• Tunnel and Underground Space
• /
• v.6 no.3
• /
• pp.260-266
• /
• 1996

Safety concern is one of the most important parameters in the design of explosive building demolition. Laboratory experiments were performed to investigate the failure behaviour of concrete columns and the effects of protection materials. Fourteen reinforced columns with two sizes were constructed and the effects of protection materials were tested for two kinds of materials: non woven fabrics and wire net. The results showed that control of gas effects is a key to the control of flying chips. It was recommended to use both wire net and non woven fabrics as primary and secondary protection materials. Such protection method was successfully applied to the explosive demolition of 16 and 17-strory apartment buildings.and the results of a simulation on a model tunneling workings using diesel equipments are introduced. In case of typical model of tunneling face, the gas concentration of human height is about one third of roof concentration and right side half of the tunnel shows better environment than left half. NOx concentration of workings can be estimated about 0.45ppm which is much lower than permissible level(5 ppm).

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.828-837
• /
• 2006

Geotextiles consist of three major types of geosynthetic material (woven, non-woven and composite) and the functions of geotextiles are separation, reinforcement, filtration, drainage and as a moisture barrier. Although the many research scholar and engineer developed and established the design criteria and construction methodology, sustainable research still needed for optimum design methodology to the complicate field conditions. In this study, in-situ rainfall test performed to develop suitable filter system for sea dyke upper slope filter layer. In-situ rainfall test conducted for seven different filter system and measured the infiltration flux and pore pressure at various filter layer. Based on the test results, the double layered geotextile filter and sand transition system is most suitable for sea dyke upper filter layer because which system is effective for drainage of infiltration flow and minimize the deformation of sea dyke cover stone.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.12 no.3
• /
• pp.57-71
• /
• 2010

This study is to understand the actual condition of design and material of peanut-shaped diaper with looking at the types and characteristics of baby cloth diapers and domestic peanut-shaped diapers registered in the Patent Office. Furthermore, it is to suggest the basic data for designing more functional and comfortable cloth diapers. Here are the research result on the actual condition of design and material of baby cloth diapers. Firstly, 11 cloth diapers registered in the Patent Office can be divided into panty-shaped and straight line-shaped diapers. There are 7 kinds of panty-shaped cloth diapers which satisfy both the convenience of a disposable diaper and sanitation of a cloth diaper, and 4 kinds of straight line-shaped cloth diapers that minimize the weaknesses of existing cloth diapers. Secondly, domestic peanut-shaped cloth diapers can be divided into peanut-shaped, inserted, winged, velcro-attached diapers. Among 23 kinds of peanut-shaped cloth diapers from 16 companies, there are 12 kinds of peanut-shaped diapers which consist of layers of cloth to make peanut shape. There are 6 kinds of inserted diapers that insert extra diapers or handkerchiefs in between two sheets of cloth diapers and 3 kinds of winged diapers designed to shorten drying time with sawing only one side of several layered sheets. Also, there are 2 kinds of velcro-attached diapers that are removable according to the amount of excreta. Commonly used materials are cotton woven of diamond jacquard and knit of diamond Hole Stitch or Plain Stitch. And for handing the edge of diaper, the method of wrapping up the edge with cotton woven or knit bias is used.

• Fibers and Polymers
• /
• v.7 no.3
• /
• pp.245-249
• /
• 2006

The effect of scouring, bleaching and dyeing on the low stress mechanical and surface properties of wool woven fabrics was studied. Fabric properties were measured by the KES-FB system. In general, mechanical properties of the treated fabrics are greatly affected by scouring, moderately by dyeing and least by bleaching.

• Journal of the Korean Home Economics Association
• /
• v.30 no.4
• /
• pp.1-13
• /
• 1992

A computer simulation method for textile designs was developed using a generic-purpose graphics program, LUMENA and its results were applied for costume design simulation. Its design performance was comparable with those using specialized design package programs which are in general very expensive. Three areas of textile design, print pattern design, weaving design, and knitting design, were covered. In the print pattern design simulation, a gird network library was constructed by using basic methods of repeat, and a pattern library by scanning existing print patterns. Through the modification and synthesis of library patterns, many new print patterns could be obtained. In the weaving design simulation, a thread library and a draw-down library were constructed. Using them, simulations of woven textile structures were carried out. In the knitting design simulation, a stitch library and a detail library were made from various types of knit stitch and detail drawings of knit costume, respectively. They were used to make structural knitting patterns and jacquard knitting designs. Using those simulated textile designs, costume design simulation was carried out.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.2 s.161
• /
• pp.189-196
• /
• 2007

The purpose of this study was to find out the purchasing practices and consumer's needs for pet dog apparel to provide useful information for the manufacture of pet dog's apparel. Data were obtained from 203 consumers who have purchased dog apparel(55 male, 148 female). 57.9% of them were 20-30 years old, 27.9% were living in houses, 54.3% were apartment residents. The kinds of dog included were Shihtzu, Martise, and Yorkshireterrier, and 2/3 of the respondents own a single dog, the remainder have at least two dogs. The most important factor to consider when purchasing dog apparel was size, followed by comfort, design, and materials in that order, Most of the apparel was purchased with convenience as the primary consideration, and the average price was 10-30 thousands won, and the items were purchased at pet beauty shops or specialty shops. For materials, it showed that the majority preferred cotton or a cotton mixture which was woven or woven with knit. The survey revealed that the main purposes for the apparel were, in order, to protect the dog from cold weather and direct sunlight, to be good looks and to memorialize a special day. Consumers put the apparel on their dogs 1-3 times per week, on average, and also when they went out for a walk. They were satisfied with the design, color and quality of the material now on the market, but unsatisfied with size and price. They have a preference for cute, but simple designs and a functional style. The respondents wanted to have material that was mild or neutral, stain-resistant, and something that would repel insects.

