• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.5
• /
• pp.546-553
• /
• 2015

Recently, flash cache is widely adopted as the performance accelerator of legacy storage systems. Unlike other cache media, flash cache should be carefully managed as it has peculiar characteristics such as long write latency and limited P/E cycles. In particular, we make two prominent observations that can be utilized in managing flash cache. First, a serious worn-out problem happens when the working-set of a system is beyond the capacity of flash cache due to excessively frequent cache replacement. Second, more than 50% of data has no hit in flash cache as it is a second level cache. Based on these observations, we propose a cache admission control policy that does not cache data when it is first accessed, and inserts it into the cache only after its second access occurs within a certain time window. This allows the filtering of data disruptive to flash cache in terms of endurance and performance. With this policy, we prolong the lifetime of flash cache 2.3 times without any performance degradations.

• Journal of Korean Society of Forest Science
• /
• v.99 no.2
• /
• pp.197-203
• /
• 2010

The data of average temperature, average relative humidity, precipitation and average wind speed were collected from 674 meteorological stations in China. A specific procedure that processes original data into a new data format needed in forest fire danger rating forecast system of China was introduced systematically, and the feasibility of this method was validated in this paper. In addition, a set of meteorological data processing software was constructed by the secondary development of GIS in order to realize automation of processing data for the system. Results showed that the approach preformed well in handling temperature, average relative humidity and average wind speed, and the processing effect of precipitation was acceptable. Moreover, the automated procedure could be achieved by GIS and the working efficiency was about 3 times as much as that of manual handling. The informationization level of processing meteorological data was greatly enhanced.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.6
• /
• pp.584-590
• /
• 1984

This study is to develop a program, with which the motion of the system can be simulated in view of kinematics and dynamics, and then evaluate functional capabilities of many robots in order to select the most suitable one for any given working conditions. According to the theory of Denavit & Hartenberg, rectangular coordinate is set at each joint in the robot of six joints, as this one is the major concern, and transformation matrices are derived between any two coordinates. The necessary displacement of each joint for executing a given a work is obtained from the position and posture transformation and the in-stantaneous velocity of the joint is got from given velocity distribution of the path. The necessary torque of each joint is finally calculated by Newton-Euler Method. This simulation program is applied to a robot with six rotational joints, Rotational angle and torque to time which has a given motion trajectory are figured and also torque to r.p.m.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.5
• /
• pp.170-175
• /
• 2013

For this study, the domestically developed bootstrap reservoir of the aircraft is set up in accordance with the temperature and humidity conditions depicted on the qualification test, and the variation in the internal pressure of the bootstrap reservoir of the aircraft is examined. The study shows that the bootstrap reservoir has less variation in the internal pressure at room temperature than at low temperature($-40^{\circ}C$). As a result, the internal pressure can be maintained stably when the temperature of working fluid in the bootstrap reservoir and the atmosphere environment is over room temperature($25^{\circ}C$). Therefore the keeping of temperature above room temperature is very important to operate the bootstrap reservoir of the aircraft properly.

• Journal of applied mathematics & informatics
• /
• v.5 no.3
• /
• pp.717-734
• /
• 1998

In the present paper is presented a new matrix pencil-based numerical approach achieving the computation of the elemen-tary divisors of a given matrix $A \in C^{n\timesn}$ This computation is at-tained without performing similarity transformations and the whole procedure is based on the construction of the Piecewise Arithmetic Progression Sequence(PAPS) of the associated pencil $\lambda I_n$ -A of matrix A for all the appropriate values of $\lambda$ belonging to the set of eigenvalues of A. This technique produces a stable and accurate numerical algorithm working satisfactorily for matrices with a well defined eigenstructure. The whole technique can be applied for the computation of the first second and Jordan canonical form of a given matrix $A \in C^{n\timesn}$. The results are accurate for matrices possessing a well defined canonical form. In case of defective matrices indications of the most appropriately computed canonical form. In case of defective matrices indication of the most appropriately computed canonical form are given.

• Education of Primary School Mathematics
• /
• v.8 no.1
• /
• pp.13-22
• /
• 2004

There were a lot of challenges to reform mathematics education. These challenges may include reforms of teaching and learning methods, development of mathematics curriculum and textbooks, innovative resources for teaching mathematics. Although there is considerable consensus that meeting these challenges will require that mathematics teachers have deep insights about mathematics, about students as learners of mathematics, and about teaching method, the teachers themselves may have little knowledge of them. The most of the professional development includes elective participation in reeducation course, workshop, and special lectures which designed to transmit a specific set of ideas, techniques, or materials to teachers. But such approaches treat mathematics teaching as routine and technical, and also provide limited opportunities for meaningful interactions within the teaching community. So, this paper suggests that what is needed to develop professional teachers of mathematics is community where teachers work with colleagues rather than working alone.

• Journal of Mechanical Science and Technology
• /
• v.18 no.2
• /
• pp.193-202
• /
• 2004

This paper presents a computer method for the dynamic analysis of a system of rigid bodies in plane motion. The formulation rests upon the idea of replacing a rigid body by a dynamically equivalent constrained system of particles. Newton's second law is applied to study the motion of the resulting system of particles without introducing any rotational coordinates. A velocity transformation is used to transform the equations of motion to a reduced set. For an open-chain, this process automatically eliminates all of the non-working constraint forces and leads to an efficient integration of the equations of motion. For a closed-chain, suitable joints should be cut and few cut-joints constraint equations should be included. An example of a closed-chain is used to demonstrate the generality and efficiency of the proposed method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.204-208
• /
• 1992

The purpose of this research is to construct the experimental test set-ups and establish a series of performance test program for the domestically developed fluid couplings, and to provide a software to store and utilize these experimental data which can be used to improve the performance of the fluid coupling and solve on the job problems confronted in operation. The performance test consists of taking measurement of torque rpm and efficiency of the fluid coupling for three different amount of working fluid inside with various loads to the output shaft and finally investigating the torque rpm and efficiency characteristics of the fluid coupling with respect to these parameters. The results of this study can contribute valuable references tot the development of variable speed fluid coupling and torque converter currently pursued by the domestic industry.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.3
• /
• pp.82-84
• /
• 2008

A surface encoder based on the Half-shaded square pattern (HSSP) is presented. The HSSP working as reference grid is composed of the straight lines which are easy to be fabricated and make measuring time short. Since the periodic cell is separated in ON/OFF by the $45^{\circ}$ straight line, the duration from the starting point of scanning to the first rising edge and the duty cycle of the pulse train vary with respect to the position of the starting point. And the relationship between X and Y position and the duration, and duty cycle is described in the simple linear equation. Therefore, it is possible to measure X and Y position with the measured duration and duty cycle without calculating load. Through the test set-up, the feasibility of the proposed surface encoder was verified. Also the future works for improvement of performance were suggested.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.500-507
• /
• 2006

Recently, the structural design code has been changed and every buildings, which have more than three floors or wider area than 1,000m2, should be designed to be able to resist earthquakes. However, most structural engineers are working in some big cities and this physical distance would set a barrier between structural engineers and architects. As a result, most row-rise buildings in small cities are designed and constructed without structural design or the consulting by structural engineers. The purpose of this research is to develop an web-based structural design environment in which structural design and consulting can be performed efficiently through on-line communication without off-line meetings or documents. In addition to the on-line communication, the system has a integrated structural design module which supports all the process of structural design and can increases the productivity of structural design work.