• Archives of Pharmacal Research
• /
• 제26권10호
• /
• pp.855-860
• /
• 2003

The effect of silver sulfadiazine (SSD) on the proliferation of human dermal fibroblast (HDF) was studied to determine the impact of the drug on the wound healing process and dermal mechanical strength. Human dermal fibroblasts were cultured to 80% confluency using DMEM with 10% FBS and viability of the cell was estimated using neutral red assay. In addition, the $2^{nd}$ degree burn wound was prepared on the anterior part of rabbit ear skin and dressings containing SSD were applied for 96 h. Presence of inflammatory cells and degree of re-epithelialization were investigated in the wound. After 15 day of the induction of burn wounds, the treated area was excised and dermal mechanical strength was quantitatively measured with a constant speed tensiometer. SSD was found to be highly cyto-toxic in cultured HDF cells. The topical application of SSD (2%) could control the infection as evidenced by the lack of accumulation of inflammatory cells in histological evaluation. Therefore, these observations suggested that the impairment of dermal regeneration and decreased mechanical strength of dermal tissue was resulted from the cyto-toxic effect of SSD on dermal cells. Since the decreased mechanical strength may lead to reduction in resilience, toughness and maximum extension of the tissue, the identification of optimum dose for SSD that limits infection while minimizes the cyto-toxic effect may be clinically relevant.

• Archives of Pharmacal Research
• /
• 제28권11호
• /
• pp.1311-1316
• /
• 2005

To better define the relationship between dermal regeneration and wound contraction and scar formation, the effects of epidermal growth factor (EGF) loaded in collagen sponge matrix on the fibroblast cell proliferation rate and the dermal mechanical strength were investigated. Collagen sponges with acid-soluble fraction of pig skin were prepared and incorporated with EGF at 0, 4, and 8 $\mu$g/1.7 $cm^{2}$. Dermal fibroblasts were cultured to 80$\%$ confluence using DMEM, treated with the samples submerged, and the cell viability was estimated using MTT assay. A deep, $2^{nd}$ degree- burn of diameter 1 cm was prepared on the rabbit ear and the tested dressings were applied twice during the 15-day, post burn period. The processes of re-epithelialization and dermal regeneration were investigated until the complete wound closure day and histological analysis was performed with H-E staining. EGF increased the fibroblast cell proliferation rate. The histology showed well developed, weave-like collagen bundles and fibroblasts in EGF-treated wounds while open wounds showed irregular collagen bundles and impaired fibroblast growth. The breaking strength (944.1 $\pm$ 35.6 vs. 411.5 $\pm$ 57.0 Fmax, $gmm^{-2}$) and skin resilience (11.3 $\pm$ 1.4 vs. 6.5 $\pm$ 0.6 mJ/$mm^{2}$) were significantly increased with EGF­treated wounds as compared with open wounds, suggesting that EGF enhanced the dermal matrix formation and improved the wound mechanical strength. In conclusion, EGF-improved dermal matrix formation is related with a lower wound contraction rate. The impaired dermal regeneration observed in the open wounds could contribute to the formation of wound contraction and scar tissue development. An extraneous supply of EGF in the collagen dressing on deep, $2^{nd}$ degree-burns enhanced the dermal matrix formation.

• 대한기계학회논문집
• /
• 제19권6호
• /
• pp.1479-1489
• /
• 1995

In this study, tensile strength and modulus were evaluated for a filament wound ring specimen by split disk test and compared with the theoretical values obtained by the rule of mixtures. The circumferentially wound ring specimens were prepared from 4 types of material systems. The results showed that the measured strengths of the composite systems were considerably lower than the theoretical values due to the local bending stresses around the split disk edges. for the measurement of elastic moduli of the filament wound ring specimens, the effect of friction on the strain of the ring must be taken into account. But the effect of friction between the split disk fixture and the ring specimen can be eliminated by averaging the moduli for loading and unloading state with maintaining the same crosshead rates. The measured elastic moduli of ring specimens showed very good agreement with the theoretical values.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제48권1호
• /
• pp.1-12
• /
• 2024

