• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.60.2-60.2
• /
• 2011

This study is to develop a 1kW-class small wind turbine blade which will be applicable to relatively low speed regions. For this blade, a high efficiency wind turbine blade is designed and a light and low cost composite structure blade is adopted considering fatigue life. In this study, shape design of 1kW-class small wind turbine blade for hybrid power generation system is carried out by BEMT(blade element momentum theory). X-FOIL open software was used to acquire lift and drag coefficients of the 2D airfoils used in power prediction procedure. Moreover, pressure and velocity distributions are investigated according to TSR by CFD analysis.

• Transactions on Electrical and Electronic Materials
• /
• 제11권3호
• /
• pp.112-115
• /
• 2010

This paper provides the properties of $TiO_2$ nanotube arrays which are fabricated by anodic oxidation of Ti metal. Highly ordered $TiO_2$ nanotube arrays could be obtained by anodic oxidation of Ti foil in $0.3\;wt{\cdot}%$ $NH_4F$ contained ethylene glycol solution at $30^{\circ}C$. The length, pore size, wall thickness, tube diameter etc. of $TiO_2$ nanotube arrays were analyzed by field emission scanning electron microscopy. Their crystal properties were studied by field emission transmission electron microscopy and X-ray photoelectron spectroscopy.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.60-60
• /
• 2014

By the pre-doping technique on graphene/copper foil, we obtained the pristine sheet resistance and optical transmittance of the chlorine doped-single layer graphene $245{\Omega}/sq$ and 97% at 550 nm wavelength, respectively. X-ray photoelectron spectroscopy revealed that an extremely high Cl coverage of 47.3% of monolayer graphene surface was achieved as the highest surface-coverage graphene doping material ever reported.

• 한국세라믹학회지
• /
• 제11권4호
• /
• pp.25-30
• /
• 1974

The mixture of quartz powder and slaked lime with plenty water was oscillated in an autoclave and treated hydrothermally under the pressure of 10 kg/$\textrm{cm}^2$ for 8 hours. The main mineral synthesized was confirmed 11$\AA$ tobermorite by the method of X-ray diffraction and selected area electron diffraction. Tobermorite was heat-treated at 40$0^{\circ}C$, 80$0^{\circ}C$ and 100$0^{\circ}C$ for investigation of transformation of morphology and structure. Electron micrographs showed the thin platy structure of synthetic tobermorite with a little of crumpled foil or fibrous semi-crystalline calcium silicate hydrates. No difference in structure was appeared under the temperature of 80$0^{\circ}C$ but tobermorite converted gradually into wollastonite at 800$^{\circ}$~85$0^{\circ}C$. On heating, moulded material from tobermorite hardly shrinks under 80$0^{\circ}C$.

• 대한디지털의료영상학회논문지
• /
• 제2권1호
• /
• pp.92-95
• /
• 1996

Computed Radiography(CR) is a relatively new technology that relies on an image plate(IP) as an alternate x-ray sensor to screen/film. Standard CR cassettes do not have lead foil behind the IP to control scatter radiation. The result of this study indicate that such control is needed. In most screen/film cassettes, that lines the rear of the cassette eliminates back scatter radiation. This study was performed to Investigate on the effects of back scatter in CR images by size of exposure field, distance between the CR cassette and the wall of radiography room. 1. It showed artifacts from hinges and clips located on the back of CR cassette by back scatter radiation. 2. The greater effects of back scatter radiation in CR images was attributed to the greater size of exposure field and the longer distance between the CR cassette and the wall of radiography room.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1422-1423
• /
• 2007

This study deals with various neural network algorithms for the on-site partial discharge pattern recognition. For the purpose, the pattern recognition has been carried out on partial discharge data for the typical artificial defect using 9 different neural network models. In order to enhance on-site applicability, artificial defects were installed in the insulation joint box of extra-high voltage xLPE cables and partial discharges were measured by use of the metal foil sensor and a HFCT as a sensor. As the result, it is found out that the accuracy of pattern recognition could be enhanced through the application of the Sigmoid function, the Momentum algorithm and the Genetic algorism on the artificial neural networks. Although Multilayer Perceptron (MLP) algorism showed the best result among 9 neural network algorisms, it is thought that more researches on others would be needed in consideration of on-site application.

• Journal of the Korean Physical Society
• /
• 제73권10호
• /
• pp.1546-1549
• /
• 2018

We have investigated core-levels of ZnO thin films at the interface with the graphene on Cu foil using in-situ X-ray Photoelectron Spectroscopy (XPS). Spectral evolution of C 1s, Zn 2p, and O 1s are observed in real time during RF sputtering deposition. We found binding energy (BE) shifts of Zn 2p and 'Zn-O' state of O 1s depending on ZnO film thickness. Core-levels BE shifts of ZnO will be discussed on the basis of electron transfer at the interface and it may have an important role in the electronic transport property of the ZnO/graphene-based electronic device.