• Science of Emotion and Sensibility
• /
• v.13 no.1
• /
• pp.279-284
• /
• 2010

This paper surveys basic research for data base system of the fabric structural design. For this purpose, the weave density coefficients of the worsted and cotton fabrics are analysed and discussed with cover factors suggested by Prof. Walz and Picanol company. And the relationship between weave density coefficients and cover factors of the worsted and cotton woven fabrics was analysed and discussed with weave pattern and yarn count. Finally, the process shrinkages of dyeing and finishing processes according to the weave density coefficients of the worsted and cotton fabrics were analysed and discussed as a preliminary study for the data base system of the fabric structural design. As a result, the density coefficients, K values of the worsted and cotton fabrics were ranged from 600 to 1000, and the weave density coefficients of those fabrics are ranged from 0.4 to 0.8 and from 0.2 to 1.0, respectively. The finishing shrinkages for the worsted fabrics are ranged from 2% to 10%, and for cotton fabrics, it was from 2% to 20%. The weave density coefficients of the worsted and cotton fabrics could be distributed according to the looms, weave pattern and weaving and finishing shrinkages as a concept of the data base for the fabric structural design.

• Composites Research
• /
• v.33 no.2
• /
• pp.61-67
• /
• 2020

Preforming is crucial in resin transfer molding process using woven fabric. When shear deformation exceeds the locking angle, wrinkles are generated in the preform, which causes defects in the RTM process. Therefore, in this study, the allowable shear deformation limit of carbon fiber woven fabrics is quantified and the molding characteristics are verified using the actual fabric forming. As a result, the characteristics of creases according to the layer setups have been examined and the results have been discussed. Numerical analyses have been also performed using measured shear properties. These results have been compared with the experimental results.

• Fashion & Textile Research Journal
• /
• v.16 no.2
• /
• pp.326-332
• /
• 2014

To develop cool touch feeling fabrics for summer clothing material, it was manufactured several compositions of woven fabrics, having rayon multi-filament yarn (non-twisted) as warp and various kinds of yarn, such as viscose rayon multi-filament yarn (twisted), tencel$^{(R)}$ spun yarn, PET high absorbance quick dry filament yarn, and PET based rayon-like yarn, as weft. After preparing the fabrics, basic properties of the fabrics were investigated, such as air-permeability, tensile strength, absorption rate, drying rate, etc. Also, surface warm / cool sensations of the woven fabrics were assessed by Qmax Warm / Cool Touch Tester. It was observed that the fabrics composed of viscose rayon multi-filament yarn (warp) and PET high absorbance quick dry filament yarn (weft) showed excellent surface cool touch sensation-the highest Qmax value. This is because the fabric having flat shaped PET high absorbance quick dry filament shows the largest contact area with Qmax measuring plate. And, the fabric also showed superior high absorbance and quick dry property as expected. In addition, we treated phase change material (PCM) on the surface of the fabric composed of viscose rayon multi-filament yarn (warp) and PET high absorbance quick dry filament yarn(weft) to improve the cool touch feeling. However, the surface cool touch feeling was impaired by resin treated with PCM during the finishing process.

• Advanced Composite Materials
• /
• v.17 no.3
• /
• pp.247-258
• /
• 2008

This paper is concerned with the long-term performance of geo-textile (GT) composites in terms of creep deformation and frictional properties. Composites of PVA GT and HDPE GM were made to investigate the advanced properties of long-term performance related to waste landfill applications. The same experiments were also performed for typical polypropylene and polyester GT and compared to PVA GT/HDPE GM composites. We also develop high performance GT composites with GM by using PVA GT, which is capable of improving the frictional properties and thus enhances long-term performance of GT composites. Experimental study reveals that the friction coefficient of GT composites is relatively large compared with those of polyester and polypropylene non-woven GT as long as the friction media has similar size to the particles of domestic standard earth. In addition, the geo-composites bonded with geo-grid by a chemical process were investigated experimentally in terms of strain evaluation and creep response values. Geo-grid plays an important role as a reinforcing material. Three kinds of geo-grid were prepared as strong yarn polyester and they were woven type, non-woven type, and wrap knitted type. The sample geo-grids were then coated with PVC. The rib tensile strength tests were conducted to evaluate geo-grid products in terms of tensile strength with regard to single rib. The test was performed according to GRI-GGI. It was concluded again from the experiments that the tensile and creep strains of the geo-grid showed such stable values that the geo-grid prepared in this study could protect geo-textile partially in practical structures.