• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.694-701
• /
• 1990

The cycle of heat engine which produces the maximum power output is constructed when heat sources are finitely constant, and the maximum power as a thermodynamic limit of the engine, is obtained. The characteristics of the maximum power cycle are as follows, which represent the operation conditions and design conditions of the heat engine to produce the maximum power output. In heat exchangers, the temperature profiles of the heat source and the working fluid have the same functional formula and the ratio of the working fluid temperature to the heat source temperature is constant. When heat capacity flow rates(product of the specific heat and the mass flow rate) of the working fluid as well as the heat source are constant, the values of those of working fluid exist between those of two heat sources. The relation of the temperature and the heat capacity flow rate is established without the states of the heat sources and the capacities of heat exchangers, which is ( $T_{h}$/ $T_{H}$)( $C_{h}$/ $C_{H}$)=( $T_{1}$/ $T_{L}$)( $c_{1}$/ $c_{L}$)=1. The capacity of the heat exchanger of hot side is equal to that of cold side regardless of the states of the heat sources and the total capacities of heat exchangers.hangers.ers.

• Wind and Structures
• /
• v.25 no.6
• /
• pp.507-535
• /
• 2017

In the strong wind shutdown state, the blade position significantly affects the streaming behavior and stability performance of wind turbine towers. By selecting the 3M horizontal axis wind turbine independently developed by Nanjing University of Aeronautics and Astronautics as the research object, the CFD method was adopted to simulate the flow field of the tower-blade system at eight shutdown positions within a single rotation period of blades. The effectiveness of the simulation method was validated by comparing the simulation results with standard curves. In addition, the dynamic property, aerostatic response, buckling stability and ultimate bearing capacity of the wind turbine system at different shutdown positions were calculated by using the finite element method. On this basis, the influence regularity of blade shutdown position on the wind-induced response and stability performance of wind turbine systems was derived, with the most unfavorable working conditions of wind-induced buckling failure of this type of wind turbines concluded. The research results implied that within a rotation period of the wind turbine blade, when the blade completely overlaps the tower (Working condition 1), the aerodynamic performance of the system is the poorest while the aerostatic response is relatively small. Since the influence of the structure's geometrical nonlinearity on the system wind-induced response is small, the maximum displacement only has a discrepancy of 0.04. With the blade rotating clockwise, its wind-induced stability performance presents a variation tendency of first-increase-then-decrease. Under Working condition 3, the critical instability wind speed reaches its maximum value, while the critical instability wind speed under Working condition 6 is the smallest. At the same time, the coupling effect between tower and blade leads to a reverse effect which can significantly improve the ultimate bearing capacity of the system. With the reduction of the area of tower shielded by blades, this reverse effect becomes more obvious.

• Journal of Power System Engineering
• /
• v.18 no.6
• /
• pp.120-125
• /
• 2014

In this paper, suitable working fluid of 1MW Organic Rankine Cycle(ORC) with liquid-vapor ejector using effluent from power plant is selected. The results of comparison performance of 5 refrigerants are as follows; R600a, R134a, R1270, R236fa, R235fa. The operating parameters considered in this study include the condensation capacity evaporation capacity and efficiency. As a result of comparison of basic ORC system and with liquid-vapor ejector, with ORC system presents the higher system efficiency since the ejector makes the turbine outlet pressure lower than condensation pressure through its pressure recovery. Also, this ejector ORC system is advantageous in miniaturizing the size of components owing to decrease of evaporation capacity and condensation capacity.

• Korean Journal of Biological Psychiatry
• /
• v.11 no.2
• /
• pp.155-164
• /
• 2004

Objective:The present study examined the association between basic neurocognitive functions and emotional recognition in chronic schizophrenia. Furthermore, to Investigate cognitive variable related to emotion recognition in Schizophrenia. Methods:Forty eight patients from the Yongin Psychiatric Rehabilitation Center were evaluated for neurocognitive function, and Emotional Recognition Test which has four subscales finding emotional clue, discriminating emotions, understanding emotional context and emotional capacity. Measures of neurocognitive functioning were selected based on hypothesized relationships to perception of emotion. These measures included:1) Letter Number Sequencing Test, a measure of working memory;2) Word Fluency and Block Design, a measure of executive function;3) Hopkins Verbal Learning Test-Korean version, a measure of verbal memory;4) Digit Span, a measure of immediate memory;5) Span of Apprehension Task, a measure of early visual processing, visual scanning;6) Continuous Performance Test, a measure of sustained attention functioning. Correlation analyses between specific neurocognitive measures and emotional recognition test were made. To examine the degree to which neurocognitive performance predicting emotional recognition, hierarchical regression analyses were also made. Results:Working memory, and verbal memory were closely related with emotional discrimination. Working memory, Span of Apprehension and Digit Span were closely related with contextual recognition. Among cognitive measures, Span of Apprehension, Working memory, Digit Span were most important variables in predicting emotional capacity. Conclusion:These results are relevant considering that emotional information processing depends, in part, on the abilities to scan the context and to use immediate working memory. These results indicated that mul- tifaceted cognitive training program added with Emotional Recognition Task(Cognitive Behavioral Rehabilitation Therapy added with Emotional Management Program) are promising.

