• 대한인간공학회지
• /
• 제11권2호
• /
• pp.3-13
• /
• 1992

Resultant compressions on the L5/S1 joint of six subjects were studied as they lif- ted light weights in sitting and standing work postures. The subjects activities were photographed and analysed later by a static biomechamical computer model. Statistically significant differences were found between the result of the two postures analyses. Sitting posture showed significantly high compressions on the joint when doing several material handling tasks having the same work loads from the hip joint. Therefore, it is recommended that working with light weights in standing is less hazardous than doint the same work sitting postures, although both the maximum compression forces are under the Action Limit suggested by NIOSH.

• 대한산업공학회지
• /
• 제42권2호
• /
• pp.122-128
• /
• 2016

The purpose of this study is to improve the firing elevation driving method for towed howitzer to prevent the musculoskeletal disorders. To adjust the firing elevation, it is required to rotate the hand wheel and this work has been done manually in the firing test range as the same method as field artillery troops. In the firing test range, the motor-driven firing elevation adjustment device was developed to improve the working efficiency and safety. These were compared by using posture classification scheme of RULA and REBA. It was measured elapsed time to investigate the improved operational efficiency. The optimal posture of upper body to operate the hand wheel for field artillery troops was proposed.

• 대한안전경영과학회지
• /
• 제23권2호
• /
• pp.25-30
• /
• 2021

The possibility of developing musculoskeletal disorders increases with the length of service of the worker. Musculoskeletal disorders can occur when performing repetitive and forceful movements. Therefore, Cargo drivers operate repeatedly in the wrong posture for a long time. When loading and unloading a cargo, the cargo driver works repeatedly with force. Cargo operators are also exposed to musculoskeletal disorders in the working environment due to poor posture and repetitive movements. In this study, we are going to conduct a study on the level of awareness and prevention of the possibility of musculoskeletal disorders in cargo drivers for long periods of time. As a result of the study, the factors that cause musculoskeletal disorders in each group can occur during the long-term operation and preparation of drivers.

• 한국의류산업학회지
• /
• 제9권2호
• /
• pp.237-242
• /
• 2007

The purpose of this study is to examine the functionality with improved pattern-design working uniform(protocol, P) and current working uniform(control, C). Movement functionality evaluation of improved pattern-design working uniform was carried out through sensory evaluation of working uniform. Movements for the sensory evaluation consisted of four types of up and down and horizontal movements of the shoulders, four types of waist movements and five types of knee movements. The results have been shown as follows: The sensory value of back girth, wrist, side seam area of the "P" with the posture of raising an arm forward up to $90^{\circ}$ and the maximal arm's vertical movement significantly improved compared to the "C". Therefore, it can be concluded that movement functionality was increased with the improved pattern-design working uniform in the respect of arm's up and down movement. Furthermore, for P, Movement functionality improvements were shown in P with arm's horizontal movement, waist bending movement, and knee movement. Current working uniform(C) is jumper-type which wa designed without consideration for movement functionality of the arms and legs. But Pattern-design uniform(P) which was developed in this study. Therefore, the more patterns development, the better movement functionality in working uniform. The improved movement functionality improvements in working uniform will provide not only personal pleasantness but also efficiency of productivity at construction sites. In respect of human body's movement, further study for improved working uniform is required.

• 한국농촌생활과학회지
• /
• 제8권2호
• /
• pp.119-124
• /
• 1997

In this study we tried to give a decision on propriety of working conditions, to present ideas on reducing work loads, and to grope for efficiency of agricultural works. For this we examined the actual working conditions of cultivating welsh onion in the summer ground. And we improved harmful factors that affect farmer's health by considering results of previous study and farmer's subjective sensation. And we measured. compared, and analyzed the farmer's work loads before and after improvement. The results of this study are as follows ; 1. According to examine the actual working conditions of cultivating welsh onion in the summer ground, farmers have experienced physical and mental chronic fatigue on the basis of farmer's appel to eye - fatigue and sun - burned skin on hot working environment including excessive ultraviolet rays, the rough ground condition, inconsistent arrangement of working stand and sorter, heavy - weared habits, and unsuitable working posture. 2. When we improved harmful factors that affect farmer's health, conformed the effects on important work efficiency index such as heart rate, electromyovolume, body temperature, and microclimate inside clothing and work loads were decreased by eliminating the hillock and obstacles of ground, decreasing the clothing weight, using proper clothing appliances such as hat and sunglasses, controlling height of working stand and sorter suitably, improving the working postures and methods as using assistant appliances, alloting the working time and sequence effectively and presenting the light gymnastic exercises and rest for fatigue restoration.

• 한국산업보건학회지
• /
• 제22권2호
• /
• pp.107-118
• /
• 2012

Objectives: This study examines the occurrence of disease resulting from low back pain and factors of working environment meaningfully influencing the occurrence of lumbago as well as analyzes '2nd Korean Working Condition Survey (KWCS)' conducted in 2010 so as to establish the prevention and improvement measures. Methods: The analysis method is that it is to compare the prevalence rate of low back pain according to working environment via odds ratio and to implement the test about the factors having the difference in working environment between low back pain group and normal group through weighted t-test. Results: As a result, it indicates that there is a meaningful difference for prevalence rate of low back pain according to age, status in employment and education level which are socio-demographical factors. The analysis in working hours shows that the period of work is a factor raising the prevalence rate of low back pain rather than weekly working hours. The analysis in the work risk factor indicates that the increase in prevalence rate of low back pain takes place to either workers with repetitive movement and continuously standing posture or those with heavy stress and emotional labour. Conclusions: Workers with low back pain have suffered from accident, depression, anxiety disorder and sleep. The factors in which the prevalence rate of low back pain decrease are to provide information on health and safety and working speed, and enough rest.