• 대한화학회지
• /
• 제31권1호
• /
• pp.45-54
• /
• 1987

Calcon carboxylic acid[2-hydroxy-1-(2-hydroxy-4-sulfo-1-naphthylazo)-3-naphthoic acid;CCA)]를 이온교환시킨 Dowex 1-X8수지(CCA-Dowex 1-X8)와 2-methyl-8-hydroxyquinoline(MHQ)을 침윤시킨 Amberlite XAD-4 수지(MHQ-XAD-4)를 여러가지 매질중에 있는 철(Ⅲ)이온의 분리-농축에 사용하였다. 이들 수지의 안정성을 검토하고 철(Ⅲ)이온에 대한 흡착능을 측정하였다. 매트릭수의 주성분인 Al(Ⅲ), Ca(Ⅱ), 및 Fe(Ⅲ)들의 수지에 대한 흡착성을 pH를 변화시키며 조사하여 최적 pH범위를 결정하였다. 용리법으로 알루미늄호일과 초정약수중 미량의 철분을 매트릭스 이온으로부터 분리-농축하였다. 농축된 Fe(Ⅲ)는 소량의 강산으로 용리시켜 불꽃 원자흡광광도법으로 정량하였다. 초정약수중의 Fe(Ⅱ)와 Fe(Ⅲ) 이온들은 SP-Sephadex C-25컬럼으로 농축하고, ferrozine용액과 1% ascorbic acid-ferrozine용액으로 단계적 용리법에 의해 용리시킴으로써 각각을 분리할 수 있었다. 분리된 각 이온들은 Fe(Ⅲ)-ferrozine착물의 분석 파장인 562nm에서 분광 광도법으로 정량하였다.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.5-6
• /
• 2002

The new spectrometer for X-ray Induced Electron Emission Spectroscopy (XIEES) .has been recently developed in KRISS in collaboration with PTI (Russia). The spectrometer allows to perform research using the XAFS, SXAFS, XANES techniques (D.C.Koningsberger and R.Prins, 1988) as well as the number of techniques from XIEES field(L.A.Bakaleinikov et all, 1992). The experiments may be carried out with registration of transmitted through the sample x-rays (to investigate bulk samples) or/and total electron yield (TEY) from the sample surface that gives the high (down to several atomic mono-layers in soft x-ray region) near surface sensitivity. The combination of these methods together give the possibility to obtain a quantitative information on elemental composition, chemical state, atomic structure for powder samples and solids, including non-crystalline materials (the long range order is not required). The optical design of spectrometer is made according to Johannesson true focusing schematics and presented on the Fig.1. Five stepping motors are used to maintain the focusing condition during the photon energy scan (crystal angle, crystal position along rail, sample goniometer rail angle, sample goniometer position along rail and sample goniometer angle relatively of rail). All movements can be done independently and simultaneously that speeds up the setting of photon energy and allows the using of crystals with different Rowland radil. At present six curved crystals with different d-values and one flat synthetic multilayer are installed on revolver-type monochromator. This arrangement allows the wide range of x-rays from 100 eV up to 25 keV to be obtained. Another 4 stepping motors set exit slit width, sample angle, channeltron position and x-ray detector position. The differential pumping allows to unite vacuum chambers of spectrometer and x-ray generator avoiding the absorption of soft x-rays on Be foil of a window and in atmosphere. Another feature of vacuum system is separation of walls of vacuum chamber (which are deformed by the atmospheric pressure) from optical elements of spectrometer. This warrantees that the optical elements are precisely positioned. The detecting system of the spectrometer consists of two proportional counters, one scintillating detector and one channeltron detector. First proportional counter can be used as I/sub 0/-detector in transmission mode or by measuring the fluorescence from exit slit edge. The last installation can be used to measure the reference data (that is necessary in XANES measurements), in this case the reference sample is installed on slit knife edge. The second proportional counter measures the intensity of x-rays transmitted through the sample. The scintillating detector is used in the same way but on the air for the hard x-rays and for alignment purposes. Total electron yield from the sample is measured by channeltron. The spectrometer is fully controlled by special software that gives the high flexibility and reliability in carrying out of the experiments. Fig.2 and fig.3 present the typical XAFS spectra measured with spectrometer.

• 보존과학회지
• /
• 제37권6호
• /
• pp.670-678
• /
• 2021

<안성 청룡사 금동관음보살좌상>을 봉안하고 있는 청룡사(靑龍寺)는 경기도 안성시 서운면 서운산 자락에 있는 사찰이며, 대한불교조계종 제2교구 본사인 용주사의 말사이다. 안성 청룡사 금동관음보살좌상의 바닥면 XRF 분석 결과는 Cu-27.2 wt%, Sn-12.6 wt%, Pb-48 wt%이며, 과거 여러 전란으로 인해 소지금속 성분과 차이가 있을 것으로 예상된다. 불상의 내부를 확인하기 위해 감마선(γ-ray, Ir-192)으로 촬영하였으며, 파손된 배면 부분과 후대에 나무로 덧대어 수리한 위치를 확인하였다. γ-ray 촬영 결과와 XRF 분석을 이용하여 확인한 좌, 우의 수리 경계면은 허벅지 중간부터 목 아랫부분까지로 청동과 나무로 분리된다. 안성 청룡사 금동관음보살좌상의 금박 두께를 추정하기 위해 표준시료를 이용해 계산한 결과 얼굴과 가슴과 같은 육신 부분의 금박 두께가 20.7 ㎛와 21 ㎛로 가장 두꺼웠으며, 나무를 소지 재료로 한 부분이 평균 11.9 ㎛, 마지막으로 소지금속이 청동인 부분이 평균 7.4 ㎛로 금박 두께가 가장 얇음을 확인할 수 있었다.