• Safety and Health at Work
• /
• v.10 no.4
• /
• pp.527-530
• /
• 2019

The increasing prevalence of inactivity and obesity, along with aging, has implications on work capacity of labor force. This study reports the relationships between activity level and BMI by age with objectively measured physical workload. Data were examined from a sample of 19 481 Finnish employees using an estimate of minute-to-minute oxygen consumption based on R-R interval recordings. The mean estimated %VO₂max during the working day was 12.1 (±3.6) and 15.1 (±4.5)% for men and women, respectively. Based on a linear model, the mean %VO₂max increased by 1.5%-unit per 10-year increase in age, by 2.1%-unit per 5 kg/㎡ increase in BMI, and decreased by 1.6%-unit if improving physical activity class by two (p < 0.001 for all). Overweight and obesity, together with inactivity, notably increases workload throughout the career, even though at young adulthood, the daily workload is almost the same for each person regardless of the BMI, activity level, or gender. This study highlights the importance of regular physical activity and normal weight in protecting the worker from excessive physical (cardiovascular) workload during the whole working career.

• Safety and Health at Work
• /
• v.11 no.1
• /
• pp.118-124
• /
• 2020

Background: The poultry industry in Pakistan has flourished since the 1960s; however, there are scarce data regarding the impact of occupational exposure on the pulmonary health of farm workers in terms of years working in the industry. The objective of the present study was to assess the effect of poultry environment on the health of occupationally exposed poultry farmers in countries of warm climatic regions, such as Pakistan. This study will also show the effect of exposure to poultry facilities on the health of poultry farmers in the context of low-income countries with a relatively inadequate occupational exposure risk management. Materials and methods: The lung function capacity of 79 poultry workers was measured using a spirometer. Along with spirometry, a structured questionnaire was also administrated to obtain information about age, height, weight, smokers/nonsmokers, years of working experience, and pulmonary health of farm workers. The workers who were directly involved in the care and handling of birds in these intensive facilities were considered and divided into four groups based on their years of working experience: Group I (3-10 months), Group II (1-5 years), Group III (6-10 years), and Group IV (more than 11 years). The forced vital capacity (FVC), forced expiratory volume in one second (FEV1) and the FEV1/FVC ratio were considered to identify lung function abnormalities. Statistical analysis was carried out using independent sample t test, Chi-square test, Pearson's correlation, and linear regression. Results: Based on the performed spirometry, 68 (86 %) of workers were found normal and healthy, whereas 11 (14 %) had a mild obstruction. Of the 11 workers with mild obstruction, the highest number with respect to the total was in Group IV (more than 11 years of working experience) followed by Group III and Group II. Most of the workers were found healthy, which seems to be because of the healthy survivor effect. For the independent sample t test, a significant difference was noticed between healthy and nonhealthy farmers, whereas Chi-square test showed a significant association with height, drugs, and working experience. Linear regression that was stratified by respiratory symptoms showed for workers with symptoms, regression models for all spirometric parameters (FVC, FEV1, and FEV1/FVC) have better predictive power or R square value than those of workers without symptoms. Conclusion: These findings suggest that lung function capacity was directly related to years of working experience. With increasing number of working years, symptoms of various respiratory problems enhanced in the poultry workers. It should be noted that most of the poultry workers were healthy and young, the rationale being that there is a high turnover rate in this profession. The mobility in this job and our finding of 86% of the healthy workers in the present study also proposed healthy worker survivor effect.

• Korean Institute of Interior Design Journal
• /
• no.9
• /
• pp.10-17
• /
• 1996

With the ever-increasing important of high-speed information in society as we move towards the 21 st century. Interior design and it's working condition has been changed a great deal included a sort of each special character and make a difference against the others. It used to be find a great poles asunder of worker's safety and project quality according to the environmental dimension of interior construction field as if they should be a pleasantness or poor condition. This research aimed to improvement of environmental construction field of interior with construction engineers and particular interior labors in 4 phases as : ⅠThe preparatory phase : -Secure a Budget, Environmental safety supervisor -Fix of Design quality, Construction period. -Choice of Construction method, Sub constructing Ⅱ. Starting work phase ; -Capacity , Safety of temporary power line. -Carriage, Stock of Material -Safety of Electronic tools, -Personal protector. Ⅲ. Working period ; -Ventilation, I illumination of working place. -Measurement of environmental working condition Ⅳ.Finish working phase ; -Analysis of measurement data. -Evaluation and making up for the weak point. -Keeping data.

