• Journal of the Korean Applied Science and Technology
• /
• v.37 no.6
• /
• pp.1798-1805
• /
• 2020

This study attempted to numerically verify specific effects on skin condition improvement by measuring and comparing changes in skin conditions such as pores, wrinkles, and sebum of LED masks for beauty devices with low output among light sources. 18 healthy women (4 weeks in the control group and 4 weeks in the experimental group) were conducted once a week for 8 weeks. As a result of measuring the skin condition of pores, wrinkles, and sebum, it was confirmed that the skin condition improved significantly as the LED irradiation progressed, and the difference between the groups by measurement period of the experimental group and the control group also showed significant differences in pores, wrinkles, and sebum (p< .001, p<.05). This is meaningful in that it can be presented as clinical information and quantitative data by preparing continuous data in an academic sense by proving the effect of improving the LED mask as a beauty device. It is also suggested that in the future, follow-up studies to prove more effective skin improvement will be conducted.

• The Research Journal of the Costume Culture
• /
• v.30 no.3
• /
• pp.429-443
• /
• 2022

The purpose of this study is to verify how similar the virtual fit pants are to the actual fit of stretchable pants. Data is produced using a virtual model to apply movements. The results show that in the upright position, the similarity between the appearance of the actual fit and the virtual fit is high. Results are 4.47, 4.13 and 4.33 out of 5 on the front, side, and back, respectively. The base line of the front and back, and the amount of allowance in each part were well reproduced by the model. The texture of the virtual fit was evaluated and found to be similar to the actual fabric. In terms of shape and number of wrinkles with the virtual fit pants, large wrinkles were better expressed than fine wrinkles. After applying movements to the virtual model, the front and side results were similar to the actual fit, but the back results were different. As a result of multiple comparisons, the greatest difference in similarity by movements is found in the center front line. The similarity difference was lower on the side than on the front. The only significant difference after applying movements is in the hip circumference margin. According to movements, the similarity of virtual fit is lower on the back than on the front and side, and the back also has the largest similarity differences to the movements type.

• Tribology and Lubricants
• /
• v.38 no.6
• /
• pp.235-240
• /
• 2022

Atomically-thin 2D nanomaterials can be easily deformed and have surface corrugations which can influence the frictional characteristics of the 2D nanomaterials. Chemical vapor deposition (CVD) graphene can be grown in a wafer scale, which is suitable as a large-area surface coating film. The CVD growth involves cooling process to room temperature, and the thermal expansion coefficients mismatch between graphene and the metallic substrate induces a compressive strain in graphene, resulting in the surface corrugations such as wrinkles and atomic ripples. Such corrugations can induce the friction anisotropy of graphene, and therefore, accurate imaging of the surface corrugation is significant for better understanding about the friction anisotropy of CVD graphene. In this work, the combinatorial analysis using friction force microscopy (FFM) and transverse shear microscopy (TSM) was implemented to unveil the friction anisotropy of CVD bi-layer graphene. The periodic friction anisotropy of the wrinkles was measured following a sinusoidal curve depending on the angles between the wrinkles and the scanning tip, and the two domains were observed to have the different friction signals due to the different directions of the atomic ripples, which was confirmed by the high-resolution FFM and TSM imaging. In addition, we revealed that the atomic ripples can be easily suppressed by ironing the surface during AFM scans with an appropriate normal force. This work demonstrates that the friction anisotropy of CVD bilayer graphene is well-correlated with the corrugated structures and the local friction anisotropy induced by the atomic ripples can be controllably removed by simple AFM scans.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.4
• /
• pp.367-375
• /
• 2016

In this study, the skin-improving effect was investigated through the oral intake of DuOligo (51.67% lactulose and 15.8% galactooligosaccharides). Thirty seven healthy women (40~60 in ages) were divided into placebo group (dextrin) and treatment group (DuOligo group), and each group was given a sample for oral intake for 8 weeks. After that, corneometer value, transepidermal water loss (TEWL), melanin index, erythema index, and wrinkle index were measured. As a result, moisture content of DuOligo group increased 38.22% than control group after 8 weeks significantly (p < 0.01). The TEWL of control group decreased by $3.39g/h/m^2$ after 8 weeks but the TEWL of DuOligo group decreased by $5.32g/h/m^2$ after 8 weeks. The melanin index of the control group was significantly increased with times, but the melanin index of the DuOligo group did not show any significant difference with times. The total wrinkles, length of total wrinkles, number of wrinkles, and depth of wrinkles significantly decreased (p < 0.05) compared to the control group. These results suggested that the applicability of DuOligo as a skin improving functional material was confirmed.

