• Journal of the Korean Ceramic Society
• /
• v.41 no.9
• /
• pp.677-683
• /
• 2004

Nd:LLM (Nd:LiLa(MoO$_4$)$_2$) single crystals for the laser host material were grown by the Czochralski method. The Nd:LLM grown single crystals cracked easily, and the reasons of cracks are generally related with phase transition, incongruent melting, chemical heterogeneity of composition, geometric thermal structures of imbalance and growth direction. We confirmed that phase transition is not observed by TG-DTA thermal analysis, and the XRD analysis revealed congruent melting in our products. It was confirmed that the volatilization of Li$_2$O composition is the important reason of chemical heterogeneity. The geometric thermal profile of the resistance furnace of our own design was controlled with a crucible height. Also, Nd:LLM crystal affected growth direction, and was the best quality in case of (101) growth direction. The distribution and effective distribution coefficient of Nd$^{3+}$ ion were accomplished by PIXE analysis.s.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9A
• /
• pp.931-939
• /
• 2007

This paper describes the system which automatically generates instruction-set simulators cores using the SMDL. SMDL describes structure and instruction-set information of a target DSP machine. Analyzing behavioral information of each pipeline stage of all instructions on a target ASIPS, the proposed system automatically generates a cycle-accurate instruction set simulator in C++ for a target processor. The proposed system has been tested by generating instruction-set simulators for ARM9E-S, ADSP-TS20x, and TMS320C2x architectures. Experiments were performed by checking the functions of the $4{\times}4$ matrix multiplication, 16-bit IIR filter, 32-bit multiplication, and the FFT using the generated simulators. Experimental results show the functional accuracy of the generated simulators.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.7
• /
• pp.961-969
• /
• 2004

Most manufacturing companies are trying to develop a competitive product by increasing the quality, shortening time to market and reducing the cost of a product. Collaborators related to the development of a new product want to confirm geometric forms and dimensions during the design process, as well as to verify dimensional errors of a product during the fabrication process. Objective of this paper is the development of a collaborative design and dimension verification system on the Internet. STEP files obtained from the design process are used for the design and dimension verification. Functions of the design and dimension verification modules are constructed over the ActiveX control using the visual C/sup ++/ and OpenGL. By using mark up functions over the Internet, collaborators check geometries, interferences, dimensional errors, human factors and form errors, as well as share their design ideas and opinions with XML rapidly and remotely. The usefulness of the developed system is confirmed through case studies.

• Journal of Internet Computing and Services
• /
• v.2 no.4
• /
• pp.25-32
• /
• 2001

The CAD tools for ASIC design, which are already developed or will be developed in the future, have their own functions and different working environments in many cases. Therefore, it would be more effective in achieving the final design goal, if we have a system called CAD framework in which these CAD tools are systematically integrated. In this paper, we introduce same novel techniques for integrating systematically such the CAD tools, which are usually developed under UNIX shell environments, into the CAD framework with the standard graphics interface such as X-windows. Some meta languages and script file formats are developed for flexible specification of the system MENU hierarchy and the data dependencies among executable programs. We integrated two existing CAD tools into our CAD framework using the techniques and find out the integrated protype system is working well under the new system environments.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.10 s.241
• /
• pp.1353-1360
• /
• 2005

Injection-molded products serve a wide range of applications in our modem lives and their significance is ever increasing. However, difficulty of communication among related companies under the present system results in increase of lead time and decrease of production efficiency. The objective of this paper is the development of a web-based draft verification system in mold design processes. Although several commercial CAD systems offer draft verification functions, those systems are very expensive and inadequate to perform collaborative works. For collaborative work under the distributed environment, the proposed system uses native file transforming of CAD data into optimal format by using the ACIS kernel and InterOp. Functions of draft verification modules are constructed over the ActiveX control using the visual C++ and OpenGL. Therefore, collaborators related to the development of a new product are able to verify the draft and undercut over the Internet without commercial CAD systems. The system helps to reduce production cost, errors and lead-time to the market. Performance of the system is confirmed through various case studies.

• Clean Technology
• /
• v.23 no.1
• /
• pp.80-89
• /
• 2017

The bubbling fluidized bed (BFB) reactor with a diameter of 0.1 m and a height of 1.2 m was used for experimental study of co-firing and emission characteristics fueled by sewage sludge (SS) and wood pellet (WP). The facility consists of a fluidized bed reactor, feeding system, cyclone, condenser and gas analyzer, The mean particle diameter and minimum fluidization velocity are $460{\mu}m$ and $0.21ms^{-1}$ respectively. SS produced from Korea and WP from Canada were examined. The various mixing ratios of WP were 20, 50, and 80% based on HHV. The equivalence ratio of 1.65, reactor temperature of $800^{\circ}C$, air flow rate of $100Lmin^{-1}$, and fluidization number of 4 were fixed in the BFB experiment. In TGA, the range of combustion temperature of SS was wider than that of WP. It represents that the combustibility of WP is higher than that of SS. The BFB reactor temperature was maintained between 800 and $900^{\circ}C$. CO emission of SS was high because of lower combustibility. $NO_X$ and $SO_X$ formation of SS were higher than that of WP since high nitrogen and sulfur contents of SS. CO, $NO_X$, and $SO_X$ formation were suppressed as the mixing ratio of WP was increased. The slagging and fouling tendencies show high in all test conditions.

