• The Journal of Korean Society for School & Community Health Education
• /
• v.1 no.2
• /
• pp.17-27
• /
• 2000

This Study carried out for the purpose of basic data collection school teachers in Korea during September 2000 at Seoul, Kangwon province and JeonRaBuk province. 534 teachers among 600 school health teachers was analyzed by SPSS program. The major findings is as follows; 1. Mean score of Job-satisfaction is $25.52{\pm}4.46$ as 50 total point. Staff cooperation $2.96{\pm}.93$ is the highest score and promotion system $2.02{\pm}1.06$ is the lowest score as 5 total point by Job-satisfaction factor 2. Age-specific mean scores are $20.63{\pm}4.44$ at age of $20{\sim}29$, $25.77{\pm}4.15$ at age of $30{\sim}39$, $27.69{\pm}4.63$ at age of $40{\sim}49$ and $27.11{\pm}5.26$ at age of more than 50. 'Promotion', 'Health education', 'Cooperation of school physician', 'Allocation of professional' and 'Professional skill' are significantly different by age group. 3. Job-satisfaction of long period working teachers is higher than that of short workers, 'Salary system' and 'Professional skill' by factor are significantly different. 4. Job satisfaction by area is not significantly different, and 'Professional skill' as a factor of urban is higher than rural area. 5. Job-satisfaction by school level is not significantly different, and 'Health budget', 'Cooperation of school physician', 'Allocation of professional' and 'Professional skill' are significantly different by level of school. 6. Job-satisfaction of big size school is higher than that of small school and 'Health education' of big size school is high. 7. Job-satisfaction of low education is low score and 'Salary', 'Textbook for health education', 'Health facility' and 'Professional skill' are differnt. 8. 'Educational background', 'Size of school' and 'Level of school' are significantly affected to 'Salary system', this three varialbles explained 13.8% of the total. We can express job -satisfaction of 'Salary system' ; y=2.677-$.182X_6$(Education)+$.120X_5$(Size of school)+$.019X_4$(Level of school) 9. 'Age group', 'Working period' and 'Size of school' are affected to 'Cooperation of school physician', and three variables explain 13.2% of total. We can express job-satisfaction of 'Cooperation of school physician' ; y=2.644+$.247X_1$(Age)+$.179X_2$(Working period)-$.133X_5$(Size of school) 10. 'Working period', 'Education of teacher', and 'Working area' are affected professional skill, this three variables explain 13.5% of job-satisfaction of professional skill. We can express 'Professional skill' ; y=3.076+$.11X_2$(Working period)-$1.06X_6$(Education)-$.126X_3$(Working area). 11. 'Education', 'Age', 'Size of school' and 'Working period' are affected to total job-satisfaction, this four variables explain 14.2% of total satisfaction. We can express job-satisfaction of school health teacher; y=19.76-$.126X_6$(Education)+$.215X_1$(Age)+$.107X_5$(Size of school)+$.121X_2$(Working period).

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.562-565
• /
• 2000

For solving problems of manpower and improving working environment, Robot System have been introduced. In the past, Robot System was adopted mass production, indoor factory condition, but present Robot System is applied to many other fields. This applied field is Robot System was adopted fruit harvest, maintenance, and so on. The developed Multi-Linked Lifter is applied to eminant multi-purpose working. The purpose of this study is to develop control algorithm for this equipment composed of multi-linked manipulator.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.04a
• /
• pp.334-340
• /
• 1991

The information with regard to the working rance of lathe, cutting tool, cutting condition is managed as detabase system for turning operation. Date with regard to the working range of lathe, cutting tool, cutting condition are stroed by the DBMS(Data Base Management System) and can be added, modified, deleted and retrieved. Data stored in database system are searched to select the most proper cutting tool and cutting condition with the input data fed from the design stage. The system developed in this work is operated by the pull down menu on the IBM PC/AT personal computer, or compatible series.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.03a
• /
• pp.183-187
• /
• 1996

On the machine measuring system composed of touch trigger probes, a DNC module, a CMM module, an analysis module and a man-machine interface unit was developed. Measuring accuracy is affected by working accuracy of the on the machine measuring system. The working accuracy of the system is due to geometric errors of th machine tool, servo errors of feed drives and positioning errors of probes. In order to compensate for the measuring errors due to the working accuracy, a calibration module was developed. The measuring automation system was realized with the on the machine measuring system and an IBM-PC on the machine center through a RS-232C. It turns the machining machine (CMM). The system is used for dimensional checking of machined components. initial job setup, part identification, identification of machining errors due to deflection and wear of tools. cutter run out, and calibration of machine tools. A horizontal machining center equipped with FANUC OMC wre used for verification of the system. The validity and reliability of the system. The validity and reliability of the system were confirmed through a series of experiments with gage blocks, ring gages, comparison measurement with a commercial CMM, and so on.

