• 제목/요약/키워드: X-Ray Projection

검색결과 143건 처리시간 0.024초

Virtual Monochromatic Image Quality from Dual-Layer Dual-Energy Computed Tomography for Detecting Brain Tumors

  • Shota Tanoue;Takeshi Nakaura;Yasunori Nagayama;Hiroyuki Uetani;Osamu Ikeda;Yasuyuki Yamashita
    • Korean Journal of Radiology
    • /
    • 제22권6호
    • /
    • pp.951-958
    • /
    • 2021
  • Objective: To evaluate the usefulness of virtual monochromatic images (VMIs) obtained using dual-layer dual-energy CT (DL-DECT) for evaluating brain tumors. Materials and Methods: This retrospective study included 32 patients with brain tumors who had undergone non-contrast head CT using DL-DECT. Among them, 15 had glioblastoma (GBM), 7 had malignant lymphoma, 5 had high-grade glioma other than GBM, 3 had low-grade glioma, and 2 had metastatic tumors. Conventional polychromatic images and VMIs (40-200 keV at 10 keV intervals) were generated. We compared CT attenuation, image noise, contrast, and contrast-to-noise ratio (CNR) between tumor and white matter (WM) or grey matter (GM) between VMIs showing the highest CNR (optimized VMI) and conventional CT images using the paired t test. Two radiologists subjectively assessed the contrast, margin, noise, artifact, and diagnostic confidence of optimized VMIs and conventional images on a 4-point scale. Results: The image noise of VMIs at all energy levels tested was significantly lower than that of conventional CT images (p < 0.05). The 40-keV VMIs yielded the best CNR. Furthermore, both contrast and CNR between the tumor and WM were significantly higher in the 40 keV images than in the conventional CT images (p < 0.001); however, the contrast and CNR between tumor and GM were not significantly different (p = 0.47 and p = 0.31, respectively). The subjective scores assigned to contrast, margin, and diagnostic confidence were significantly higher for 40 keV images than for conventional CT images (p < 0.01). Conclusion: In head CT for patients with brain tumors, compared with conventional CT images, 40 keV VMIs from DL-DECT yielded superior tumor contrast and diagnostic confidence, especially for brain tumors located in the WM.

Impact of the spatial orientation of the patient's head, metal artifact reduction, and tube current on cone-beam computed tomography artifact expression adjacent to a dental implant: A laboratory study using a simulated surgical guide

  • Matheus Barros-Costa;Julia Ramos Barros-Candido;Matheus Sampaio-Oliveira;Deborah Queiroz Freitas;Alexander Tadeu Sverzut;Matheus L Oliveira
    • Imaging Science in Dentistry
    • /
    • 제54권2호
    • /
    • pp.191-199
    • /
    • 2024
  • Purpose: The aim of this study was to evaluate image artifacts in the vicinity of dental implants in cone-beam computed tomography (CBCT) scans obtained with different spatial orientations, tube current levels, and metal artifact reduction algorithm (MAR) conditions. Materials and Methods: One dental implant and 2 tubes filled with a radiopaque solution were placed in the posterior region of a mandible using a surgical guide to ensure parallel alignment. CBCT scans were acquired with the mandible in 2 spatial orientations in relation to the X-ray projection plane (standard and modified) at 3 tube current levels: 5, 8, and 11 mA. CBCT scans were repeated without the implant and were reconstructed with and without MAR. The mean voxel and noise values of each tube were obtained and compared using multi-way analysis of variance and the Tukey test(α=0.05). Results: Mean voxel values were significantly higher and noise values were significantly lower in the modified orientation than in the standard orientation (P<0.05). MAR activation and tube current levels did not show significant differences in most cases of the modified spatial orientation and in the absence of the dental implant (P>0.05). Conclusion: Modifying the spatial orientation of the head increased brightness and reduced spatial orientation noise in adjacent regions of a dental implant, with no influence from the tube current level and MAR.

