• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제13권4호
• /
• pp.307-314
• /
• 2013

We designed and implemented a fork-type automatic guided vehicle (AGV) with a laser guidance system. Most previous AGVs have used two types of guidance systems: magnetgyro and wire guidance. However, these guidance systems have high costs, are difficult to maintain with changes in the operating environment, and can drive only a pre-determined path with installed sensors. A laser guidance system was developed for addressing these issues, but limitations including slow response time and low accuracy remain. We present a laser guidance system and control system for AGVs with laser navigation. For analyzing the performance of the proposed system, we designed and built a fork-type AGV, and performed repetitions of our experiments under the same working conditions. The results show an average positioning error of 51.76 mm between the simulated driving path and the driving path of the actual fork-type AGV. Consequently, we verified that the proposed method is effective and suitable for use in actual AGVs.

• 드라이브 ㆍ 컨트롤
• /
• 제20권4호
• /
• pp.27-34
• /
• 2023

Weeding in orchards is closely associated with productivity and quality. The customary weeding process is both labor-intensive and time-consuming. To solve the problems, there is need for automation of agricultural robots and machines in the agricultural field. On the other hand, orchards have complicated working areas due to narrow spaces between trees and amorphous terrain. Therefore, it is necessary to develop customized robot technology for unmanned weeding work within the department. This study developed a path generation and path control method for unmanned weeding according to the orchard environment. For this, the width of the weeding span, the number of operations, and the width of the weeding robot were used as input parameters for the orchard environment parameters. To generate a weeding path, a weeding robot was operated remotely to obtain GNSS-based location data along the superheated center line, and a driving performance test was performed based on the generated path. From the results of orchard field tests, the RMSE in weeding period sections was measured at 0.029 m, with a maximum error of 0.15 m. In the steering period within row and steering to the next row sections, the RMSE was 0.124 m, and 0.047 m, respectively.

• Agricultural and Biosystems Engineering
• /
• 제2권2호
• /
• pp.50-58
• /
• 2001

Chemical application is very hazardous in confined spaces under the canopy ceiling in Korean vineyard. For a small orchard sprayer adaptable to such a working condition, a low-cost autonomous steering control system was developed using two ultrasonic sensors, two electrically-operated cylinders and 80196kc microprocessor. A distance ranging system timed the round-trip for each ultrasonic wave to travel against parallel targets, placed every 1.5m spacing along both sides of a desired path. A steering control algorithm of the autonomous operation began with ranging left and right targets and the heading was decided using difference between the distances. Electrically-operated cylinders actuated steering clutches to guide the sprayer. Evaluation tests showed that the orchard sprayer could travel within RMS value of 5cm along the desired path. Ground speed did not affect the performance of the autonomous guidance system at the speed ranges of 0.29~0.52m/sec.

• 대한기계학회논문집A
• /
• 제20권10호
• /
• pp.3160-3172
• /
• 1996

A search algorithm for the collision free, time optimal transport path of overhead cranes has been proposed in this paper. The map for the working environment of overhead cranes was constructed in the form of three dimensional grid. The obstacle occupied region and unoccupied region of the map has been represented using the octree model. The best-first search method with a suitable estimation function was applied to select the knot points on the collision free transport path to the octree model. The optimization technique, minimizing the travel time required for transporting objects to the goal while subjected to the dynamic constraints of the crane system, was developed to find the smooth time optimal path in the form of cubic spline functions which interpolate the selected knot points. Several simulation results showed that the selected estimation function worked effectively insearching the knot points on the collision free transport path and that the resulting transport path was time optimal path while satisfying the dynamic constraints of the crane system.

• 드라이브 ㆍ 컨트롤
• /
• 제14권2호
• /
• pp.9-15
• /
• 2017

The steering systems of all-terrain cranes have been developed with various control strategies for the stability and drivability. To optimally control the input steering angle, an accurate mathematical model that represents the actual crane dynamics is required. The derivation of an accurate mathematical model to optimally control the steering angle, however, is difficult since the steering-control strategy generally varies with the magnitude of the crane's longitudinal velocity, and the postures of the crane's working parts vary while it is being driven. To address this problem, this paper proposes an automatic steering-control algorithm that is based on the MPC (model predictive control) with a disturbance observer for all-terrain cranes. The designed disturbance observer of this study was used to estimate the error between the base steering model and the actual crane. A model predictive controller was used for the computation of the optimal steering angle, along with the use of the base steering model with an estimated uncertainty. Performance evaluations of the designed control algorithms were conducted based on a curved-path scenario in the Matlab/Simulink environment. The performance-evaluation results show a sound reference-path-tracking performance despite the large uncertainties.

