• Progress in Superconductivity and Cryogenics
• /
• v.18 no.4
• /
• pp.1-4
• /
• 2016

We investigated the relation between the Cu-O bond length and the superconducting properties of $BaSnO_3$ (BSO)-added $GdBa_2Cu_3O_{7-x}$ (GdBCO) thin films by using extended x-ray absorption fine structure (EXAFS) spectroscopy. 4 wt.% $BaSnO_3$ (BSO) added $GdBa_2Cu_3O_{7-x}$ (GdBCO) thin films with varying thickness from $0.2{\mu}m$ to $1.0{\mu}m$ were fabricated by using pulsed laser deposition (PLD) method. The transition temperature ($T_c$) and the residual resistance ratio (RRR) of the GdBCO films increased with increasing thickness up to $0.8{\mu}m$, where the crystalline BSO has the highest peak intensity, and then decreased. This uncommon behaviors of $T_c$ and RRR are likely to be created by the addition of BSO, which may change the ordering of GdBCO atomic bonds. Analysis from the Cu K-edge EXAFS spectroscopy showed an interesting thickness dependence of ordering behavior of BSO-added GdBCO films. It is noticeable that the ordering of Cu-O bond and the transition temperature are found to show opposite behaviors in the thickness dependence. Based on these results, the growth of BSO seemingly have evident effect on the alteration of the local structure of GdBCO film.

• The Korean Journal of Malacology
• /
• v.31 no.4
• /
• pp.279-283
• /
• 2015

This study investigated spectroscopic characteristics of shell crystals of eight marine bivalve species using X-ray diffraction (XRD) analysis; moreover, the Family level relatedness of shellfish was investigated. In XRD analysis, the shells of Ruditapes philippinarum, Meretrix lusoria, Anadara granosa, and Fulvia mutica were found to have orthorhombic aragonite $CaCO_3$ crystals, while shells of Patinopecten yessoensis and Crassostrea gigas had trigonal-rhombohedral calcite crystals. The shells of Mytilus coruscus and Atrina pectinata were determined to have a mixture of aragonite and calcite crystals. XRD information revealed the Family level-specific characteristics of shellfish; the results agreed with the current taxonomic system. In conclusion, spectroscopic characteristics of shell crystals indicated Family-level characteristics of shellfish and suggested a more intense species-level investigation; this technology may be useful in identifying shellfish species using small quantities of shells.

• Journal of Sericultural and Entomological Science
• /
• v.36 no.2
• /
• pp.138-146
• /
• 1994

The structural characteristics of Antheraea yamamai and Antheraea pernyi silk were investigated by using x-ray diffraction method, IR spectroscopy and polarizing microscopy. The amino acid composition, fiber density, thermal decomposition temperature and glass transition temperature were also measured for relating these physical properties to the structure in comparison with those of Bombyx mori silk fiber. There was no significant structural difference between A. yamamai and A. pernyi silk fiber on an examination of x-ray diffraction curve and IR spectrum. Both of these wild silk fibers showed double diffraction peaks at the Bragg angle 2Θ16.7˚ and 20.5˚by x-ray diffraction analysis as well as IR absorption peaks for the bending vibration of specific groups related to ala-ala amino acid sequence. On the other hand, the x-ray diffraction curve and IR spectrum of Bombyx mori silk fiber are different from those of wild silk fibers, indicating different crystal structure as well as amino acid sequences. It showed under the polarizing microscope examination that the birefringence and optical orientation factor of wild silk fibers are much lower than those of B. mori silk. Also, the surface of degummed wild silk fibers was characterized by the longitudinal stripes of microfibrils in the direction of fiber axies. The amino acid composition, which is strongly related to the fine structure and properties, was not significantly different between these two wild silk fibers. However, the alanine content was somewhat less and polar amino acid content more for A. yamamai. As a result of fiber density measurement, the specific gravities of B. mori, A. pernyi and A. yamamai were 1.355~1.356, 1.308~1.311, 1.265~1.301g/㎤ in the order, respectively. The calculated crystallinity(%) was 64% for B. mori and 51~52% for wild silk fibers, which showed same trend by IR method in spite of somewhat higher value. The thermal decomposition behaviour was examined by DSC and TGA, showing that the degradation temperature was in the order of B mori, A. prernyi and A. yamamai at around 350$^{\circ}C$. It was also observed by TGA that the decomposition seems to proceed step by step according to their specific regions in the fiber structure, resulting the difference in their thermal stabilities. The glass transition temperature was turned out to be 220$^{\circ}C$ for B. mori, 240$^{\circ}C$ A. yamamai and 255$^{\circ}C$ A. pernyi by the dynamic mechanical analysis. It is expected that the chemical properties are affected by the dynamic mechanical behavior in accordance with their structural characters.