• Journal of the Korean Society of Radiology
• /
• v.17 no.6
• /
• pp.865-872
• /
• 2023

The purpose of this study was to analyze fabrics suitable for use as examination gowns to determine whether examination gowns affect imaging during anterior to posterior chest examinations(Chest AP) on a digital X-ray system. Examination gowns in use at five medical centers in Seoul were collected and included modal, tencel, cotton, and rayon fabrics. The selection of fabrics was based on studies that reported fabrics with good tactile, absorbent, stretchable, and wrinkle resistance. Phantoms of five hospital gowns and four fabrics, arranged in overlapping layers from one to eight, were created and examined on a digital X-ray system in both Chest AP examination. The images examined were subjected to a first-step profile analysis, a second-step signal intensity averaging analysis, and a third-step microscopic analysis. The results showed that all nine materials had an increasing impact on the image as the number of layers of fabric increased, with the modal fabric having the least impact on the image in the first, second, and third analyses. In conclusion, as the resolution of digital x-ray systems increases, the impact of examination clothing on the image will increase, and research to find suitable materials for examination clothing will continue to be necessary.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.530-532
• /
• 1998

본 연구에서는 안전한 네이밍 서비스를 제공하는 기존 Secure DNS를 확장시켜 GUI방식의 관리자 인터페이스를 설계하였다. 따라서 시스템 설정에 대한 configuration과 보안관련 도구의 핵심이라 할 수 있는 로그의 관리가 용이해 졌다. 또한 관리자 인터페이스에 의해 각각의 자원 레코드에 대한 자동적인 삽입, 삭제가 가능하며, 암호화 알고리즘의 추가를 interactive하게 처리한다. 그밖에 기존 Secure DNS에서는 새로운 암호와 알고리즘을 추가할 때마다 재 컴파일 해야하는 단점이 있다. 이를 해결하기 위해 'Dynamic link interface'를 설계하였다. 이는 암호화 알고리즘의 입출력 표준을 정하고 이를 단일한 시스템 API로 구성하여 Secure DNS가 초기화 될 때 동적 라이브러리를 사용하여 각각의 암호화 알고리즘을 메모리에 적재하는 방식을 택한다. 그 밖에 Secure DNS를 이용하여 제공할 수 있는 응용방안으로 개인의 공개키 분배서비스와 X.509 체계를 이용한 인증서를 제공하는 서비스를 제안한다. 따라서 본 연구에서는 인터넷의 기본 인프라스트럭쳐인 DNS를 최대한 활용할 수 있는 여러 가지 방안과 그 해결책을 제시한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.12
• /
• pp.154-159
• /
• 2004

This study is aimed to diminish the errors which created during transforming from 3D shape created with CAD program to STL file formation. The length strain which created on X-Y axises at STL file transforming is diminished by using the relation between common shape error and shrinkage rate. As the result of study, we have confirmed the length strain in accordance with facetres value. Also, the shape error is compensated with shrinkage rate by error of length strain. so, we could diminish to shape error by several tens micrometer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.4B
• /
• pp.491-504
• /
• 2001

본 논문은 고정된 카메라를 통해 들어오는 도로연상에서 추적되는 다중 차량들의 겹침(occlusion)발생시 칼만 필터와 차량의 특징정보를 이용하여 개별 차량을 분할하고 추적 가능한 시스템을 제안하고 구현하였다. 다중 차량을 추적할 시 가장 큰 문제점이 되고 있는 차량 겹침을 해결하기 위해 카메라와의 거리를 이용하여 해결하는 방법 3D 모델을 이용하여 해결하는 방법, 겹침 추론 등 차량 겹침을 해결하기 위한 여러 가지 방법들이 제시되고 있다. 그러나 영상에 연속적으로 나타나는 다중 차량의 겹침을 단일 차량으로 인식할 수 는 단점이 있다. 따라서 칼만 필터와 차량의 특징 정보로서 차량의 높이와 넓이의 비, 추적에 사용되는 박스에서 차량과 여백의 비를 이용함으로서 연속적으로 나타날 수 있는 차량 겹침을 분할하고 추적 가능하게 하는 시스템을 구현하고 실험하였다. 본 시스템에서는 256X 256의 크기로 15 frames/sec로 저장된 AVI 파일 형식의 동영상을 사용하여 실험에 이용하였으며, 시내 도로에서의 차량들의 실험 결과 기존의 방법 보다 차량 특징 정보를 이용한 방법이 연속적 겹침에 대한 처리에 우수함을 보였다.