• 한국지능시스템학회논문지
• /
• 제18권5호
• /
• pp.592-598
• /
• 2008

본 논문에서는 AGVS(Automated Guide Vehicle System)의 충돌 및 교착 상태를 예측 및 회피하는 방법을 제안하고 회피에 따른 AGV의 지연 시간을 분산시킬 수 있도록 경로 점유권(PO: right of Path Occupying)을 제안한다. 이를 위해 먼저, AGV의 복잡한 작업 환경을 AGVS의 필요한 요소로 분류하는 모델을 제시한다. 이후, AGV의 최단 경로 탐색 알고리즘을 그래프 탐색 기법인 A* 알고리즘을 이용하여 구현하고 경로의 소요 시간, 방향 및 방향 전환 벡터를 얻은 뒤 이를 시뮬레이션 프로그램의 입력 데이터 사용하였다. 시뮬레이션 수행은 충돌 예측과 회피를 평가하기 위해 사용되었으며 그 결과 본 논문에서 제안한 방법이 지연시간을 최소화하는데 효과적임을 입증하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제25회 춘계학술대회
• /
• pp.176-180
• /
• 1997

Evaluating an optimum seal design to minimize leakage is concerned in the aspect of flow control. Flow is characterized into five categories according to its leakage path. Effect of geometry and leakage path are evaluated according to variation of sealing geometry. To simulate an oil jet or oil mist type high speed spindle lubrication, the working fluid is regarded as two phases that are mixed flow of oil phase and air phase. Both of the turbulence and the compressible flow model were introduced in CFD(Computational Fluid Dynamics) analysis. This offers a methodological way of enhancement seal design for high speed spindle.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1004-1008
• /
• 1990

This research focuses on developing a new and computationally efficient algorithm for free space structuring and planning collision free paths for an autonomous mobile robot working in an environment populated with polygonal obstacles. The algorithm constructs the available free space between obstacles in terms of free convex area. A collision free path can be efficiently generated based on a graph constructed using the midpoints of common free links between free convex area as passing points. These points correspond to nodes in a graph and the connection between them within each convex area as arcs in this graph. The complexity of the search for collision free path is greatly reduced by minimizing the size of the graph to be searched concerning the number of nodes and the number of arcs connecting them. The analysis of the proposed algorithm shows its efficiency in terms of computation ability, safety and optimality.

• 한국실내디자인학회논문집
• /
• 제14권2호
• /
• pp.135-141
• /
• 2005

Subsequent to major changes in workplace such as communication method, uncertain organizational environment, and globalizaiton, several studies in workplace have explored the effects of those changes on work outcomes. Especially, employees need to have the balance in working alone and working with others. The purpose of this study is to examine the effects of control over the physical environment by individuals and the effects of flexibility on individual and group work outcomes in the workplace, to examine the effects of distraction on work outcomes, and to suggest a interrelationships among variables. In this study, four hundred and nine questionnaires were collected from employees of three manufacturing corporations in Michigan, U. S. In order to explore the causal interferences among multiple relationships suggested in this study, path analysis was employed using Lisrel 8.54. The results indicated that control over the physical environmental features of the workplace positively influenced job satisfaction. The findings also supported the hypothesis that flexibility is positively related to task group cohesiveness. It was found that distraction was negatively associated with control and flexibility. However, it was not supported that control was positively associated with perceived performance. This study found control and flexibility in the workplace to be important. Some practical implications were suggested emphasizing that control and flexibility allow limited resources to be used in ways that permit individuals to work effectively within a changing work environment.

• 제어로봇시스템학회논문지
• /
• 제12궈1호
• /
• pp.66-71
• /
• 2006

Recently, there are lots of concerning on ubiquitous environment of robots and URC (Ubiquitous Robotic Companion). In this paper, a practical ubiquitous interface system far controlling mobile robots in indoor environments was proposed. The interface system was designed as a manager-agent model including a PC manager, a mobile manager, and robot agents for being able to be accessed by any network. In the system, the PC manager has a 3D virtual environment and shows real images for a human-friendly interface, and share the computation load of the robot such as path planning and managing geographical information. It also contains Hybrid Format Manager(HFM) working for transforming the image, position, and control data and interchanging them between the robots and the managers. Mobile manager working in the minimized computing condition of handsets has a mobile interface environment displaying the real images and the position of the robot and being able to control the robots by pressing keys. Experimental results showed the proposed system was able to control robots rising wired and wireless LAN and mobile Internet.