• Journal of the Korean Ceramic Society
• /
• v.31 no.6
• /
• pp.617-622
• /
• 1994

Single crystals of misfit layered (LaS)xVS2(x 1.18) were grown using LaCl3(or I2) as a mineralizer (or transport agent) for the single crystal X-ray diffraction analysis. Procession photographs of (LaS)xVS2(x 1.18) were analyzed as the stacking structure of two kinds of LaS-and VS2-subcell. The result shows that two sublattices have common periodicities along the a*-and c*-axes, respectively, but not along the b*-axis. Sublattice dimensions of LaS and VS2 layers along b-axis were 5.67$\AA$ and 3.42$\AA$, respectively. Their ratio was 1.657 which is very close to 5/3.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.4
• /
• pp.480-484
• /
• 2004

$LiGaO_2$ films have been grown on Si (100) substrates using a new single precursor $[Li(OCH_2CH_2OCH_3)_2-Ga(CH_3)_2]_2$ under high vacuum conditions $(5{\times}10^{-6}Torr)$. The $[Li(OCH_2CH_2OCH_3)_2Ga(CH_3)_2]_2$ was synthe-sized and characterized by using spectroscopic methods and single-crystal X-ray diffraction analysis. The chemical composition, crystalline structure, and morphology of the deposited films were investigated by X-ray photoelectron spectroscopy, X-ray diffraction, and scanning electron microscopy. The results show that polycrystalline $LiGaO_2$ films preferentially oriented in the [010] direction can be deposited on Si (100) at 500-550$^{\circ}C$ by metal organic chemical vapor deposition (MOCVD). The single precursor $[LiOCH_2CH_2OCH_3)_2-Ga(CH_3)_2]_2$ has been found suitable for chemical vapor deposition of $LiGaO_2$ thin films on Si substrates.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.3
• /
• pp.26-31
• /
• 1994

To provide further information for reutilization of the waste wood obtained after cultivating oak mushroom in Kangwon-do, the crystal structures of the waste wood were investigated and compared to those of normal woods by a series of x-ray diffraction analysis. The results obtained are as follows: 1. An x-ray diffraction diagram of cultivated wood for 5 years was same as that of typical cellulose with some orientation of cellulose crystallites, but that of cultivated wood for 8 years a random. 2. Crystallinity indices in normal and cultivated woods for 5 years ranged from 57% to 60%. In the cultivated wood for 8 years, however, the value showed about 40%. 3. Crystallite widths of cultivated woods for 5 years and for 8 years were 3 nm and 2.5 nm, respectively. 4. Intensity ratios of equatorial and meridional layers did not show any significant differences. From the above results, it is clear that the waste wood obtained after cultivating oak mush room for 5 years showed basically same crystal structures with normal wood. Therefore, we think that the waste wood may be used available for cellulosic material instead of normal wood.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.87.1-87.1
• /
• 2011