Silk sericin, a natural protein from silkworm cocoons, is emerging as a multifunctional biomaterial in biomedicine, particularly in tissue engineering and wound healing. Recent studies have highlighted its biocompatibility, biodegradability, and potential for chemical modification, which allows it to be incorporated into various scaffold architectures. This review article synthesizes current research, including the development of sericin-based hydrogel scaffolds for tissue engineering and sericin's role in enhancing wound healing. Key findings demonstrate sericin's ability to refine scaffold porosity and mechanical strength, expedite tissue healing, and reduce bacterial load in wounds. The integration of sericin into novel bioactive dressings and its use in peripheral nerve injury repair are also discussed, showcasing its adaptability and efficacy. The convergence of these studies illustrates the broad applications of sericin, from scaffold design to clinical interventions, making it a promising material in regenerative medicine and tissue engineering, with the potential to improve patient outcomes significantly.

• 폴리머
• /
• 제25권2호
• /
• pp.270-278
• /
• 2001

의료용 고분자로 널리 알려진 poly(vinylalcohol)(PVA)와 poly(N-vinylpyrrolidone)(PVP)를 이용하여 상처치료용 하이드로겔을 제조하였다. PVP 하이드로겔의 기계적 강도를 향상시키기 위해 PVA/PVP 혼합용액에 \"freezing and thawing (동결융해)\"을 반복한 후 방사선 ($^{60}$Co${\gamma}$-rays)을 조사하여 하이드로겔을 얻었다. PVA와 PVP의 조성비 (30 : 70 ~ 100 : 0), 동결융해의 반복횟수, PVA 분자량을 변화시키면서 PVA/PVP 하이드로겔의 겔화율, 팽윤도, 겔강도를 측정하였다. PVA/PVP 하이드로겔은 방사선 조사로만 제조되었을 때 보다 동결융해 반복 후 방사선조사했을 때 겔화율과 겔강도가 향상되었다. 이외에 동결융해의 반복정도에 따른 물성의 특징을 논의하였다.특징을 논의하였다.

• Archives of Plastic Surgery
• /
• 제41권6호
• /
• pp.638-646
• /
• 2014

Background The combination of polycaprolactone and hyaluronic acid creates an ideal environment for wound healing. Hyaluronic acid maintains a moist wound environment and accelerates the in-growth of granulation tissue. Polycaprolactone has excellent mechanical strength, limits inflammation and is biocompatible. This study evaluates the safety and efficacy of bio-conjugated polycaprolactone membranes (BPM) as a wound dressing. Methods 16 New Zealand white rabbits were sedated and local anaesthesia was administered. Two $3.0{\times}3.0cm$ full-thickness wounds were created on the dorsum of each rabbit, between the lowest rib and the pelvic bone. The wounds were dressed with either BPM (n=12) or Mepitel (n=12) (control), a polyamide-silicon wound dressing. These were evaluated macroscopically on the 7th, 14th, 21st, and 28th postoperative days for granulation, re-epithelialization, infection, and wound size, and histologically for epidermal and dermal regeneration. Results Both groups showed a comparable extent of granulation and re-epithelialization. No signs of infection were observed. There was no significant difference (P>0.05) in wound size between the two groups. BPM (n=6): $8.33cm^2$, $4.90cm^2$, $3.12cm^2$, $1.84cm^2$; Mepitel (n=6): $10.29cm^2$, $5.53cm^2$, $3.63cm^2$, $2.02cm^2$; at the 7th, 14th, 21st, and 28th postoperative days. The extents of epidermal and dermal regeneration were comparable between the two groups. Conclusions BPM is comparable to Mepitel as a safe and efficacious wound dressing.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
• /
• pp.226.2-226.2
• /
• 2003

.The healing of a bone defect is complex, and involves a wide range of cellular, molecular, physiological, and biological processes. The main effect of bone substitute is to promote wound healing by induce cell proliferation. Bone defect sites usually are localized below the original bone surface; therefore, space production and maintenance between the membrane and the original bone surface is essential. As a result, membranes must have proper mechanical strength to prevent the collapse of the soft tissue and maintain wound space that permits membranes of poly (L-lactide) (PLLA) were fabricated to provide and maintain sufficient space for bone growth. (omitted)