• Journal of KIISE:Software and Applications
• /
• v.32 no.3
• /
• pp.181-191
• /
• 2005

This article describes a simplified mathematical model and the relevant numerical algorithm to simulate the draped cloth on virtual human body. The proposed algorithm incorporates an elliptical, or non-consecutive, method to simulate the cloth wrinkles on moving bodies without resorting to the result of the past time-steps of drape simulation. A global-local analysis technique was employed to decompose the drape of cloths into the global deformation and the local wrinkles that will be superposed linearly The global deformation is determined directly by the rotation and the translation of body parts to generate a wrinkle-free yet globally deformed shape of cloth. The local wrinkles are calculated by solving simple elliptical equations based on the orthogonality between conjugate harmonic functions representing the wrinkle amplitude and the direction of wrinkles. The proposed method requires no interpolative time frames even for discontinuous body postures. Standing away from the incremental approach of time integration in conventional methods, the proposed method yields a remarkable reduction of CPU time and an enhanced stability. Also, the transient motion of cloth could be achieved by interpolating between the deformations corresponding to each static posture.

• Applied Microscopy
• /
• v.41 no.2
• /
• pp.129-137
• /
• 2011

The aim of this study was to evaluate the inhibitory effect of nude pack containing black tea water extract (NPBT) on skin wrinkle formation in hairless mice. Skin wrinkles were induced by UVB irradiation to the backs of hairless mice for 5 weeks. And at the same time, NPBT was applied topically. Wrinkle formation, histological changes, expression of matrix metalloproteinase-3 (MMP-3) and protein activities of MMP-2 and MMP-9 were observed or analyzed. Wrinkles for the control group were formed as a pattern of deep furrows and thick crests. Whereas wrinkles for the NPBT treated group were formed as a pattern of shallow furrows and thin crests, and their wrinkle areas were significantly (p<0.001) lower than the control group. Collagen fibers were arranged irregularly and sparse in density and some elastic fibers were degenerated in the control group, while they were almost intact in the NPBT treated group. MMP-3 mRNA expression in the control group was significantly (p<0.001) higher than the normal group, and that of NPBT treated group was significantly (p<0.001) lower than the control group. The NPBT treated group showed remarkably lower protein activities of MMP-2 and MMP-9 than the control group. NPBT could have a considerable inhibitory effect on skin wrinkle formation in hairless mice.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.619-620
• /
• 2013

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.8
• /
• pp.920-926
• /
• 2012

Wrinkling is a common phenomenon in nature and the shape of a wrinkle can be defined using characteristic dimensions such as pitch, length, amplitude, and density etc. Wrinkle structure can be utilized in various research fields, and especially it has special characteristics when it used in applications of heat transfer; a wrinkly surface has the effect to promote turbulent flow and increasing surface area. However, the generation of wrinkle structures in somewhat regular is not easy. Till now, there are some research works focused on realization of wrinkles in micro scale. However, most of the processes generally requires high precision equipments and high costs, and also there is a limitation to generate the wrinkles in a large area. In this study, we propose a novel method named as a RCO (repetitive contact-and-open) process to fabricate wrinkle structure with low cost and relative easy way. Using the RCO, we fabricated micro-corrugate structures successfully. From the experimental results, we found out the process parameters of RCO, and showed the possibility of RCO to be used in real applications.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.2
• /
• pp.55-63
• /
• 2014

Fractures and wrinkles are two major defects frequently found in the sheet metal forming process. The process has several noise factors that cannot be ignored when determining the optimal process conditions. Therefore, without any countermeasures against noise, attempts to reduce defects through optimal design methods have often led to failure. In this study, a new and robust design methodology that can reduce the possibility of formation of fractures and wrinkles is presented using decision-making theory. A two-attribute value function is presented to form the design metric for the sheet metal forming process. A modified complex method is adopted to isolate the optimal robust design variables. One of the major limitations of the traditional robust design methodology, which is based on an orthogonal array experiment, is that the values of the optimal design variables have to coincide with one of the experimental levels. As this restriction is eliminated in the complex method, a better solution can be expected. The procedure of the proposed method is illustrated through a robust design of the sheet metal forming process of a side member of an automobile body.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.27 no.1
• /
• pp.83-98
• /
• 2001

Inositol, is a water-soluble crystalline compound. It helps with people’s metabolism and decreases cholesterol levels. It is also known to have anti-cancer results. In order to find out the affects of Inositol on the skin, Inositol skin lotion was produced with each amount of Inisitol: 0, 0.5, 1.0, 2.0, 3.0 wt% and tested on the faces and the arm areas of women in all ages for 7 weeks. The moisture, sebum, change in elasticity, and improvement of wrinkles were measured. Corneometer, Sebumeter, Cutometer, and an image analyzer were used as measuring equipments. There are subtle differences in the subjects when 1-2% of Inositol is used the moisture of the skin improved 19%, elasticity by 17%, and the amount of sebum for dry and oily skin types adjusted to the amount of sebum of the neutral skin types. This influenced the length, width, the number of peak, and the height of the wrinkles to improve 12.4%. It is thought that Inositol would be an effective new raw material in cosmetics.