• 한국식품조리과학회지
• /
• 제31권1호
• /
• pp.33-40
• /
• 2015

For the globalization of Korean food restaurants, the kitchens should be equipped with proper ventilation systems and space to keep clean and ensure food safety. This study aimed to examine the ratio of kitchen to total space of restaurant and the suitability of the ventilation systems employed at Korean food restaurants. Data were collected by on-site survey of 12 Korean foods restaurants in Seoul. Length and width of the restaurants were measured with scale. Temperatures and air velocity around the heating equipment, working area, and hood were measured with a thermal imaging camera anemometer and thermometer. Statistical analyses were conducted with the SPSS program. The average space of the restaurants was $25.7m^2$. The ratio of kitchen to space was 0.22 for restaurants sized $32m^2$, 0.28 for $33-66m^2$, 0.21 for $66.1-99m^2$, 0.16 for $99.1-148.5m^2$, and 0.35 for those above $148.5m^2$. Average maximum and minimum air velocity around the hood were 0.28 m/sec and 0.22 m/sec, respectively. Under these conditions, the temperature of the working area was $41^{\circ}C$, presenting an uncomfortable indoor temperature for kitchen employees to work. When classifying 3 groups based on the minimum and maximum air velocity, the temperatures near the cooking area and in the hood of the restaurants showed significant differences among the three groups. When the maximum air velocity was over 0.3 m/sec, the temperature of the cooking area was as $30.1^{\circ}C$, showing a significantly lower temperature (p<0.01). Based on these results, the kitchen space rate of 0.25 to the total space and a ventilation system maintaining a maximum air velocity over 0.3 m/sec were recommended for ensuring the food safety of Korean foods restaurants sized 66 to $99m^2$.

• 한국농공학회지
• /
• 제14권1호
• /
• pp.2535-2548
• /
• 1972

Instead of fertilizing the lands they moved to find other fertile lands and lived a feudal life agriculture and various machincs played a main role in the land reclamation. The best method of land clearing, the time and capacity in the operation and the effect of growing crops should systematically analized prior to the time of 3rd Five-year Economic Development(1972-1976) in order to cultivate 210,000ha of wasteland or the modernization of our country. The present study was investigated to find out a new working-system of mechanical land clearing and development of fertile soil. The results are as follows: 1) The first stage of productive power increases when weeds were mixed soil in the land clearing work in order to supply organic materials and to make soil swollen instead of burning or just removing. 2) The equipments such as bulldozers, harrows, power tillers and so on should be prepared in order to do a systematic work in the land clearing. 3) The work of pulling-up roots is dependent upon the forms of roots spreading under the ground. The work of the pulling-up of the straight roots was most difficult. But before the roots are pulling-up we do not know the forms of roots. 4) The cutting of soil from upside to under side land clearing method (II) Spent 6 hr 7 min 43 sec per 1 Danbo in doing land clearing and control method spent 4 hr 52 min 30 sec per 1 Danbo in doing land cearing. No significant difference could be found between II treatment type and I treatment type. 5) The volume of soil carried by bulldozer $270.38m^3$ per 1 Danbo in I type and in II type, $368.58m^3$ per 1 Danbo or about 36% increased in II type then in I type. But that is not a significant difference when considering the whole productive power of soil. 6) The land clearing of terrace by bulldozers cannot escape making the embankment slope of about $45^{\circ}$, and 25.3% should be decreased in the area. It is recommended to make use of the embankment slope by planting grass for cows. 7) The time of retary tilling increased 2.3 times or 1 hr 42 min 22 sec per 1 Danbo compared to the timesrequired in the harrowing. Because it mixed the Organic matter on ground and the harrowing of subsoil. 8) The havest of pasture growing on the land reclamation in natural slope is as follows. (a) The none fertilizers with reclaimed block of productivity decresed 1/10 than that of the farmland. Therefore the none fer tilizing in the cultivated pasture is unprofitable. (b) The havest of the manured IV treatment block was the best not only in the kinds of fertilizers but also in the kinds of pasture grass.

