• 지역사회간호학회지
• /
• 제12권3호
• /
• pp.647-660
• /
• 2001

Forming health care management model in small-scale enterprises was the purpose of this study. For the purpose, we tried to investigate the characteristics of small-scale enterprises and analyzed the pattern of their health care management. The results are as follow: 1. The strength of health managing agency and technical supporting program lies in team approach by specialized manpower. However, if the liaison between each part of the organization is not smooth, the overall management will be very difficult. 2. Small scale enterprises are characterized by their short life after the establishment, use of rental building, lack of welfare facilities, weakness in sanitary management and aggregation of factories of similar type of industry. Because of these characteristics, it is very difficult to solve problem basically, such as improvement of working environment. Therefore, it is important to focus on health education and community based approach. 3. Many workers in small-scale factories are in middle and old age. They have health problems mainly related to personal habits. Implementation of an appropriate health promotion program is needed. 4. The number of workplaces, which should be managed by health managing agent. is increasing rapidly. But the number of health managing agent is limited. In the aspect of the requirement of manpower and equipment, training personal agent is more urgent than founding institutional agent. 5. The uniform method of health management hampers the choice of employer and workers. The types of provision of health management should be diversified. 6. For an efficient management, a frequent visit of personal agent and the following referral to a specialist should be done. The specialists in charge of secondary management are from the field of occupational medicine, occupational hygiene, ergonomics, etc. 7. The health management of small-scale facilities should have six components. They are community-based approach, multi-disciplinary cooperative system, program based on the need of recipient, forming partnership of employer and worker, change of lifestyle, and evidence-based program.

• 한국건설관리학회논문집
• /
• 제24권5호
• /
• pp.73-82
• /
• 2023

Optimization of Construction Site Layout Planning (CSLP) heavily relies on workers' travel paths. However, traditional path generation approaches predominantly focus on the shortest path, often neglecting critical variables such as individual wayfinding tendencies, the spatial arrangement of site objects, and potential hazards. These oversights can lead to compromised path simulations, resulting in less reliable site layout plans. While Deep Reinforcement Learning (DRL) has been proposed as a potential alternative to address these issues, it has shown limitations. Despite presenting more realistic travel paths by considering these variables, DRL often struggles with efficiency in complex environments, leading to extended learning times and potential failures. To overcome these challenges, this study introduces a refined model that enhances spatial navigation capabilities and learning performance by integrating workers' visibility into the reward functions. The proposed model demonstrated a 12.47% increase in the pathfinding success rate and notable improvements in the other two performance measures compared to the existing DRL framework. The adoption of this model could greatly enhance the reliability of the results, ultimately improving site operational efficiency and safety management such as by reducing site congestion and accidents. Future research could expand this study by simulating travel paths in dynamic, multi-agent environments that represent different stages of construction.

• 한국환경보건학회지
• /
• 제37권1호
• /
• pp.12-21
• /
• 2011

The objective of this study is to review retrospective exposure assessment methods used in wafer fabrication operations to determine whether adverse health effects including mortality or cancer incidence are related to employment in particular work activities and to recommend an appropriate approach for retrospective exposure assessment methods for epidemiological study. The goal of retrospective exposure assessment for such studies is to assign each study subject to a workgroup in such a way that differences in exposure within the workgroups are minimized, as well as to maximize the contrasts in exposure between workgroups. To reduce the misclassification of exposure and to determine if adverse health effects including mortality or cancer incidence are related to particular work activities of wafer fabrication workers, a minimum requirement of work history information on the wafer manufacturing eras, job and department at which they were exposed should be assessed. Retrospective assessment of the task that semiconductor workers performed should be conducted to determine not only the effect of a particular job on the development of adverse health effects including mortality or cancer incidence, but also to adjust for the healthy worker effect. In order to identify specific hazardous agents that may cause adverse health effects, past exposure to a specific agent or agent matrices should also be assessed.