Since early 90's, the solar X-ray telescopes such as Yohkoh SXT and Hinode XRT have observed coronal magnetic structures on the Sun's surface in the range of about $40'{\times}40'$ field-of-view (FOV) covering the full solar disk. Thus it has been stressed by the scientists that the optical structure of solar telescopes should be designed with care for improving the uniformity over a wide FOV. There would be, however, no unique solution in designing the optical system of a telescope for overcoming perfectly the problem of off-axis response variation. As a consequence, the correction of optical imperfectness of telescopes has become an important calibration step that should be performed beforehand when the observed images are to be used for photometric purposes. In particular, a special care should be taken when performing the temperature analysis with thin and thick filters for flaring activities observed at the periphery of the full FOV. From the analyses of both pre-launch calibration and in-flight observation data, the optical characteristics for describing the performance of solar X-ray telescopes, especially in view of their energy dependence, will be introduced and discussed in our presentation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.7
• /
• pp.517-520
• /
• 2010

Lead-free $0.9(Na_{0.52}K_{0.48})NbO_3$ - $0.1LiTaO_3$ piezoelectric ceramics doped with $Ag_2O$ (0-4 mol%) have been prepared by the conventional mixed oxide method. The structural and electrical properties were analyzed in order to find its potential applications. The crystal structure of 1-4 mol% Ag doped $0.9(Na_{0.52}K_{0.48})NbO_3$-$0.1LiTaO_3$ lead free piezoelectric ceramics were investigated for several sintering temperatures ($1100^{\circ}C$) by the use of X-ray diffraction analysis. In order to analyze the effect of Ag dopants on the $0.9(Na_{0.52}K_{0.48})NbO_3$-$0.1LiTaO_3$ ceramic, the diffraction intensity ratio of the (002) to (200) planes were calculated from the X-ray diffraction patterns of the ceramic samples.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.122-122
• /
• 2000

Magnesium oxide is thermodynamically very stable, has a low dielectric constant and a low refractive index, and has been widely used as substrate for growing various thin film materials, particulary oxides of the perovskite structure. There has been a considerable interest in integrating the physical properties of these oxides with semiconductor materials such as GaAs and Si. In this regard, it is considered very important to be able to grow MgO buffer layers epitaxially on the semiconductors. Various oxide films can then be grown on such buffer layers eliminating the need for using MgO single crystal substrates. Vapor phase epitaxy of magnesium oxide has been accomplished on Si(001) substrates in a high vacuum chamber using the single precursor methylmagnesium tert-butoxide in the temperature range 750-80$0^{\circ}C$. For the epitaxy of the MgO films, SiC buffer layers had to be grown on Si(001). The films were characterized by reflection high energy electron diffraction (RHEED) in situ in the growth chamber, and x-ray diffraction (XRD), x-ray pole figure analysis, scanning electron microscopy (SEM), and x-ray photoelectron spectroscopy (XPS) after the growth.

• Korean Journal of Materials Research
• /
• v.34 no.1
• /
• pp.21-26
• /
• 2024

In this investigation, samples of the chemical (Hg_1-xPb_xBa₂Ca_1.8Mg_0.2Cu₃O_8+δ) were prepared utilizing a solid-state reaction technique with a range of lead concentrations (x = 0.0, 0.05, 0.10, and 0.20). Specimens were pressed at 8 tons per square centimeter and then prepared at 1,138 K in the furnace. The crystalline structure and surface topography of all samples were examined using X-ray diffraction (XRD) and atomic force microscopy (AFM). X-ray diffraction results showed that all of the prepared samples had a tetragonal crystal structure. Also, the results showed that when lead was partially replaced with mercury, an increase in the lead value impacted the phase ratio, and lattice parameter values. The AFM results likewise showed excellent crystalline consistency and remarkable homogeneity during processing. The electrical resistivity was calculated as a function of temperature, and the results showed that all samples had a contagious behavior, as the resistivity decreased with decreasing temperature. The critical temperature was calculated and found to change, from 102, 96, 107, and 119 K, when increasing the lead values in the samples from 0.0 to 0.05, 0.10, and 0.20, respectively.