• Journal of Biosystems Engineering
• /
• 제38권2호
• /
• pp.73-80
• /
• 2013

Purpose: This study was conducted to compare tillage and loads characteristics of three types of rotavators in farmland working condition of Korea. Methods: Tillage operations using three types of rotavators, i.e. rotary-type, crank-type and plow-type, were carried out in a dry field of Korea. The same prime mover tractor was used for driving three types of rotavators, and under several operational conditions, tillage characteristics such as actual working speed, rotavating depth, rotavating width, actual field capacity, flow of tilled soil, soil inversion ratio, and pulverizing ratio were measured. In addition, loads characteristics like torque and required power of Power Take-Off (PTO) shaft were calculated. Results: The average rotavating depth was smaller than the nominal value for all rotavators, and the difference was the greatest in the plow-type rotavator. Nevertheless, the plow-type rotavator showed the largest rotavating depth. The rotavating width was the same as the nominal value of all rotavators. The flow of tilled soil at the same operational conditions was the greatest in the plow-type rotavator and was the smallest in the rotary-type rotavator. In the most commonly used gear conditions of L2 and L3, the average soil pulverizing ratio was the greatest in the rotary-type rotavator, and followed by crank-type and plow-type rotavators in order. In the gear L2 and L3, the plow-type rotavator also had the lowest average soil inversion ratio while the rotary-type and crank-type rotavators had the same soil inversion ratio each other. The average torque and power of PTO shaft in the gear L2 and L3 were the highest in the plow-type rotavator. The load spectra of PTO shaft applying rain flow counting method and Smith-Waston-Topper equation to the measured torque showed that the modified torque amplitude was the greatest in the crank-type rotavator. This may come from the large torque fluctuation of crank-type rotavator during tillage operations. Conclusions: The three types of rotavators had different tillage and loads characteristics. The plow-type rotavator had the deepest rotavating depth, the smallest soil inversion ratio, the largest soil pulverizing ratio and required PTO power. Also, the crank-type rotavator showed a large torque fluctuation because of their unique operational mechanism. This study will help the farmers choose a suitable type of rotavator for effective tillage operations.

• 대한치과기공학회지
• /
• 제8권1호
• /
• pp.5-16
• /
• 1986

In order to provide the better and more effective dental health service, the study for manpower of dental laboratory technician with some relevant factors such as institutions for education and training, employment status and distribution of technicians, etc. was carried out through survey for 3,885 licensed technicians during 1965 - 1985. Results were obtained through the study as follows: 1. There are 14 junior health colleges in Korea and 3,106(79.9%) licensed dental technicians out of 3,885 graduated from health colleges and rest of them obtained their licenses through practical training in dental clinics. 2. 8,030 applicants have applied to the national examination which was carried out for 22 times during 1965 - 1985. The passing rate in the examination for 22 times showed 48.3% in average. 3. The dental technicians are working mostly in 404 dental laboratories and 2,522 dental clinics and hospitals through out the country. However, most technicians are dominantly working in large citis, because 255 (63.1%) dental laboratories and 1,537 (60.9%) dental clinics and hospitals are mainly located in Seoul and Busan. 4. Regarding distribution of the dental technician, 1,126(52.1%) technicians have been employed in the dental institutions, however, 530 (24.5%) could not have a job and the rest of them (504 technicians: 23.3%) were in leave absence from military service, travelling abroad and unknown reasons. 5. Through reference review, it was found that there were 95,886 dental technician (9/ 100,000 population) in the world during 1973$\sim$1977. However, 91,553 dental technicians lived in the developed countries (14/100,000 population)) also ratio between the dentist and the dental technician in the world showde 1:0.38. In such coentries where per capita income showed $100 in average, the distribution of the dental technician showed 0.272 per 100,000 population. 6. In an estimation of demand and supply for the dental technicians by the year from 1985 through 1996 in Korea, the supply is estimated by the capacity of educational institutions as over-production even through such estimation based on the future incresing of GNP and ratio between the dentist and the dental technicianas and also ratio between the dental technician and general population. At present such ratio shows less compared with the developed contries, however, it is estimated as over-supply in 1994.

• 문화기술의 융합
• /
• 제7권4호
• /
• pp.491-501
• /
• 2021

본 연구는 근무지 형태에 따른 요양보호사의 직무인식과 교육요구도를 파악하여 비교 분석함으로써 노인요양 서비스의 전문성 강화를 위한 직무교육 프로그램 개발의 근거를 제공하고자 한다. 연구방법: B 광역시의 노인의료복지시설, 노인주거복지시설, 재가복지시설에서 근무하고 있는 177명의 요양보호사를 대상으로 2019년 4월부터 7월까지 자료를 수집하였고, SPSS Win 21.0 Statistical Program을 사용하여 분석하였다. 연구결과: 노인의료복지시설, 노인주거복지시설, 재가복지시설 요양보호사는 요양보호사의 직업윤리와 자세에 대한 직무인식정도가 가장 높았고, 교육요구도는 노인의료복지시설 요양보호사는 요양보호사의 직업윤리와 자세, 노인주거복지시설 요양보호사는 요양보호 업무 기록 및 보고, 재가복지시설 요양보호사는 요양보호사의 직업윤리와 태도가 가장 높았다. 결과: 근무지별에 따른 요양보호사의 역량강화를 위한 차별화된 직무교육이 요구되며, 초급 요양보호사가 수행하는 직무와 숙련 요양보호사가 수행하는 직무를 구분하여 교육해야 될 것이다. 또한, 요양보호사 스스로가 전문가로 거듭날 수 있는 전문성 향상과 요양보호서비스의 질 확보를 위한 노력을 기울여야 할 것이다.

