• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.4
• /
• pp.322-327
• /
• 2006

CdS films have been prepared on polycarbonate, polyethylene terephthalate, and Coming 7059 substrates by r.f magnetron sputtering technique at room temperature. A comparison of the properties of the films deposited on polymer and glass substrates was performed. In addition, the influence of the sputter power on the structural and optical properties of these films was evaluated. The XRD measurements revealed that CdS films were polycrystalline and retained the mixed structure of hexagonal wurtzite and cubic phase, regardless of substrate types. As the sputter power was increased from 75 to 150 Watt, the structure of CdS films was converted from the mixed of hexagonal and cubic phase to hexagonal phase. The morphology of CdS films is found to be continuous and dense. Also, the grain of CdS films is larger with increasing the sputter power. The average transmittance exceeded 80 % in the visible spectrum for all films and decreases slightly with the sputter power.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.126-130
• /
• 1995

$CdS_{1-x}Te_{1-x}$ polycrystalline thin films were fabricated from CdS and CdTe powder by co-evaporation method at $10^{-6}$ Torr. The Optimum evaporation condition was substrate temperature $T_{s}$=$150^{\circ}C$, evaporation time t=30 min. XRD spectrums indicated that the crystal structure chanced from zinc blonde (x$\leq$0.22) to wurtzite (x$\geq$0.96) through mixed structure (0.22$\leq$0.74) as composition value x increase to CdS. Conductive type was n-type by hot point probe method. van der Pauw method was not applicable for x<0,5 due to high hall voltages, Electrical resistivity and Hall carrier mobility were decreased as x increase, while Hall carrier concentration was increased. The optical bandgap of $CdS_{1-x}Te_{1-x}$ polycrystalline thin films measure d at R.T. had quardratic form and the bowing parameter was fitted as 1.98eV for theoretical value of 2.0eV. I-V characteristics of In/CdTe/$CdS_{x}Te_{1-x}$Au Schottky diodes showed that CdS-rich one had better forward characteristics than CdTe-rich one.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1645-1647
• /
• 1996

Polycrystalline CdTe thin films -have been studied for photovoltaic application because of their high absorption coefficient and optimal band gap energy (1.54 eV) for solar energy conversion. In this study, we prepared CdTe films using RF-magnetron sputtering method and investigated structural, optical and electrical properties with spectrophotometer, XRD, EDX, and resistivity meter. CdTe films at $200\;^{\circ}C$ showed a mixture of zinc blend (Cubic) and wurtzite (hexagonal) phase. On the other hand, the films at $400\;^{\circ}C$ showed highly oriented structure having hexagonal structure. The resistivity of CdTe films deposited on $SiO_2$ substrates was about $10_7\;{\Omega}cm$. The value of resistivity decreased with the increase of the substrate temperature. CdTe were sputtered on CdS thin films prepared by chemical bath deposition for the formation of the heterojunction. I-V characteristics of these cells were measured at a light density of $100mw/cm^2$, AM. 1.0. The present thin film solar cells showed a conversion efficiency of about 5%.

• Applied Science and Convergence Technology
• /
• v.23 no.6
• /
• pp.376-386
• /
• 2014

Zinc oxysulfide nanocrystals (ZnOS NCs) were synthesized by forming ZnS phase on a ZnO matrix. ZnO nanocrystals (NCs) with a diameter of 10 nm were synthesized by forced hydrolysis in an organic solvent. As-synthesized ZnO NCs aggregated with each other due to the high surface energy. As acetic acid (AA) was added into the milky suspension of the aggregated ZnO NCs, transparent solution of well dispersed ZnO NCs formed. Finally ZnOS NCs were formed by adding thioacetic acid (TAA) to the transparent solution. The effect of recrystallization on the structural, optical and electrical properties of the ZnOS NCs were studied. The results of UV-vis absorption confirmed the band gap tunability caused by increasing the curing temperature of ZnOS thin films. This may have originated from the larger effective size due to the recrystallization of zinc sulfide (ZnS). From XRD result we identified that ZnOS thin films have a zinc blende crystal structure of ZnS without wurtzite ZnO structure. This is probably due to the small amount of ZnO phases. These assertions were verified through EDS of FE-SEM, XPS and EDS mapping of HR-TEM results; we clearly proved that ZnOS were comprised of ZnS and ZnO phases.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.415-415
• /
• 2012

ZnO nanostructures were synthesized by a vapor phase transport process in a single-zone furnace within a horizontal quartz tube with an inner diameter of 38 mm and a length of 485 mm. The ZnO nanostructures were grown on Au-catalyzed Si(100) substrates by using a mixture of zinc oxide and graphite powders. The growth of ZnO nanostructures was conducted at $800^{\circ}C$ for 30 min. High-purity Ar and $O_2$ gases were pushed through the quartz tube during the process at a flow rate of 100 and 10 sccm, respectively. The sequence of ON/OFF cycles of the Ar gas flow was repeated, while the $O_2$ flow is kept constant during the growth time. The Ar gas flow was ON for 1 min/cycle and that was OFF for 2 min/cycle. The structure and optical properties of the ZnO nanostructures were investigated by field-emission scanning electron microscope, X-ray diffraction, temperature-dependent photoluminescence. The preferred orientation of the ZnO nanostructures was along c-axis with hexagonal wurtzite structure.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.247-247
• /
• 2011

