나타났다. IR 결정화도는 밀도측정에 의한 결과와 동일하게 천잠사(53.9%), 작잠사(54.3%), 가잠사(70.4%) 순으로 계산되었다. 5. 복굴절률은 가잠사의 경우 0.0556에 비하여 야잠사는 0.0216으로 낮은 값을 나타내며 광학배향도값도 가잠사가 2배 정도 높은 것으로 나타났다. 편광현미경에 의한 표면특성은 야잠사의 경우 섬유축방향으로 microfibril들이 줄무늬 모양으로 뚜렷하게 관찰되었다. 6. DSC 및 TGA 분석에 의하여 열분해특성을 살펴본 결과 열분해온도는 가잠사, 작잠사, 천잠사 순으로 350。 부근에서 나타났으며 각각의 구조특성에 따라 열분해가 진행되는 단계가 달리 나타나는 것으로 관찰되어 열안정성의 차이를 보여주었다. 7. Dynamic storage modulus와 loss modulus를 측정하여 얻은 유리전이온도는 가잠사 22$0^{\circ}C$, 천잠사, 24$0^{\circ}C$ 및 작잠사 255$^{\circ}C$의 값을 나타냈으며 이것은 비결정영역의 전이형상이 각 견사의 구조특성에 따라 다른 거동을 하고 있음을 의미한다.

• 한국세라믹학회지
• /
• 제31권6호
• /
• pp.617-622
• /
• 1994

Single crystals of misfit layered (LaS)xVS2(x 1.18) were grown using LaCl3(or I2) as a mineralizer (or transport agent) for the single crystal X-ray diffraction analysis. Procession photographs of (LaS)xVS2(x 1.18) were analyzed as the stacking structure of two kinds of LaS-and VS2-subcell. The result shows that two sublattices have common periodicities along the a*-and c*-axes, respectively, but not along the b*-axis. Sublattice dimensions of LaS and VS2 layers along b-axis were 5.67$\AA$ and 3.42$\AA$, respectively. Their ratio was 1.657 which is very close to 5/3.

• Bulletin of the Korean Chemical Society
• /
• 제25권4호
• /
• pp.480-484
• /
• 2004

$LiGaO_2$ films have been grown on Si (100) substrates using a new single precursor $[Li(OCH_2CH_2OCH_3)_2-Ga(CH_3)_2]_2$ under high vacuum conditions $(5{\times}10^{-6}Torr)$. The $[Li(OCH_2CH_2OCH_3)_2Ga(CH_3)_2]_2$ was synthe-sized and characterized by using spectroscopic methods and single-crystal X-ray diffraction analysis. The chemical composition, crystalline structure, and morphology of the deposited films were investigated by X-ray photoelectron spectroscopy, X-ray diffraction, and scanning electron microscopy. The results show that polycrystalline $LiGaO_2$ films preferentially oriented in the [010] direction can be deposited on Si (100) at 500-550$^{\circ}C$ by metal organic chemical vapor deposition (MOCVD). The single precursor $[LiOCH_2CH_2OCH_3)_2-Ga(CH_3)_2]_2$ has been found suitable for chemical vapor deposition of $LiGaO_2$ thin films on Si substrates.

• Journal of the Korean Wood Science and Technology
• /
• 제22권3호
• /
• pp.26-31
• /
• 1994

To provide further information for reutilization of the waste wood obtained after cultivating oak mushroom in Kangwon-do, the crystal structures of the waste wood were investigated and compared to those of normal woods by a series of x-ray diffraction analysis. The results obtained are as follows: 1. An x-ray diffraction diagram of cultivated wood for 5 years was same as that of typical cellulose with some orientation of cellulose crystallites, but that of cultivated wood for 8 years a random. 2. Crystallinity indices in normal and cultivated woods for 5 years ranged from 57% to 60%. In the cultivated wood for 8 years, however, the value showed about 40%. 3. Crystallite widths of cultivated woods for 5 years and for 8 years were 3 nm and 2.5 nm, respectively. 4. Intensity ratios of equatorial and meridional layers did not show any significant differences. From the above results, it is clear that the waste wood obtained after cultivating oak mush room for 5 years showed basically same crystal structures with normal wood. Therefore, we think that the waste wood may be used available for cellulosic material instead of normal wood.