• Journal of Power System Engineering
• /
• v.12 no.3
• /
• pp.12-18
• /
• 2008

In the present study, the numerical simulation has been performed to investigate K-factor for temperature variation of working fluid in spray nozzle with orifice. The commercial CFD software, Fluent with the proper modeling was applied for analyzing the internal of the spray nozzle. Numerical result for K-factor at $20^{\circ}C$ agrees with the experimental result that it applied n=0.5 within about 7% error. The pressure drop inside nozzle is showed 20% passing swirler, 70% in the region between the outlet of swirler and the orifice and 10% at the outlet of orifice. As the operating pressure is increased, K-factor is decreased by effect of flow resistance at it's inlet before pass swirler. The temperature increase of working fluid reduced the flow rate according to reducing of density, and average 1.23% decrease is showed in the present research.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.1
• /
• pp.7-14
• /
• 2017

Due to the recent advances in Phage-Change Memory (PCM) technologies, a new memory hierarchy of computer systems with PCM is expected to appear. In this paper, we present a new page replacement policy that adopts PCM as a high speed swap device. As PCM has limited write endurance, our goal is to minimize the amount of data written to PCM. To do so, we defer the eviction of dirty pages in proportion to their dirtiness. However, excessive preservation of dirty pages in memory may deteriorate the page fault rate, especially when the memory capacity is not enough to accommodate full working-set pages. Thus, our policy monitors the current working-set size of the system, and controls the deferring level of dirty pages not to degrade the system performances. Simulation experiments show that the proposed policy reduces the write traffic to PCM by 160% without performance degradations.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.6 no.2
• /
• pp.23-28
• /
• 2010

Fluent ver.6.3 is used as CFD(Computational Fluid Dynamics) simulator to predict the performance of snow-melting system by geothermal pipes energy. As the results of this simulation, it is clearly shown that $50^{\circ}C$ of working fluid in to geothermal evaluated as more effect comparing to $45^{\circ}C$ of working fluid. The Surface temperature is come to $5^{\circ}C$ at 1m/s speed and $50^{\circ}C$ temperature of the working fluid.

• Textile Coloration and Finishing
• /
• v.25 no.2
• /
• pp.140-151
• /
• 2013

In order to investigate the mechanical properties of working clothes materials considering industrial settings, the test weaving materials were compared with the existing materials depending on the season. The material design of the test fabrics were changed through fineness, composition, density of materials then subsequently treated with functional finish. As a result of evaluation of the forms according to KES-FB system, Koshi was deduced, and Numeri and Fukurami were increased. Thereby, the test weaving materials became flexible, surface became smoother, elasticity and volume characteristics indicated to have been improved. Consequently, the THV value of working clothes materials for test weaving was increased compared to existing materials which indicated improved result of the total hand value. Specially, the winter cloth material indicated improved drape characteristics and dimensional characteristics, showed improved liveliness as being compressed softly.

• Journal of Power System Engineering
• /
• v.20 no.2
• /
• pp.79-84
• /
• 2016

The thermodynamic performance of ocean thermal energy conversion with 1 kg/s geothermal water flow rate as a heat source was evaluated to obtain the basic data for the optimal design of cycle with respect to the classification of the working fluid. The basic thermodynamic model for cycle is rankine cycle and the geothermal water and deep seawater were adapted for the heat source of evaporator and condenser, respectively. R245fa, R134a are better to use as a working fluid than others in view of the use of geothermal water. It is important to select the proper working fluid to operate the ocean thermal energy conversion. So, this paper can be used as the basic data for the design of ocean thermal energy conversion with geothermal water and deep seawater.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.1
• /
• pp.135-142
• /
• 2006

The package loading process of tile lumbering industry is an operation that after a pair of workers binds three or six lumber into a unit and cut the both ends of the lumber, carry and pack and load the weight cargo of 30-50kg. The package loading process causes lots of noise and wood dust when the lumber are cut and brings about the main cause of the musculoskeletal disorder when workers carry the heavy goods. Therefore, we developed the monolithic package loading equipment cutting both ends that is enable to improve the working method and environments of the existing package loading process. The noise and wood dust were reduced by developing the device and the main cause of shirking duties on working place was solved by preventing the musculoskeletal disorder and improving the working environments as excluding the work of carrying heavy goods.