• 산업경영시스템학회지
• /
• 제28권4호
• /
• pp.1-6
• /
• 2005

This study is to investigate empirically the turnover awareness of key member working in Research & Development Division in high technology electronic R&D institute. Through the analysis of 106 questionnaires and individual depth interview with key member who is evaluated as core researcher and developer in their working project or has good results in the last 2-3 years, this study obtains the practical informations on the understandings of their professional consciousness and extend of turnover awareness etc. The findings are as follows. Two-thirds of the researcher has the mind of turnover to improve job stability and develop their career. They have an self-awareness that they are key member as a core competent person in working project and their organization, but are dissatisfied with the underestimation of their performances that are not recognized by the organization as they expected level. And the result indicates that many of them haven't find their visions in their organization.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1148-1153
• /
• 2004

Recently the high speed end-milling processing is demanded the high-precise technique with good surface rougj1ness and rapid time in aircraft, automobile part and molding industry. The working factors of high speed end-milling has an effect on surface roughness of cutting surface. Therefore this study was carried out to analyze the working factors to get the optimum surface roughness by design of experiment. From this study, surface roughness have an much effect according to priority on Spindle speed, feed rale, hardness and axial depth of cut By design of experiment, it is effectively represented shape characteristics of surface roughness in high speed end-milling And determination($R^2$) coefficient of regression equation had a satisfactory reliability of 89.7% and regression equation of surface roughness is made by regression analysis.

• 한국정밀공학회지
• /
• 제21권6호
• /
• pp.52-59
• /
• 2004

Recently the high speed end-milling processing is demanded the high-precise technique with good surface roughness and rapid time in aircraft, automobile part and molding industry. The working factors of high speed end-milling has an effect on surface roughness of cutting surface. Therefore this study was carried out to analyze the working factors to get the optimum surface roughness by design of experiment. From this study, surface roughness have an much effect according to priority on distance of cut, feed rate, revolution of spindle and depth of cut. By design of experiment, it is effectively represented shape characteristics of surface roughness in high speed end-milling. And determination($R^2$) coefficient of regression equation had a satisfactory reliability of 76.3% and regression equation of surface roughness is made by regression analysis.

• 한국의류학회지
• /
• 제34권4호
• /
• pp.553-562
• /
• 2010

This survey investigates the conditions of summer working uniforms for contracted foodservice workers. The data were obtained from 67 workers through in-depth interviews (July 2005~October 2005). The results of study are as follows: The working environment changed to menu and cooking method (air temperature $28\sim37^{\circ}C$, humidity 72~86 %RH, radiant temperature $27\sim37^{\circ}C$, air velocity 0.14~0.37m/sec). They answered that the working environment has high temperatures, humidity, excessive noise, and liability to slide. The typical accidents were burns, cuts, slide, and ligament injuries in the workplace. Work duties consisted of cooking, serving food, washing, and cleaning up leftover food. All the employees carried out multi tasks. The primary working postures and motions were standing, crouching, and lifting. The female workers usually wore underwear (panty and brassiere), upper and lower work wear, aprons, waterproof-aprons, cotton-gloves, rubber-gloves, socks, and rubber-boots. The satisfaction of the uniform was relatively low for trousers and waterproof-aprons. The answer about the fit was generally "comfortable." They answered "back," "chest," and "head" were wet with perspiration during work. The uncomfortable parts were the crotch and neck. Questions concerning their satisfaction with the material of uniforms indicated a high rate of dissatisfaction, particularly for ventilation and absorbency. In case of the colors of the working uniform, workers preferred white color for the upper part, and black color for the lower part.

• Safety and Health at Work
• /
• 제2권4호
• /
• pp.355-364
• /
• 2011

Objectives: Though sulfur dioxide (SO2) is used widely at workplaces, itseffects on humans are not known. Thresholds are reportedwithout reference to gender or age and occupational exposure limits are basedon effects on lung functioning, although localized effects in the upper airways can be expected. This study's aim is to determine thresholds with respect to age and gender and suggests a new approach to risk assessment using breathing reflexes presumably triggered by trigeminal receptors in the upper airways. Methods: Odor thresholds were determined by the ascending method of limits in groups stratified by age and gender. Subjects rated intensities of different olfactory and trigeminal perceptions at different concentrations of $SO_2$. During the presentation of the concentrations, breathing movements were measured by respiratory inductive plethysmography. Results: Neither age nor gender effects were observed for odor threshold. Only ratings of nasal irritation were influenced bygender. A benchmark dose analysis on relative respiratory depth revealed a 10%-deviation from baseline at about 25.27 mg/$m^3$. Conclusion: The proposed new approach to risk assessment appearsto be sustainable. We discuss whether a 10%-deviation of breathingdepth is relevant.