• Korean Journal of Cognitive Science
• /
• v.23 no.4
• /
• pp.487-515
• /
• 2012

The purpose of this study was to investigate the effect of the individual differences in cognitive processes on paragraph comprehension. To do so, the lexical decision task and the pattern comparison task were used to measure the low-level cognitive processes. Digit span task was used to test the phonological loop capacity. The individual differences of the central executive processing capacity were measured by operational span task. Reading span task was used to test the working memory capacity related with the sentence processing. Reading times and accuracies of the logically valid inferences and logically void inferences were tested to measure the high-level cognitive processes. Reading times and accuracies for the target sentences with and without prior explicit causal sentence were measured to test individuals' paragraph comprehension abilities. The results showed that the speed of the low-level cognitive processes was related with the speed of the high-level cognitive processes. Also, the accuracy of the low-level cognitive processes was related with the accuracy of the high-level cognitive processes while there was no significant correlation between the speed and the accuracy in any measures of the cognitive processes. Working memory capacity was related with the accuracy of the cognitive processes while it was not significantly correlated with the speed of the cognitive processes. Most importantly, the speed of low-level cognitive processes significantly affected the speed of the paragraph comprehension while the working memory capacity and the high-level cognitive processes had influences on the accuracies of the paragraph comprehension. The speed of the paragraph comprehension had no influence on the accuracies of the paragraph comprehension.

• Korean Journal of Community Nutrition
• /
• v.19 no.1
• /
• pp.71-83
• /
• 2014

The purpose of the study was to implement and evaluate a nutrition capacity training program for dietitians and other professionals working at customized home visiting health services (CHVHS). This program focused on nutrition services for hypertension or diabetes mellitus patients including topics regarding CHVHS, and composed of 10 sessions with lectures, discussion and practice. Dietitians (n = 54) and other professionals (n = 20) participated in the program and completed the questionnaire to assess their understanding of nutritional management, nutrition services and CHVHS before and after the program, and to examine program satisfaction and education needs. Subjects were mostly women (98.6%) and college or university graduates (93.2%). Total score (p < 0.001), as well as all items (p < 0.001 or p < 0.01) of understanding regarding nutritional management, nutrition services and CHVHS, were significantly increased after the program both in dietitians and in other professionals. Subjects were generally satisfied with the program, showing more satisfaction with items regarding subject's participation, acquiring new knowledge, usefulness of the program for CHVHS, and education materials. In future nutrition capacity training programs, subjects wanted to have classes regarding nutrition services for specific chronic diseases, development of education materials, methods for dietary life education, modifying eating habits and so on. Other professionals compared to dietitians, showed higher education needs in meal management (p < 0.01) and nutrition counseling skills (p < 0.05). This study showed the effectiveness of a nutrition capacity training program for home-visiting dietitians and other professionals, and suggests the need and direction for future nutrition capacity training programs.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.172-181
• /
• 1993

Pseudo-Brayton cycle is defined as an ideal Brayton cycle admitting the difference between heat capacities of working fluid during heating and cooling processes. The endo-pseudo-Brayton cycle which is a pseudo-Brayton cycle with heat transfer processes is analyzed with the consideration of maximum power conditions and the results were compared with those of the endo-Carnot cycle and endo-Brayton cycle. As results, the maximum power is an extremum with respect to the cycle temperature and the flow heat capacities of heating and cooling processes. At the maximum power condition, the heat capacity of the cold side is smaller than that of heat sink flow. And the heat capacity of endo-Brayton cycle is always between those of heat source and sink flows and those of the working fluids of pseudo-Brayton cycle. There is another optimization problem to decide the distribution of heat transfer capacity to the hot and cold side heat exchangers. The ratios of the capacies of the endo-Brayton and the endo-pseudo-Braton cycles at the maximum power condition are just unity. With the same heat source and sink flows and with the same total heat transfer caqpacities, the maximum power output of the Carnot cycle is the least as expected, but the differences among them were small if the heat transfer capacity is not so large. The thermal efficiencies of the endo-Brayton and endo-Carnot cycle were proved to be 1-.root.(T$_{7}$/T$_{1}$) but it is not applicable to the pseudo-Brayton case, instead it depends on comparative sizes of heat capacities of the heat source and sink flow.w.