• 한국환경보건학회지
• /
• 제47권5호
• /
• pp.432-445
• /
• 2021

Background: The European Centre for Ecotoxicology and Toxicology of Chemicals' Targeted Risk Assessment (ECETOC TRA) tool has been recognized by EU REACH as a preferred approach for calculating worker health risks from chemicals. Objectives: The applicability of the ECETOC TRA to occupational exposure estimation from industrial uses of methanol was studied by inputting surveyed and varied parameters for TRA estimation as well as through comparison with measured data. Methods: Information on uses of methanol was collected from seven working environment monitoring reports along with the measured exposure data. Input parameters for TRA estimation such as operating conditions (OCs), risk management measures (RMMs) and process categories (PROCs) were surveyed. To compare with measured exposures, parameters from the surveyed conditions of ventilation but no use of respiratory protection were applied. Results: PROCs 4, 5, 8a, 10, and 15 were assigned to ten uses of methanol. The uses include as a solvent for manufacturing sun cream, surfactants, dyestuffs, films and adhesives. Methanol was also used as a component in a release agent, hardening media and mold wash for cast products as well as a component of hard-coating solution and a viscosity-controlling agent for manufacturing glass lenses. PROC 8a and PROC 10 of a cast product manufacturer without LEV (local exhaust ventilation) and general ventilation as well as no respiratory protection resulted in the highest exposure to methanol. Assuming the identical worst OCs and RMMs for all uses, exposures from PROC 5, 8a, and 10 were the same and the highest followed by PROC 4 and 15. The estimation resulted in higher exposures in nine uses except one use where measured exposure approximated exposures without RMMs. Conclusions: The role of ECETOC TRA as a conservative exposure assessment tool was confirmed by comparison with measured data. Moreover, it can guide which RMMs should be applied for the safe use of methanol.

• 한국환경독성학회:학술대회논문집
• /
• 한국환경독성학회 2003년도 추계국제학술대회
• /
• pp.160-161
• /
• 2003

In Korea, 1, 357 tonnes of benzoyl peroxide was produced as a white granule with purities ranging 22 to 95％ in 2001. 75% of benzoyl peroxide is mainly used in the manufacture of expandable styrene polymer and other resins as initiators of polymerization and also been used in the treatment of acne vulgaris and the medical product contains mainly 5 to 10% of it. A very small portion of benzoyl Peroxide is used as flour bleaching agent, Potential human exposure from workplaces is expected to be negligible because this chemical is produced in closed system in only one company in Korea and when a production facility monitors its workplace for the worker exposure annually, the concentration of airborne aerosols at the personal sampling has been less than 1mg/㎥.

• 한국산업보건학회지
• /
• 제22권1호
• /
• pp.9-19
• /
• 2012

Objectives: The aim of this study is to critically review the exposure surrogates and estimates used to associate health effects in wafer fabrication workers such as spontaneous abortion and cancer, as well as to identify the limitations of retrospective exposure assessment methods Methods: Epidemiologic and exposure-assessment studies of wafer fabrication operations in the semiconductor industry were collected. Retrospective exposure-assessment methods used in cancer risk and mortality and reproductive toxicity were reviewed. Results: Eight epidemiologic papers and two reports compared cancer risk among workers in wafer fabrication facilities in the semiconductor industry with the risk of the general population. Exposure surrogates used in those cancer studies were fabrication(vs. non-fabrication), employment duration, manufacturing eras, job title (operator vs. maintenance worker) and qualitative classifications of agents without assessing specific agent or job-specific exposure. In contrast, specific operation, job title and agents were used to classify the exposure of fabrication workers, contributing to finding a significant association with spontaneous abortion (SAB). Conclusion: Further epidemiologic studies of fabrication workers using more refined exposure assessment methods are warranted in order to examine the associations between fabrication work, environment, and specific agents with cancer risk or mortality as used in SAB epidemiologic studies.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.1085-1092
• /
• 2022

Travel distance is a parameter mainly used in the objective function of Construction Site Layout Planning (CSLP) automation models. To obtain travel distance, common approaches, such as linear distance, shortest-distance algorithm, visibility graph, and access road path, concentrate only on identifying the shortest path. However, humans do not necessarily follow one shortest path but can choose a safer and more comfortable path according to their situation within a reasonable range. Thus, paths generated by these approaches may be different from the actual paths of the workers, which may cause a decrease in the reliability of the optimized construction site layout. To solve this problem, this paper adopts reinforcement learning (RL) inspired by various concepts of cognitive science and behavioral psychology to generate a realistic path that mimics the decision-making and behavioral processes of wayfinding of workers on the construction site. To do so, in this paper, the collection of human wayfinding tendencies and the characteristics of the walking environment of construction sites are investigated and the importance of taking these into account in simulating the actual path of workers is emphasized. Furthermore, a simulation developed by mapping the identified tendencies to the reward design shows that the RL agent behaves like a real construction worker. Based on the research findings, some opportunities and challenges were proposed. This study contributes to simulating the potential path of workers based on deep RL, which can be utilized to calculate the travel distance of CSLP automation models, contributing to providing more reliable solutions.