• 한국심리학회지 : 문화 및 사회문제
• /
• 제28권3호
• /
• pp.441-481
• /
• 2022

본 연구는 코로나 19 시기 워킹맘의 일과 가정의 균형과 관련된 경험을 탐색하고자 하였다. 이를 위해 1명 이상의 초등학생 이하의 자녀를 둔 시간제와 전일제 워킹맘 17명을 연구 대상자로 모집하여 심층면접을 실시하였다. 심층면담 내용을 근거이론 방법으로 분석한 결과 106개의 개념, 50개의 하위범주, 24개의 범주가 도출되었다. 코로나 19 시기에 워킹맘이 일과 가정을 양립하는 과정에서 경험하는 중심현상은 '신체적, 정서적 소진', '역할 갈등 상황에서의 불안감과 죄책감', '워킹맘이 겪는 일자리 위기', '가족 갈등 심화'로 나타났다. 워킹맘이 시간의 흐름에 따라 중심현상을 극복하여 일과 가정의 양립을 이루는 과정은 '충격과 혼란 단계', '고군분투 단계', '적극적 대처와 타협 단계', '수용 단계', '외상 후 성장 단계'의 5단계로 파악되었다. 이러한 연구 결과를 바탕으로 코로나 19 시기 워킹맘의 일과 가정의 양립 경험에 대한 논의와 후속 연구를 위한 제언을 서술하였다.

• Journal of Korean Neurosurgical Society
• /
• 제55권5호
• /
• pp.261-266
• /
• 2014

Objective : With the increased use of interspinous spacers in the treatment of lumbar stenosis, knowledge of the geometry of the interspinous space is important. To prevent dislodgment of an interspinous spacer, the accurate depth and width of the interspinous space needs to be established to facilitate the best intraoperative selection of correct spacer size. Methods : To determine the depth and width of the interspinous space, two methods are available which utilize plain film and magnetic resonance imaging (MRI). Data analysis of the interspinous depth and width was undertaken in 100 patients. Results : The standard deviations were variable, since skin thickness (zone 1) was altered by sex and age. The difference in the zone 1 distance between adjacent interspinous processes varied according to gender (p<0.05), but was not influenced by age [p=0.32 by analysis of variance between groups (ANOVA)]. Zone 2, the supraspinous, and zone 3, the interspinous ligament depths, comprise the operative working area during insertion of an interspinous spacer. There were no differences with regard to gender or age (p>0.05). For zones 6 and 7, the interspinous distances at the narrowest and widest points, respectively, were found to decrease with the aging process, but the decrease was not statistically significant. There were no differences with regard to gender (p>0.05). Conclusion : This study provides additional information on the interspinous space. This statistical data are valuable for use in the design of interspinous spacers.

• 로봇학회논문지
• /
• 제3권3호
• /
• pp.194-202
• /
• 2008

This paper describes a new method for indoor environment mapping and localization with stereo camera. For environmental modeling, we directly use the depth and color information in image pixels as visual features. Furthermore, only the depth and color information at horizontal centerline in image is used, where optical axis passes through. The usefulness of this method is that we can easily build a measure between modeling and sensing data only on the horizontal centerline. That is because vertical working volume between model and sensing data can be changed according to robot motion. Therefore, we can build a map about indoor environment as compact and efficient representation. Also, based on such nodes and sensing data, we suggest a method for estimating mobile robot positioning with random sampling stochastic algorithm. With basic real experiments, we show that the proposed method can be an effective visual navigation algorithm.

• Journal of Biosystems Engineering
• /
• 제21권4호
• /
• pp.449-455
• /
• 1996

The temperature distributions at various soil depths were predicted by heat transfer model during and after infrared irradiation on sand loam or loam soil. At each soil depth, predicted and measured temperature distributions were compared with using the mean relative percentage deviation and standard error. The mean relative percentage deviation was less than 10% between predicted and measured temperature distributions at each soil depth. Thus, it was concluded that the temperature distribution at each soil depth could be predicted satisfactorily by heat transfer model. Also, it is expected that these predicted temperature distributions can be used as basic information for determining the working speed of weeder and the size when the real weeder is constructed.

• 소성∙가공
• /
• 제8권2호
• /
• pp.152-159
• /
• 1999

This study is to investigate the effects of warm deep drawing with aluminum sheets of A1050-H16 and A5020-H32 for improving deep drawability. Experiments for producing circular cups and square cups were carried out for various working conditions, such as forming temperature and blank shapes. The limit drawing ratio(LDR) of 2.63 in warm deep drawing of circular cups in case of A5020-H32 sheet, whereas LDR of 2.25 in case of A1050-H16, could be obtained and the former was 1.4 times higher than the value at room temperature. The maximum relative drawing depth for square cups of A5020-H32 material was also about 1.92 times deeper than the depth drawn at room temperature. The effects of blank shape and forming temperature on drawability as well as thickness distribution of drawn cups were examined and discussed.