플라즈마 분자선 에피택시(plasma-assisted molecular beam epitaxy)법을 이용하여 다공질 실리콘(porous silicon)에 ZnO 박막을 성장하였다. 성장 후, 아르곤 분위기에서 10분 간 다양한 온도(500~700$^{\circ}C$)로 열처리하였다. 다공질 실리콘 및 열처리 온도가 ZnO 박막의 특성에 미치는 영향을 scanning electron microscopy (SEM), X-ray diffraction (XRD), photoluminescence (PL)을 이용하여 분석하였다. 실리콘 기판에 성장된 ZnO 박막은 일반적은 섬구조(island structure)로 성장된 반면, 다공질 실리콘에 성장된 ZnO 박막은 산맥과 같은 구조(mountain range-like structure)로 성장되었다. 열처리 온도가 증가함에 따라 ZnO 박막의 grain size는 증가하였다. 실리콘 기판 위에 성장된 ZnO 박막은 wurtzite 구조를 나타내는 여러 개의 회절 피크가 관찰된 반면, 다공질 실리콘에 성장된 ZnO 박막은 c-축 배향성(c-axis preferred orientation)을 나타내는 ZnO (002) 회절 피크만이 나타났다. 다공질 실리콘에 성장된 ZnO 박막의 구조적 및 광학적 특성이 실리콘 기판에 성장된 ZnO 박막의 특성보다 우수하게 나타났다. 뿐만 아니라, 열처리 온도가 증가함에 따라 다공질 실리콘에 성장된 ZnO 박막의 PL 강도비(intensity ratio)가 실리콘 기판에 성장된 ZnO 박막의 강도비보다 월등하게 증가하였다.

• Journal of Powder Materials
• /
• v.23 no.4
• /
• pp.270-275
• /
• 2016

We report on an all-solution-processed hydrothermal method to control the morphology of ZnO nanostructures on Si substrates from three-dimensional hemispherical structures to two-dimensional thin film layers, by controlling the seed layer and the molar contents of surfactants during their primary growth. The size and the density of the seed layer, which is composed of ZnO nanodots, change with variation in the solute concentration. The ZnO nanodots act as heterogeneous nucleation sites for the main ZnO nanostructures. When the seed layer concentration is increased, the ZnO nanostructures change from a hemispherical shape to a thin film structure, formed by densely packed ZnO hemispheres. In addition, the morphology of the ZnO layer is systematically controlled by using trisodium citrate, which acts as a surfactant to enhance the lateral growth of ZnO crystals rather than a preferential one-dimensional growth along the c-direction. X-ray diffraction and energy dispersive X-ray spectroscopy results reveal that the ZnO structure is wurtzite and did not incorporate any impurities from the surfactants used in this study.

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.3
• /
• pp.243-250
• /
• 2018

Zinc oxide (ZnO) nanorods were grown on a palladium (Pd) activated polyacrylonitrile (PAN) fiber where Pd activation was carried out in advance by the following dry process: palladium(II) bis(acetylacetonate), $Pd(acac)_2$ was sublimed, penetrated into the surface of PAN fiber and spontaneously reduced to Pd nanoparticles at $180^{\circ}C$ for various times under a nitrogen atmosphere. ZnO nanorod morphology was observed by a scanning electron microscopy (SEM) and the elemental composition was confirmed by energy-dispersive X-ray spectroscopy (EDS). The crystalline structure of ZnO nanorods was analyzed by X-ray diffraction (XRD) analysis showing Wurtzite structure consisting of hexagonal lattice. Sulfur removal characteristics were evaluated.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.4
• /
• pp.169-173
• /
• 2011

In this study, Al-N codoped p-type zinc oxide (ZnO) thin films were deposited on Si and homo-buffer layer templates in a mixture of $N_2$ and $O_2$ gas with ceramic ZnO:(2 wt% $Al_2O_3$) as a sputtering target using DC- magnetron sputtering. X-ray diffraction spectra of two-theta diffraction showed that all films have a predominant (002) peak of ZnO Wurtzite structure. As the $N_2$ fraction in the mixed $N_2$ and $O_2$ gases increased, field emission secondary electron microscopy revealed that the surface appearance of codoped films on Si varied from smooth to textured structure. The p-type ZnO thin films showed carrier concentration in the range of $1.5{\times}10^{15}-2.93{\times}10^{17}\;cm^{-3}$, resistivity in the range of 131.2-2.864 ${\Omega}cm$, and mobility in the range of $3.99-31.6\;cm^2V^{-1}s^{-1}$ respectively.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.2
• /
• pp.1-6
• /
• 2010

Star-like ZnO nanostructures were grown on SI(100) substrates with carbon(C) catalyst by employing vapor-solid(VS) mechanism. The morphologies and structure of ZnO nanostructures were investigated by Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD) and Raman spectrum, Photoluminescence spectrum. The results demonstrated that the as-synthesized products consisted of star-like ZnO nanostructure with hexagonal wurtzite phase. Nanostructures grown at 1100 were mainly star-like in structure with diameters of 500 nm. The legs of the star-like nanostructures were preferentially grown up along the [0001] direction. A vapor.solid (VS) growth mechanism was proposed to explain the formation of the star-like structures. Photoluminescence spectrum exhibited a narrow emission band peak around 380 nm and a broad one around 491 nm. Raman spectrum of the ZnO nanostructures showed oxygen defects in ZnO nanostructures due to the existence of Ar gas during the growth process, leading to the dominant green band peak in the PL spectrum.