• Journal of Biosystems Engineering
• /
• 제40권1호
• /
• pp.28-34
• /
• 2015

Purpose: This study aimed to install an RTK-GPS (Real Time Kinematic-Global Positioning System) and IMU (Inertial Measurement Unit) on a tractor used in a farm to measure positions, pasture topography, posture angles, and vibration accelerations, translate the information into maps using the GIS, analyze the characteristics of grass harvesting work, and establish new technologies and construction standards for pasture infrastructure improvement based on the analyzed data. Method: Tractor's roll, pitch, and yaw angles and vibration accelerations along the three axes during grass harvesting were measured and a GIS map prepared from the data. A VRS/RTK-GPS (MS750, Trimble, USA) tractor position measuring system and an IMU (JCS-7401A, JAE, JAPAN) tractor vibration acceleration measuring systems were mounted on top of a tractor and below the operator's seat to obtain acceleration in the direction of progression, transverse acceleration, and vertical acceleration at 10Hz. In addition, information on regions with bad workability was obtained from an operator performing grass harvesting and compared with information on changes in tractor posture angles and vibration acceleration. Results: Roll and pitch angles based on the y-axis, the direction of forward movements of tractor coordinate systems, changed by at least $9-13^{\circ}$ and $8-11^{\circ}$ respectively, leading to changes in working postures in the central and northern parts of the pasture that were designated as regions with bad workability during grass harvesting. These changes were larger than those in other regions. The synthesized vectors of the vibration accelerations along the y-axis, the x-axis (transverse direction), and the z-axis (vertical direction) were higher in the central and northwestern parts of the pasture at 3.0-4.5 m/s2 compared with other regions. Conclusions: The GIS map developed using information on posture angles and vibration accelerations by position in the pasture is considered sufficiently utilizable as data for selection of construction locations for pasture infrastructure improvement.

• 대한물리의학회지
• /
• 제15권3호
• /
• pp.69-77
• /
• 2020

PURPOSE: The aim of this study was to measure changes in spine inclination and thoracolumbar structure and morphology according to upper-extremity movements with and without resistance in order to evaluate the spine stability in workers. METHODS: Forty-eight middle-aged male workers (mean age, 40.48 ± 6.27 years) participated in this study. Using the spine analysis system, changes in the inclination of the spine and structure as well as shape of the thoracolumbar spine were measured. For posture measurement, the postures of standing, lifting the right and left arms (shoulder joint 90° flexion), and lifting with both arms were measured in random order. In addition, variables were measured using a resistance of 3 kg for each posture. The statistical significance level was set at α = .05 for all variables. RESULTS: There were statistically significant differences between the front and back inclinations of the spine, kyphotic curve of the thoracic spine, lordotic curve of the lumbar spine, rotation changes in the thoracolumbar spine, and rotation changes in the T4 vertebra (p < .05). However, there was no significant difference in the left and right tilts of the spine. In the post-hoc analysis, rotation changes in the T4 vertebra showed a significant difference in posture when resistance was applied to the left and right sides CONCLUSION: Causes of musculoskeletal diseases include excessive thoracic spine rotation, torsion, and hyperlordosis of the lumbar spine. Therefore, it is necessary to improve the working environment in order to ensure a healthy posture and prevent musculoskeletal diseases that can reduce the ability to carry various and/or excessive loads.

• Safety and Health at Work
• /
• 제9권2호
• /
• pp.125-132
• /
• 2018

Background: According to the US Bureau of Labor Statistics, musculoskeletal disorders (MSDs) accounted for 32% of all nonfatal injury and illness cases in 2014 among full-time workers. Our objective was to review and summarize the evidence linking occupational exposures to vibration and awkward posture with MSDs of the shoulder and neck. Methods: A literature search was conducted using the terms musculoskeletal disorders, vibration, and awkward posture. All types of observational epidemiologic studies, with the exception of case reports, published during 1998-2015 were included. Databases searched were MEDLINE (Ovid), Embase (Ovid), Scopus, Ergonomic Abstracts, NIOSHTIC-2, and Health and Safety Science Abstracts. Results: Occupational exposures to whole-body or hand-arm vibration were significantly associated with or resulted in MSDs of the shoulder and neck. Awkward postures while working were also associated with MSDs in these locations. These findings were consistent across study designs, populations, and countries. Conclusion: Occupational exposure to vibration and awkward posture are associated with shoulder and neck MSDs. Longitudinal studies are required to elucidate the mechanisms responsible for these associations, and intervention studies are warranted.

• 지역사회간호학회지
• /
• 제28권4호
• /
• pp.472-481
• /
• 2017

Purpose: The purpose of this study were to compare working condition, socioeconomic status, and health status between elderly and non-elderly workers and to examine the influencing factors of health status according to age groups. Methods: This study is a secondary analysis of data extracted from the 2014 Korean Working Conditions Survey. For the present analysis, 15,980 elderly workers over the age of 55 and 32,037 non-elderly workers under the age of 55 were selected. Results: The prevalence of subjective unhealthy status and poor mental health were significantly higher among the elderly workers than the non-elderly workers. The elderly workers were more likely to have lower level of education and income than the non-elderly workers. They also reported less support from colleagues and managers, however, have more decision authority. Among the elderly workers, long working hours, awkward posture, physical environmental risks, quantitative demand, decision authority, social support, age discrimination, education level, and income level were significant predictors of subjective health status or mental health. Conclusion: For keeping elderly workers healthy and productive, work environment needs to become more age-friendly. An age-friendly workplace may include: accommodative support, workers' participation, minimization of environment risk, etc.