• 천문학회보
• /
• 제36권2호
• /
• pp.87.1-87.1
• /
• 2011

Since early 90's, the solar X-ray telescopes such as Yohkoh SXT and Hinode XRT have observed coronal magnetic structures on the Sun's surface in the range of about $40'{\times}40'$ field-of-view (FOV) covering the full solar disk. Thus it has been stressed by the scientists that the optical structure of solar telescopes should be designed with care for improving the uniformity over a wide FOV. There would be, however, no unique solution in designing the optical system of a telescope for overcoming perfectly the problem of off-axis response variation. As a consequence, the correction of optical imperfectness of telescopes has become an important calibration step that should be performed beforehand when the observed images are to be used for photometric purposes. In particular, a special care should be taken when performing the temperature analysis with thin and thick filters for flaring activities observed at the periphery of the full FOV. From the analyses of both pre-launch calibration and in-flight observation data, the optical characteristics for describing the performance of solar X-ray telescopes, especially in view of their energy dependence, will be introduced and discussed in our presentation.

• 한국전기전자재료학회논문지
• /
• 제23권7호
• /
• pp.517-520
• /
• 2010

Lead-free $0.9(Na_{0.52}K_{0.48})NbO_3$ - $0.1LiTaO_3$ piezoelectric ceramics doped with $Ag_2O$ (0-4 mol%) have been prepared by the conventional mixed oxide method. The structural and electrical properties were analyzed in order to find its potential applications. The crystal structure of 1-4 mol% Ag doped $0.9(Na_{0.52}K_{0.48})NbO_3$-$0.1LiTaO_3$ lead free piezoelectric ceramics were investigated for several sintering temperatures ($1100^{\circ}C$) by the use of X-ray diffraction analysis. In order to analyze the effect of Ag dopants on the $0.9(Na_{0.52}K_{0.48})NbO_3$-$0.1LiTaO_3$ ceramic, the diffraction intensity ratio of the (002) to (200) planes were calculated from the X-ray diffraction patterns of the ceramic samples.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.122-122
• /
• 2000

Magnesium oxide is thermodynamically very stable, has a low dielectric constant and a low refractive index, and has been widely used as substrate for growing various thin film materials, particulary oxides of the perovskite structure. There has been a considerable interest in integrating the physical properties of these oxides with semiconductor materials such as GaAs and Si. In this regard, it is considered very important to be able to grow MgO buffer layers epitaxially on the semiconductors. Various oxide films can then be grown on such buffer layers eliminating the need for using MgO single crystal substrates. Vapor phase epitaxy of magnesium oxide has been accomplished on Si(001) substrates in a high vacuum chamber using the single precursor methylmagnesium tert-butoxide in the temperature range 750-80$0^{\circ}C$. For the epitaxy of the MgO films, SiC buffer layers had to be grown on Si(001). The films were characterized by reflection high energy electron diffraction (RHEED) in situ in the growth chamber, and x-ray diffraction (XRD), x-ray pole figure analysis, scanning electron microscopy (SEM), and x-ray photoelectron spectroscopy (XPS) after the growth.

• 한국재료학회지
• /
• 제34권1호
• /
• pp.21-26
• /
• 2024

In this investigation, samples of the chemical (Hg_1-xPb_xBa₂Ca_1.8Mg_0.2Cu₃O_8+δ) were prepared utilizing a solid-state reaction technique with a range of lead concentrations (x = 0.0, 0.05, 0.10, and 0.20). Specimens were pressed at 8 tons per square centimeter and then prepared at 1,138 K in the furnace. The crystalline structure and surface topography of all samples were examined using X-ray diffraction (XRD) and atomic force microscopy (AFM). X-ray diffraction results showed that all of the prepared samples had a tetragonal crystal structure. Also, the results showed that when lead was partially replaced with mercury, an increase in the lead value impacted the phase ratio, and lattice parameter values. The AFM results likewise showed excellent crystalline consistency and remarkable homogeneity during processing. The electrical resistivity was calculated as a function of temperature, and the results showed that all samples had a contagious behavior, as the resistivity decreased with decreasing temperature. The critical temperature was calculated and found to change, from 102, 96, 107, and 119 K, when increasing the lead values in the samples from 0.0 to 0.05, 0.10, and 0.20, respectively.