Sodium Sulfisoxazole Hexahydrate의 결정 및 분자구조와 수소결합에 관한 연구 (The Crystal and Molecular Structure of Sodium Sulfisoxazole hexahydrate)

  • 박영자;구정회
    • 대한화학회지
    • /
    • 제20권1호
    • /
    • pp.19-34
    • /
    • 1976
  • Sodium sulfisoxazole hexahydrate, $C_{11}H_{12}N_3O_3SNa{\cdot}6H_2O$의 결정 및 분자구조를 X-선 회절법으로 해명하였다. 이 화합물의 결정은 공간군 $P2_1/c$에 속하는 단사형으로 a = 15.68(3), b = 7.70(2), c = $17.94(4){\AA}$, ${\beta}$ = $118(2)^{\circ}$ and Z = 4이다. Weissenberg 사진 촬영으로 얻은 회절반점의 총수는 1717개이며 중원자법을 적용하여 구조해명을 한 후 최소 자승법으로 정밀화하였으며 최종 R값은 0.14이다. Benzene ring과 isoxazole ring은 평면구조를 가지며 서로 $60^{\circ}$의 각을 이루고 있다. 나트륨 원자는 다섯개의 물의 산소 원자들과 N(1)으로 만들어진 찌그러진 팔면체로 배위되어 있다. 분자들은 결정내에서 14개의 서로 다른 종류의 수소결합으로 결합되어 있다. 여섯종류의 $O-H{\cdots}O-H$, 세종류의 $O-H{\cdots}O,$ 두종류의 $O-H{\cdots}N$및 각각 한종류의 $N-H{\cdots}O,$ $O-H{\cdots}N$, $N-H{\cdots}O-H$ 수소결합들이며 그 길이는 2.71에서 $3.04{\AA}$까지이다.

  • PDF

필터보정역투영과 적절한 커널을 이용한 소아 저선량 안면 컴퓨터단층촬영의 시행 가능성 (Feasibility of Pediatric Low-Dose Facial CT Reconstructed with Filtered Back Projection Using Adequate Kernels)

  • 지혜;유선경;이정은;이소미;조현혜;엄준영
    • 대한영상의학회지
    • /
    • 제83권3호
    • /
    • pp.669-679
    • /
    • 2022
  • 목적 필터보정역투영(filtered back projection; 이하 FBP)법과 적절한 커널로 재구성된 소아 저선량 안면 컴퓨터단층촬영(이하 CT)의 시행 가능성을 평가하고자 한다. 대상과 방법 응급실에서 안면 CT를 촬영한 10세 이하 환자의 임상 및 영상 데이터를 후향적으로 검토하였다. 환자들을 두 그룹으로 나누었다: 고정된 80 kVp와 자동관전류변조기법을 사용하는 저선량 CT (low-dose CT, 그룹 A, n = 73), 고정된 120 kVp와 자동관전류변조기법을 사용하는 표준 선량 CT (standard-dose CT, 그룹 B, n = 40). 모든 영상은 FBP로 재구성되었다: 그룹 A는 뼈와 연조직 커널을, 그룹 B는 뼈 커널을 이용하였다. 두 그룹의 영상 잡음, 신호대잡음비(signal-to-noise ratio; 이하 SNR), 그리고 대조대잡음비(contrast-to-noise ratio; 이하 CNR)를 비교하였다. 두 명의 영상의학과 의사가 뼈와 연조직의 영상 품질에 대해 주관적으로 점수화하였다. 용적 CT 선량지수(CT dose index volume)와 선량길이곱(dose length product)을 기록하였다. 결과 영상 잡음은 그룹 A가 그룹 B보다 높았다(p < 0.001). 연조직 커널을 사용한 그룹 A 영상에서 가장 높은 SNR과 CNR을 보였다(p < 0.001). 뼈의 정성적 평가에서 뼈 커널 영상들을 비교하면 그룹 A가 그룹 B보다 비슷하거나 높은 점수를 보였다. 연조직의 정성적 평가에서 연조직 커널을 이용한 그룹 A와 뼈 커널에 연조직 창 설정을 이용한 그룹 B 사이에는 통계적으로 유의한 차이가 없었다(p > 0.05). 그룹 A는 그룹 B에 비해 방사선 선량이 76.9% 감소했다(3.2 ± 0.2 mGy vs. 13.9 ± 1.5 mGy, p < 0.001). 결론 연조직 커널 영상을 FBP로 재구성된 전통적인 CT에 추가함으로써 영상 품질을 유지하면서 소아 저선량 안면 CT 프로토콜을 사용할 수 있다.

