• 연구논문집
• /
• 통권28호
• /
• pp.73-87
• /
• 1998

A pneumatic control system of compressed air as a working fluid has a variety of advantages such as low price, high respondence, non-explosion and good control performance and thus has many applications in the field of automobile, electronic and semiconductor industry. However, it has a difficulty in contolling a precise position due to quick response of system and compressibility of working fluid and. in particular, shock stress may occur due to an external load, resulting in fracture of a cylinder cap unless cushion device is equipped in the linear actuator. To avoid this, a cushion device should be installed for damping effect of the external load and the supply pressure as well as for decreasing shock stress and vibration caused by high speed rotation. Previous studies include dimensionless analyses and computer simulations of cushion capability and experiments of horizontally-mounted cylinder performances. A new attempt is experimentally made in this study using a vertically-mounted cylinder under an operation condition of 4, 5 and 6 (bar) as supply pressure and 40, 70 and 100 (kgf) as external load. It turns out that the cushion pressure is mainly a function of the external load rather than the supply pressure. The cushion characteristics was also revealed in the meter-in circuit.

• 항공우주기술
• /
• 제5권2호
• /
• pp.181-187
• /
• 2006

본 연구에서는 PSD (POGO 억제장치) 성능 시험을 위해 구축한 시험설비에 대한 내용을 다룬다. PSD 성능 시험 장치는 공급관 전체 가진 방식과 작동 유체 가진 방식으로 구분할 수 있으며, 작동유체 가진 방식은 다시 피스톤 방식과 면적제한 방식으로 분류할 수 있다. 면적 제한 방식 가진기가 기초 연구에 적합하며, 이를 채택한 PSD 성능시험장치를 제시하였다. 가진기로는 삼각함수 형태의 섭동을 줄 수 있는 판형 가진기와 볼 밸브형 가진기가 고려되었으며, 누수 문제를 고려하여 볼 밸브형 가진기가 채택되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.65-69
• /
• 2004

The small form factor optical data storage devices are developing rapidly nowadays. Since it is designed for portable and compatibility with flash memory, its components such as disk, head, focusing actuator, and spindle motor should be assembled within 5 m thickness. The thickness of focusing actuator is within 2 mm and the total working range is $+/-100{\mu}m$, with the resolution of less than $1{\mu}m$. Since the thickness is limited tightly, it is hard to place the yoke that closes the magnetic circuit and hard to make strong flux density without yoke. Therefore, Halbach array is adopted to increase the magnetic flux of one side without yoke. The proposed Halbach array type focusing actuator has the advantage of thin actuation structure with sacrificing less flux density than conventional magnetic array. The optical head unit is moved on the swing arm type tracking actuator. Focusing coil is attached to swing arm, and Halbach magnet array is positioned at the bottom of deck along the tracking line, and focusing actuator exerts force by the Fleming's left hand rule. The working range and resolution of focusing actuator are analyzed with FEM and experiment.

• 한국기계가공학회지
• /
• 제14권4호
• /
• pp.28-33
• /
• 2015

In this study, the optimal design for the support and the binding device for the protection of crops for the maximum allowable stress of the shape necessary to minimize volume has been proposed. Optimization of the support and the binding device for the crops should be designed to support businesses in terms of profit, in part to reduce the material, and to profit from the ease and speed of working that part of the farmers. We used CATIA for the mechanical design and the ANSYS program for the structural analysis. Additionally, the optimization was performed by PIAnO with seven design variables for the binding device and three parameters for the support. The weight method using a multi-objective function was also determined by the Pareto optimal solution. The volume of the binding device in the optimum design result was found to be reduced by 16%, from $2.278e-005m^3to1.912e-005m^3$. From the result, we confirmed the effectiveness of the design method proposed as a multi-objective function optimization problem.

• 대한안전경영과학회지
• /
• 제10권3호
• /
• pp.73-79
• /
• 2008

Display's life time is defined as the time of 50% luminance drop. It was used luminance and temperature as accelerated factor to accelerated lifetime at test. When it's working jule-heat is generated and device's temperature is growing as any temperature because OLED is self-luminance display device. So we decided temperature condition is 25, $70^{\circ}C$, and luminance condition is $60{\sim}300cd/m^2$ in test. It's assumed accelerated lifetime model by result of the test.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.725-728
• /
• 2002

A separate type thermosyphon can be utilized as a cooling device of electronic equipments (such as CPU of a personal computer or notebook). This study was carried out to investigate the cooling effect of separate type thermosyphon and to find the adequate parameters affecting the separate type thermosyphon. The heat transfer characteristics of separate type thermosyphon were obtained from experimental results. A $50{\times}50{\times}2 mm$ heat source was copied after CPU for the experiments. The results indicate that the device is capable of dissipating 60W of thermal energy and keeping the heat plate surface temperature under 50'E and the device can transfer heat from the evaporator to the condenser through natural circulation (without any external driving forces). Some transport phenomena of the working fluid and the heat transfer characteristics of the loop were observed in the experiments and are discussed in detail below.

• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.493-501
• /
• 2012

A rotational force generator for molten metal is developed using a linear motor design technology. Also, the developed device is applied to reproduce aluminum scraps and easy to control the rotate, stop, and forward and reverse rotation of molten metal. In addition, the developed device improves the melting speed and reproduction rate about 250 (%) and 96-99 (%), respectively, compared to the conventional handmade methods. Because it generates almost no dusts, it can improve working environments in a factory. Also, it has no losses in energy because it directly melts scraps. The device generates small amounts of the loss in refractory materials and aluminum caused by its oxidation because the molten metal is continuously rotated in which the loss and oxidized aluminum are the problems in the conventional melting and holding furnaces. Thus, it is possible to extend the life of furnaces and to produce high quality aluminum products.

• 한국산업융합학회 논문집
• /
• 제26권3호
• /
• pp.395-400
• /
• 2023

Recently, the number of hornet is rapidly increasing because of change in the ecological climate. It gives a sense of threat to the people and damages the beekeeping industry as a predator of honey bees. Firefighters are working to remove hornet and vespiary, but it has been reported that it is difficult to remove at high altitudes. In this study, an ultra-light flying device was developed to remove vespiary. It has been developed in four types: Drug spray type, Clamp type, Cutter type, and Scraper type, which can be used as field-customized equipment. Therefore, the developed equipment is expected to contribute to the safe field activities of firefighters.

• Journal of Oral Medicine and Pain
• /
• 제17권2호
• /
• pp.27-35
• /
• 1992

The purpose of this study was to evaluate the size of the temporomandibular joint space by the increase of the occlusal force on the working side and the non-working side during unilateral biting. For the study, 22 normal adults, age from 23 to 25, who had normal or class I molar relationship and had no symptoms on TMJ area and masticatory muscles were selected. Transcranial TMJ radiograph was taken during unilateral biting with the sensor of occlusal load measuring device (MPM-3000 ; Nihon Kohden Kogyo Co. Ltd., Japan) on 1st molar teeth of right and left side given to force of 0kg, 10kg, 20kg and 30kg respectively with Accurad-200(Denar Corperation's product). The radiographs were traced on the screen, with enlaged as 5 times. The size of temporomandibular joint space at anterior, superior and posterior compartment were measured with Dumas's method (reference line between squamotympanic fissure and the lowest point of articular eminence). The following results were obtained by this study. 1. The size of anterior TMJ space showed a tendency to decrease on the working side and increase on the non-working side by the increase of the occlusal force, but had no statistical significancy (P>0.05). 2. The size of superior TMJ space showed a tendency to increase on the working side and decrease on the non-working side by the increase of the occlusal force (P<0.05). 3. The size of posterior TMJ space showed a tendency to decrease on both working and nonworking side, but had no statistical significancy (P>0.05)

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.722-728
• /
• 2000

This study of field control machine in the recycled vinyl rail is gantry crane type and promoting agricultural automatization through self-controlled spraying, harvesting and conveyance. In addition to, that control machine could get a cost and labor reduction effect through automatization and make better environment by preventing farmers from agrichemical damage, accidents and recycling wasted vinyl. That machine is able to be divided as traveling, spraying, harvesting and conveyance sections. In driving section consists of girder frame, carrier, rail, control system, driving system, working machine, rail and loading device for working machine. This machine has following advantages to be able to bring a big innovation in the agricultural industry. I) Accurate performance is able to be done by proper positioning due to based on the rails. 2) The soil is not made hard like heavy tractor 3) The wheel is not sank into the soil and slipped well under rain like heavy tractor. Therefore, weather and soil situation could not affect working condition. 4) Complete unmanned control and 24hours-working are available due to traveling on the rails. 5) It could use various energy resources like not only liquid fuel but also solar, common electronic power due to traveling on the rails.