• 콘크리트학회논문집
• /
• 제20권1호
• /
• pp.3-11
• /
• 2008

현재 국내에서 건설되고 있는 대부분의 아파트는 철근콘크리트 전단벽과 바닥슬래브만으로 구성된 순수벽식구조 형태를 이용하고 있다. 이러한 벽식 구조 아파트에 대한 리모델링시 개구부 설치는 필연적이며 개구부 설치치 벽체의 거동은 매우 복잡하며, 연결부재인 보와 슬래브 같은 부재에 많은 영향을 받는다. 본 연구에서는 개구부가 있는 전단벽에 대해 횡하중 실험을 실시하였다. 실험체는 1980년대에 지어진 벽식 구조아파트를 대상으로 1/2축소 실험체를 제작하였다. 개구부의 면적 및 연결 슬래브의 위험단면은 기존 연구를 참고하여 결정하였다. 실험 결과 개구부 설치에 따른 내력 감소가 나타났으며, 연결 슬래브의 응력은 전단면에 대하여 균일하게 작용하지 않았다. 전단벽체와 커플링 작용을 하는 슬래브의 유효폭 및 위험단면은 기존 연구와 비교하여 큰 차이점을 나타냈으며, 국내의 아파트에 적용하기에는 다소 과소평가되고 있는 것으로 나타났다.

• 대한영양사협회학술지
• /
• 제9권3호
• /
• pp.219-232
• /
• 2003

The purposes of this study were to assess the child care centers' foodservice facility, and to develop the kitchen facility model based on the general sanitation standards and guidelines in order to provide basic information for a plan review to build or renovate child care centers' foodservice facility. The scopes of the study include : 1) field assessment of the foodservice management practices and facilities in 8 public child care centers, and 2 private child care centers which they are subsidized from the government as public child care centers, 2) development of child care centers' kitchen facility model based on the General Sanitation Standards and Guidelines. The results of this study can be summarized as follows : 1. Field Assessment of the Child Care Centers' Foodservice Facility Average number of children in child care centers was 78.0$\pm$24.20, the average space of kitchen was 15.13$\pm$4.25($m^2$). Especially, the average space of kitchen was 18.49$\pm$4.35($m^2$) with enrollment capacity of 90～120 children in child care centers. The inventory level of most foods was relatively low except rice and kimchi. Kitchen facilities and equipments were similar to those of home kitchen and did not meet the standards of institutional practice. Therefore, the director in child care centers should recognize the importance of the sanitation management and pay more attention to the renovation of foodservice facilities as well as sanitation management practices. 2. Development of the Kitchen Facility Model based on the General Sanitation Standards and Guidelines The kitchen facility plan model with enrollment capacity of 100 children was developed based on the results of field assessment and literature review. Suggested kitchen space was 34.16$m^2$(6,100mm×5,600mm). This space was bigger than the results of field survey or precedent study, considered appropriate to implement the general sanitation standards. The main feature of the developed kitchen facility plan and model was product flow in one direction from the arrival of the raw material to the finished product in order to prevent cross contamination and to improve working efficiency.

• 감성과학
• /
• 제20권2호
• /
• pp.127-136
• /
• 2017

주의 깜박임이란 RSVP상에서 두 개 이상의 표적을 탐지할 때 먼저 제시 된 표적(T1)에 대해서는 정확성이 높지만 이후 500ms 이내의 표적(T2)에 대해서는 체계적으로 수행이 저하되는 현상을 말한다. 이를 설명하는 이론들은 주의용량결핍 모형과 주의여과지연 모형으로 분류할 수 있다. 한편, 시각적 주의 용량은 좌우 시각영역에서 독립적으로 작용하는 반시야 독립성으로 인해 다양한 과제에서 양측영역이득이 나타난다고 알려져 있다. 본 연구는 주의 용량의 반시야 독립성을 이용하여 주의 깜박임을 설명하는 두 갈래의 이론을 검증하였다. 실험 1은 T1과 T2를 포함하는 두 개의 RSVP를 양쪽 시야 영역에 나누어 제시하거나 한쪽 시야 영역에 제시하여 주의 깜박임과 양측영역이득간의 상호작용을 검증하였다. 실험 2는 하나의 RSVP에서 T1을 제거함으로써 양쪽 시야 영역에 T1과 T2가 독립된 주의용량을 사용할 때에도 주의 깜박임이 나타나는지 확인하였다. 그 결과 두 개의 RSVP를 양쪽 시야 영역에 나누어 제시하였을 때 더 우수한 수행을 보여주었으나 (즉, 양측영역이득) 주의 깜박임과 양측영역이득의 상호작용은 나타나지 않았다. 또한, T1이 제시되지 않은 RSVP의 T2에서도 주의 깜박임 현상을 관찰할 수 있었다. 이 결과들은 주의 깜박임에 대한 주의여과지연 모형을 지지한다.