경추부 전산화단층촬영에서 선속 경화 인공물을 최소화하기 위한 견부 강제 견인법에 대한 임상적 유용성 평가 (Evaluation of Clinical Availability for Shoulder Forced Traction Method to Minimize the Beam Hardening Artifact in Cervical-spine Computed Tomography (CT))

  • 김문정;조원진;강수연;이원석;박진우;유윤식;임인철;이재승;김현진;곽병준
    • 한국방사선학회논문지
    • /
    • 제7권1호
    • /
    • pp.37-44
    • /
    • 2013
  • 본 연구는 최근 자동노출제어장치에 의한 X선질 보정 및 다양한 수학적 보정 알고리즘 적용이 가능한 전산화단층촬영 장치를 이용하여 견부 강제 견인용 밴드의 사용 유 무에 따라 영상의 질과 환자의 편의성 및 안정성 측면에서 견부 강제 견인법에 대한 임상적 유용성을 제시하고자 하였다. 이를 위하여 경부 통증을 호소하는 환자 79명을 대상으로 견부 강제 견인용 밴드를 사용하기 전 후의 측면 투영 scout 영상과 횡단면 영상을 획득하여 횡단면 영상의 일정 크기의 관심영역 내의 화소 및 평균 HU 값을 비교하여 정량적 분석을 하였고 인공물과 해상도 및 분해능에 대한 임상 영상평가를 정성적으로 분석하였으며 환자가 느끼는 불편 정도를 자가 진단 설문 평가하였다. 결과적으로 측면 투영 scout 영상에서 견부 강제 견인용 밴드를 사용한 경우 묘출되는 경추의 수가 증가되었으나 횡단면 영상의 관심영역 내에서 견부 강제 견인용 밴드를 사용하기 전 후에 대한 화소 및 평균 HU 값의 변화는 거의 없는 것으로 판단되었으며 인공물과 해상도 및 대조도와 관련된 정성적 분석 결과에서 관찰자간 특이한 결과는 보이지 않았다. 따라서 견부 강제 견인용 밴드의 사용에 대한 자가 진단 설문 평가에서 환자의 82.27%는 불편함을 호소하였으며 정량적 및 정성적으로 영상의 질을 분석한 결과에서 사용에 따른 영상의학적 이점은 없는 것으로 판단되었다. 최근 다양한 수학적 보정 알고리즘에 의한 전처리 필터 과정의 적용과 더불어 절편 두께의 감소 및 자동노출제어장치 등에 의한 선질 보정 등이 가능한 전산화단층촬영 장치가 보급되면서 선속 경화에 의한 영상의 잡음은 문제가 되지 않을 것으로 판단되어 영상의 질에 영향을 주지 않으면서 환자에게 불편함을 주거나 추가적 위험성이 있는 견부 강제 견인용 밴드의 사용은 더 이상 임상적 유용성이 없는 것으로 판단되었다.

경추 정면 검사에서 방사선 입사각에 관한 연구 (A Study of Radiation Incidence Angle in Anteroposterior Cervical Vertebra Examination)

  • 정성운;임청환;한범희;정홍량;주영철;박미자
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제35권2호
    • /
    • pp.83-92
    • /
    • 2012
  • 경추 정면 방사선검사시 하악골, 후두골의 겹침방지, 경추 추체의 배열 및 관절의 형태 등을 관찰하기 위하여 X선 입사각을 머리 방향으로 $15{\sim}20^{\circ}$를 주고 있는 것이 보편적이다. 하지만 한국인의 체형에 맞는 입사각에 대한 연구는 거의 이루어지지 않고 있다. 이에 본 연구에서는 한국인에 적합한 입사각을 찾고, 방법을 제시하는데 목적이 있다. 입사각을 측정하기 위하여 서산에 위치한 S병원을 내원한 환자 1,044명을 대상으로 하였으며, 제 2번~제 5번 경추의 길이, 피사체-영상판 거리(OID), 제2번경추(axis)의경사도, 초점-영상판 간거리(FID)를 측정하였으며, 연령대 성별에 대한 평균값을 측정하여 적용공식에 의하여 입사각을 산출하였다. 경추 제2번~제5번의 평균길이는 6cm 이였으며, 10대부터 20대까지는 경추의 길이가 커지고 30대 이후로는 경추의 길이가 작아졌으며, 남성과 여성의 차이는 약 1cm 차이가 나타났다(p<.001). OFD는 연령대, 성별과 상관없이 거의 같은 값이 측정이 되었다. 제2번 경추(axis)의 경사도는 10대와 20대는 경사도가 증가하였지만, 30대 이후로는 작게 나타났다. 또한 남성과 여성은 약 $2^{\circ}$차이가 났다(p<.001). FID의 측정 결과, 연령대, 성별과 상관없이 거의 같은 값이 측정되었으며, 이 값으로 입사각을 측정한 결과, 10대는 $15.9^{\circ}$, 20대 $16.9^{\circ}$, 30대 $16.6^{\circ}$, 40대 $16.2^{\circ}$, 50대 $15.9^{\circ}$, 60대 $14.5^{\circ}$로 측정되었다. 10대와 20대까지 입사각이 증가하였지만, 30대 부터는 입사각이 작게 나타났다. 또한 10대는 남성과 여성이 같은 값으로 측정이 되었고, 20대부터는 남성과 여성이 $2^{\circ}$ 차이가 나타났다. 입사각과 제 2번~제 5번 경추의 길이측정, OID, 제 2번 경추의 경사도, FID와의 상관관계를 실시하였고, 입사각과 모두 유의한 상관관계가 나타났다(p<.001). 본 연구에서 경추의 평균 길이, OID, FID, 제2번 경추(axis)의 경사도에 따라서 입사각이 다르게 나타났고, 성별과 연령에 따라 입사각이 다른 것을 알 수 있었다. 그러므로 경추 정면검사 시 연령, 성별을 고려하여 입사각을 설정하면서 검사를 시행하여야 함이 사료되며, 향후 경추검사의 입사각을 설정할 때 참고 자료로 이용될 것으로 기대된다.