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권2호
• /
• pp.25-28
• /
• 2017

In superconducting coil applications particularly in wet wound coils, coated conductor (CC) tapes are subjected to different type of stresses that could affect its electromechanical transport property. These include hoop stress acting along the length of the CC tape and the Lorentz force acting perpendicular to the CC tape's surface. Since the latter is commonly associated with the delamination problem of multi-layered REBCO CC tapes, more understanding and attention on the delamination phenomena induced in the case of coil applications are needed. Difference on the coefficient of thermal expansion (CTE) of each constituent layer of the CC tape, the bobbin, and the impregnating materials is the main causes of delamination in CC tapes when subjected to thermal and mechanical cycling. In the design of degradation-free superconducting coils, therefore, characterization of the delamination behaviors including mechanism and strength in the multi-layered REBCO CC tapes becomes a critical issue. Various trials to increase the delamination strength by improving interface characteristics at interlayers have been performed. In this study, in order to investigate the influences of laser cleaning and Ag annealing treated at the substrate side surface, transverse tensile tests were conducted under different sample configurations using $4.5mm{\times}8mm$ upper anvil. The mechanical delamination strength of differently processed CC samples was examined at room temperature (RT). As a result, the Sample 1 with the additional laser cleaning and Ag annealing processes and the Sample 2 with additional Ag annealing process only showed higher mechanical delamination strength as compared to the Sample 3 without such additional treatments. Sample 3 showed quite different behavior when the loading direction is to the substrate side where the delamination strength much lower as compared to other cases.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권3호
• /
• pp.13-17
• /
• 2015

In superconducting coil applications particularly in wet wound coils, coated conductor (CC) tapes are subjected to different type of stresses. These include hoop stress acting along the length of the CC tape and the Lorentz force acting perpendicular to the CC tape's surface. Since the latter is commonly associated with delamination problem of multi-layered CC tapes, more understanding and attention on the delamination phenomena induced in the case of coil applications are needed. Difference on the coefficient of thermal expansion (CTE) of each constituent layer of the CC tape, the bobbin, and the impregnating materials is the main causes of delamination in CC tapes when subjected to thermal cycling. The CC tape might also experience cyclic loading due to the energizing scheme (on - off) during operation. In the design of degradation-free superconducting coils, therefore, characterization of the delamination behaviors including mechanism and strength in REBCO CC tapes becomes critical. In this study, transverse tensile tests were conducted under different loading conditions using different size of upper anvils on the GdBCO CC tapes. The mechanical and electromechanical delamination strength behaviors of the CC tapes under transverse tensile loading were examined and a two-parameter Weibull distribution analysis was conducted in statistical aspects. As a result, the CC tape showed similar range of mechanical delamination strength regardless of cross-head speed adopted. On the other hand, cyclic loading might have affected the CC tape in both upper anvil sizes adopted.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제33권2호
• /
• pp.144-148
• /
• 2016

Recently, silk sericin has been studied extensively for biomedical and cosmetic applications because of its unique properties, including UV resistance and wound healing ability. For use in applications, sericin is fabricated in various forms including films and gels. However, the mechanical properties of sericin are too weak. In this basic study on improving the mechanical properties of sericin, a silk sericin aqueous solution was separated into two layers by centrifugation. The solution viscosity, molecular conformation, and mechanical properties of each separation layer of the sericin were examined. Sericin from the lower layer had a higher solution viscosity and film mechanical properties (strength and strain) than that from the upper layer, implying that sericin from the lower layer had a higher molecular weight than that from the upper layer. The molecular conformation of the sericin films varied depending on the casting solvent. In aqueous solution, the sericin film from the lower layer showed a ${\beta}$-sheet conformation, whereas that from the upper layer displayed a random coil conformation. All the sericin films showed a highly ${\beta}$-sheet-crystallized state when cast in formic acid, regardless of the separation layer.