• 한국건설관리학회논문집
• /
• 제17권6호
• /
• pp.31-39
• /
• 2016

본 논문은 S대학교 대학원에서 수행하고 있는 '글로벌 건설 엔지지어링 고급인력 양성 사업'에 대한 중요도-만족도 분석을 실시하고 이를 토대로 교육프로그램의 효과성을 제고하는 방안을 제안하는 것을 목적으로 한다. 최근 해외건설시장은 매년 증가 추세를 보이고 있으며, 특히 사업타당성 분석 등과 같이 부가가치가 높은 사업의 기획단계에서의 역량강화가 강조되고 있다. 하지만 국내 시공 및 엔지니어링사들의 고부가가치분야의 역량은 여전히 부족한 것으로 평가되고 있다. 이를 극복하기 위해 국토교통부는 해외 건설시장에 필요한 역량인 기획, 관리, 금융, 설계 등 고부가가치분야 역량을 갖춘 전문가 양성을 목적으로 '글로벌 건설 엔지니어링 고급인력 양성' 사업을 시작하였다. 이에 2014년 특성화 대학원 2곳(S대학교, C대학교)을 선정하여 인력양성을 사업을 수행하고 있다. 위 사업의 목적인 해외건설 시장에서 글로벌 경쟁력을 갖추고 질적으로 우수한 고부가가치분야 전문가를 양성하기 위해서, 지속적으로 교육프로그램의 만족도 분석이 실시되어야 한다. 본 논문에서는 중요도-만족도 분석(Importance Satisfaction Analysis, ISA)을 통하여 인력양성 프로그램 대상자들의 소요를 효과적으로 파악하고, 도출된 개선안을 통해 '글로벌 건설 엔지니어링 고급인력 양성 프로그램'의 만족도를 제고할 수 있을 것으로 기대된다.

• 대한토목학회논문집
• /
• 제33권5호
• /
• pp.1765-1775
• /
• 2013

콘크리트 공시체의 압축강도와 연성성능을 향상시키기 위하여 FRP 와이어의 적용을 실험적으로 연구하였다. 와이어 보강겹수와 콘크리트 압축강도의 변화가 고려된 와이어 보강 공시체의 압축실험을 실시하였다. FRP 와이어 보강 공시체 압축실험에서 측정된 축방향변형률, 원주방향변형률, 체적변형률에 의한 와이어 내부 콘크리트의 손상상태를 분석하여 와이어 보강효과를 평가하였다. FRP 와이어 보강 공시체의 응력-변형률 선도는 두 개의 직선구간과 변환구간으로 구성된 것으로 측정되었으며, 균열이후구간에서 응력상승거동하였다. 와이어 보강 공시체의 균열강도와 최대강도는 와이어 보강겹수에 비례하여 증가하는 것으로 평가되었다. 와이어가 3겹 보강된 35 MPa 공시체의 최대강도는 무보강 공시체의 압축강도보다 286% 높게 측정되었다. FRP 와이어 보강 공시체의 내부 콘크리트 파괴형태는 i) 수직균열 또는 경사균열파괴; ii) 수평균열파괴로 구분되었다. 특히, 수평균열파괴는 와이어에 의한 구속약화로 인하여 갑자기 내부 콘크리트가 팽창하는 부분과 와이어가 아직 내부 콘크리트를 효과적으로 구속하는 부분의 전단효과로 발생하였으며, 수평균열은 공시체의 중앙부를 기준으로 여러 면으로 발생하였으며, 와이어에 의한 구속효과가 우수한 공시체에 발생하였다. FRP 와이어 보강 공시체 압축실험에서 와이어 최대파단변형률에 대한 인장파단변형률의 비가 55-90%로 측정되었으며, 평균 69.5%로 나타났다. 이는 일반 FRP 시트 보강 공시체 실험에서 측정된 시트 파단변형률보다 다소 높은 값으로 FRP 와이어 보강 공법의 우수성을 입증한다.