3D 프린팅 구조물을 이용한 자기주도 학습방법이 방사선학과 학생들에 미치는 교육 효과 (Educational Effects of Self-directed Learning Method Using 3D Printing Products on Radiological Science Students)

  • 성열훈
    • 한국방사선학회논문지
    • /
    • 제14권1호
    • /
    • pp.45-51
    • /
    • 2020
  • 본 연구에서는 방사선영상학 수업에서 3D 프린팅 해부학 구조물을 이용한 자기주도 학습이 교육 효과에 미치는 영향을 분석하고자 하였다. 대상은 4년제 대학교의 방사선학과 2학년의 32명(남자: 20명, 여자: 12명)으로 방사선영상학 교과목을 수강한 재학생들로서 소극적인 학생 그룹과 적극적인 학생 그룹으로 구분하였다. 학습방법은 3D 프린팅 해부학적 구조물을 이용한 자기주도 학습으로 진행했으며 학습 전·후로 정량적 학습개선효과를 평가하였다. 학생들의 정성적인 평가를 위해 수업의 흥미도, 만족도 그리고 학습효과(해부학 명칭 암기 용이성, X선 영상 해독력, 해부학 구조물 이해도, X선 촬영법 이해도)에 대해서 5점 리커트 5점 척도로 분석하였다. 그 결과 학습개선효과는 평균 65.4%가 향상되었으며 모든 학생들이 모든 변수에서 높은 점수를 얻었다 특히, 흥미도와 X선 영상 해독력을 제외한 모든 변수에서 소극적 학생그룹이 적극적인 학생그룹보다 높은 상관계수를 보였다. 이러한 결과는 3D 프린팅 해부학 구조물을 이용한 자기주도 학습이 방사선학과 학생들에게 긍정적인 교육효과를 기대할 수 있다.

모아레를 이용한 체형분석의 반복성 재현성에 관한 연구 (Study on the Repeatability and Reproductivity of a Moire Body Shape Analyser)

  • 이동엽;박영배;오환섭
    • 대한한의진단학회지
    • /
    • 제10권2호
    • /
    • pp.121-131
    • /
    • 2006
  • Background : As each human has a look in the face of oneself, he or she has a look of him or herself in the shape of the body also. And for the shape of the body which gives a big clue in diagnosis in musculoskeletal disorders. Therefor many means are used and developed for diagnosis through body shape or posture analysis for musculoskeletal disorders. X-ray, CT, MRI has been used for diagnosis through image in this way to tell about the inside of the human body. On the other side, moire topography was used for information about the exterior of the human body, but yet only minimal information such as the number of contour lines in each side was available. Therefor there were a few studies to use moire topography or other methods to get information about the surface of the human body in numeric values. The instrument used in this study which is a laser projection moire, is another trial to get numeric data about the surface of the human body. The instrument is composed of laser projector and a computer software to recompose and analyse the image data into depth, height, angle and length. Objectives : The study was focused on whether the instrument is reliable for clinic use, and to seek the proper environment and posture for the examination, and among the data the software provides, which items are more reliable and useful. Methods : For reproductivity and repeatability, 4 testers tested 2 persons. And to how if the body shape changes according to the posture and which posture gives the most reliable data, the test was performed in 6 different positions. Results : Result, the instrument showed sufficient repeatability and reproductivity for clinical use. And among the items the software provides, the length of the back, the angle of the back in the sagittal and coronal plane showed reliable results. And there was difference in the results according to the posture, and Therefor, in following studies using this instrument or similar type of posture analysing instruments, the length of the back, the angle of the back in the sagittal and coronal plane could be reliable item to use.