• 한국산업보건학회지
• /
• 제8권2호
• /
• pp.254-263
• /
• 1998

A worker employed in a serpentine mine was found developed mesothelioma as the first case of Korea in 1997. Asbestos was known as a causative agent for mesothelioma. Thus, asbestos contamination in mines could be a big health threat to those workers who were unknowingly exposed. However, there was no report that any minerals found in Korea contained asbestos. This study was carried out to find the presence of any asbestiform fibers in minerals which could be obtained in Korean mines. We examined fifteen minerals from 44 mines which were suspected contaminated with asbestiform fibers. Asbestiform analysis was done with high resolution transmission electron microscope(TEM), with energy dispersive X-ray spectroscope(EDX) and X-ray diffraction(XRD) analyses. Among asbestiform fibers, chrysotile was found in chrysotile, serpentine, talc and pyrophylite specimens from 11 mines. Tremolite was found in tremolite and talc specimens from three mines. Mordenite was found in zeolite specimens from two mines. Wallastonite and sepiolite were found in wallastonite and sepiolite specimens respectively. Crocidolite, antigorite and actinolite were found from talc specimens. But no asbestiform fiber contaminants were found in doromite, vermiculite, limestone, marble, gypsum, kaolin, and clary specimens. Thus, these asbestiform fibers such as such as chrysotile, tremolite, mordenite, crocidolite, antigorite and actinolite could be the responsible agents for the health hazards such as mesothelioma and other cancers.

• 한국경제지리학회지
• /
• 제14권2호
• /
• pp.192-210
• /
• 2011

이 글은 박정희 정권의 노통통제전략에 대해 분석한다. 구체적으로, (i) "어떤 노동통제방식이었는가?" 그리고 (ii) "왜 노동통제전략이 변화되었는가?"가 분석대상이다. 분석 결과에 의하면, 박정희의 노동통제전략은 1960년대의'유사 국가 조합주의적 혼합전략’에서 1970년대의'시장기제적 억압전략'으로 진화하였다. 전자가 전국수준에서 통합되고 중앙집권화된 산별체제를 통한 노동통제에 기초하여 시장기제적 억압전략을 부차적으로 구사한 노동전략이라면, 후자는 시장기제적 억압전략에 기초하여 부분적으로 국가에 의해 매수된 한국노총 지도부를 이용한 억압전략이었다. 1970년대 초, 박정희 정권의 노동전략 변화는 (i) 거시적으로 정치경제적 불안정 증후들이 나타나고, 그리고 (ii) 미시적으로'유사 국가조합주의적' 억압전략이 한계를 보였기 때문이다.

• 한국산업보건학회지
• /
• 제30권1호
• /
• pp.50-57
• /
• 2020

Objectives: Methyl bromide is a highly toxic substance that can cause systemic poisoning, neurotoxicity, pulmonary edema. Methyl bromide is a widespread fumigation agent used for import and export quarantine, but there is little data on exposure assessment of workers participating in such fumigation. Therefore, this study aims to investigate the exposure level of methyl bromide among workers and the concentration distribution of methyl bromide in the workplace during fumigation. Methods: For this study, one wood tent and one container fumigation area in Pusan, and one wood tent fumigation area in Incheon were investigated over three months from June 2001. Results: Methyl bromide exposure levels for container fumigation workers were from undetected to 1.86 ppm and from undetected to 2.28 ppm for tent fumigation workers as an 8 hr TWA. After opening the container door, the methyl bromide concentration in the container decreased rapidly over time, but the concentration remained over 1 ppm even after about one hour. The concentrations around the tent during its removal were highly affected by wind, but were detected in a range from undetected to 11.97 ppm. Conclusions: This study confirmed that both container and tent fumigation caused workers to exceed the exposure limit of 1 ppm as an 8 hour TWA. In particular, it could be confirmed that a situation exists in which the worker may be exposed to high concentrations of methyl bromide when opening the container or removing the tent due to the nature of the work. Therefore, it is very important to improve working methods and to wear appropriate personal protective equipment.