  • PDF

경추 사방향 검사에서 전후면과 후전면 자세에 따른 갑상선 표면선량 비교 (Comparison of the Surface Dose of the Thyroid according to AP versus PA Positioning in Cervical Spine Oblique View)

  • 박정호;양성규;김기정;주영철;홍동희;임우택
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제40권4호
    • /
    • pp.543-548
    • /
    • 2017
  • 경추 사방향 검사에서 전후면과 후전면 자세에 따른 갑상선 표면선량을 평가하여 검사 방법의 유용성을 알아보고자 하였다. 선량 측정은 Rando phantom을 이용하여 갑상선의 위치인 경추 4~5번에 선량계를 부착 시켜 측정하였다. 연구 결과, 전후면 사방향 자세와 후전면 사방향 자세의 표면선량 값은 kVp 변화에 따라 각각 $595.08{\pm}215.01{\mu}Gy$, $64.21{\pm}33.49{\mu}Gy$이었으며, mAs 변화에 따라 각각 $445.20{\pm}230.90{\mu}Gy$, $44.51{\pm}22.77{\mu}Gy$로 나타났다. 후전면 사방향 자세는 전후면 사방향 자세에 비해 갑상선이 받는 표면선량을 약 90% 감소시킬 수 있었으며, 각각의 비교에서 통계적으로 유의한 차이를 보였다(p<0.001). 따라서 방사선 감수성이 민감한 갑상선이 조사야 내에 포함된 경추검사에서는 환자의 표면선량을 줄이는데 후전면 사방향 자세가 유용할 것으로 판단된다.

소아용 두부 컴퓨터단층촬영에서 딥러닝 영상 재구성 적용: 영상 품질에 대한 고찰 (Adaptation of Deep Learning Image Reconstruction for Pediatric Head CT: A Focus on the Image Quality)

  • 이님;조현혜;이소미;유선경
    • 대한영상의학회지
    • /
    • 제84권1호
    • /
    • pp.240-252
    • /
    • 2023
  • 목적 소아 환자에서 두부 컴퓨터단층촬영(이하 CT)에 대한 딥러닝 이미지 재구성(deep learning image reconstruction; 이하 DLIR; TrueFidelity; GE Healthcare, Milwaukee, WI, USA)의 효과를 평가하고자 한다. 대상과 방법 총 126개의 소아 두부 CT 이미지를 수집했으며, adaptive statistical iterative reconstruction (이하 ASiR)-V를 사용한 반복적 재구성 및 세 가지 수준의 DLIR을 사용한 재구성을 시행하였다. 각 이미지 세트 그룹은 환자의 연령에 따라 4개의 그룹으로 구분하였으며 각 연령군의 임상 및 방사선량 관련 데이터를 검토하였다. 양적 매개 변수에는 signal to noise ratio (이하 SNR) 및 contrast to noise ratio (이하 CNR)가 포함되었으며 질적 매개 변수로 영상의 잡음(noise), 회백질의 구분 정도, 선명도, 인공물 및 수용 가능성(acceptability), 영상의 질감이 포함되었고 이에 대한 평가와 비교를 시행하였다. 결과 모든 연령 그룹의 모든 수준의 SNR 및 CNR은 높은 수준의 DLIR 사용 시 증가하였다. ASiR-V와 비교했을 때 높은 수준의 DLIR은 SNR 및 CNR이 개선되었다(p < 0.05). 그리고 DLIR의 수준이 증가될수록 순차적인 잡음 감소, 회백질 구분 개선, 선명도 개선이 나타났다. 이러한 변수들에서 높은 수준의 DLIR 사용 시 ASiR-V와 유사한 정도의 수치가 측정되었다. 인공물과 수용 가능성의 경우에 적용된 DLIR 수준 간에 큰 차이를 보이지 않았다. 결론 소아 두부 CT에 고수준 DLIR을 적용하면 영상의 노이즈를 줄일 수 있으나 인공물 처리에 대한 개선이 필요하다.