• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.11
• /
• pp.118-131
• /
• 2012

The existing electronic tagging system traces the location of a sex offender through communicating with GPS satellites and mobile phone base stations in order to prevent repeated crimes. However, the GPS satellite communication method does not work well in the interiors of downtown buildings or on the subways where it is difficult to receive satellite signals. In such cases, the location can be traced through communication with mobile phone base stations. But the distance between mobile phone base stations is several hundred meters, and as a result the margin of error for location tracing can be maximum of 2km in accuracy reduction. Take for example, if a kindergarten is located on the 2nd floor and a coffee shop and the sex offender are located on the 3rd floor in a 5-story building that is downtown, the existing electronic tagging system cannot trace the location of the sex offender as the GPS satellite communication does not work in the interior of the building and the exact floor that the sex offender is located on cannot be recognized through communication with mobile phone base stations. This occurrence is a big problem for the existing electronic tagging system, which is based on position recognition. Therefore, this study suggests a smart electronic tagging system that can monitor sex offenders by using a Ubiquitous Sensor Network in such extreme situations where position recognition is not possible.

• Journal of Technologic Dentistry
• /
• v.24 no.1
• /
• pp.51-63
• /
• 2002

The purpose of this study was to be of use for getting rid of job stress from dental technicians, by examining how much they were stressed out at work place as one of the professional medical personnels. The subjects in this study were 255 selected dental technicians who were working in the region of Taegu. The one-on-one interview was conducted from March 1 to 30, 2001, with structured questionnaire. The questionnaire sued in this study included 19 question items about the general characteristics and 29 items regarding job stress. The job stress was categorized into seven subareas based on earlier studies and considering the job situations of dental technicians: heavy workload, job conflicts, improper treatment, role and job knowledge, human relations, physical environment and personal matters. The job stress extent was measured on five-point Likert scale that is widely used in social science: one point for no stress, two for little stress, three for so-so, four for a little stress, and five for severe stress. Therefore, a higher point means a severer job stress. The reliability of the questionnaire turned out very good with Cronbach a = 0.9272. The findings of this study were as follows: 1. The general characteristics of the dental technicians investigated could be described as below: (1) By gender, 80.4% of the dental technicians were male, and 50.2%, the largest percentage, were in their 20s, followed by those in their 30s, those in their 40s, and those in their 50s in the order named. (2) The most common work place was dental technician shop(92.5%), followed by dental technology room in dental hospital or clinic and in general hospital in the order named. The primary duties were coating materials work(30.6%), followed by sculpture, grinding, partial and full denture and orthodontics in the order named. 2. The most larges (1) The most largest motivation to be a dental technician was its being a professional(33.7%), followed by the advice from others, their own aptitude, and good economic treatment in the order named. 3. Their job stress could be explained as below: (1) Their collective job stress average was 3.96$^{\circ}{\ae}$0.50 on the basis of 5 point, which showed that they were exposed to a fairly severe job stress. (2) By area, they were most stressed out from heavy workload (4.12), and they also were severely stressed from role and job knowledge(4.02) and personal matters(4.00). (3) By situation, they were most stressed when the disagreement of prosthesis that results from a specific error is unconditionally attributed to them(4.43). And they were also stressed a lot when their workload increases due to the rework(4.38), when a dentist asks something difficult for them to resolve(4.20), when heavy workload makes their working hours irregular and it's impossible to lead a personal life or have leisure time(4.16), and when they are o work for an excessively short time(4.16). This fact indicated that most of the dental technicians were exposed to a lot of stress in conjunction with job performance. 4. The main duties they took charge of didn't make any significant difference to their job stress, but yielded a significant difference to the extent of job stress in individual areas and the order of the most stressful one. Those who were engaged in grinding were most stressed from their own matters, whereas heavy workload was most stressful for those who were engaged in the other types of works. 5. As a result of seeing if their personal characteristics yielded any differences to job stress, the personal characteristics that made their job stress vary significantly were working hours, motivation of being a dental technician, job satisfaction and willingness to continue doing dental technology works. There was a tendency that longer working hours led to severer job stress, and those who chose to be a dental technician according to their own aptitude were less stressed than the others who became a dental technician because of economic reason or advices from others. And the people who were satisfied with their job were exposed to less job stress than the others who weren't, and those who had an intention to keep that job as much as possible were less stressed, compared to the others who hadn't.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.10 no.1
• /
• pp.93-103
• /
• 2000

The purpose of this case study is to report a case of lung cancer with exposure to welding fumes of welders in Korea and to demonstrate the causal relationship with exposure to welding fumes, especially with nickel and hexavalent chromium. The case is 47 years old, and had been engaged in welding, gas cutting, grinding and gousing on mild, stainless steel and nickel steel for 11 years from 1982 to 1993, and have been engaged in cleaning steel rollers with a cleaning oil in the same work shop since 1993. The level of welding fume exceeded the occupational exposure limit of $5mg/m^3$ established by the Korean Ministry of Labor and American Conference of Government Industrial Hygienists (ACGIH). Especially, detectable hexavalent chromium and nickel was generated during welding, gousing on stainless and nickel steel. However, there was no ventilation systems(local and dilution) and no personal protection. There is several evidence that the past (1983-1993) exposure would be higher than the present. In conclusion, the lung case could be associated with his task including welding, gousing, and this association could be attributed to carcinogenic potential of the nickel and chromium in the fume.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.63-72
• /
• 2017

This paper proposes a procedure to improve the operational efficiency of the automotive parts manufacturing process by applying classical IE techniques composed of process analysis, work method analysis, and motion analysis, and a specific application case is outlined. The proposed procedure was developed originally by the Task Force organized in L company's automotive parts manufacturing business unit. The balance efficiency and production capacity were used as measures of operational efficiency. The developed procedure follows the general procedure of analyzing the phenomenon at the manufacturing shop, deriving an improvement solution to solve the problem, evaluating each derived alternative, and implementing it to the field to achieve productivity improvement. Among the methods used in each phase of the procedure, function analysis used in the waste discovery phase and R&R evaluation method used in the alternative assessment phase are unique techniques developed by L company's TF. The R&R Evaluation method techniques are described in detail because this method is highly applicable and extensible. A case of applying developed procedures to improve the EPS motor manufacturing process is discussed. As a result, the line balance efficiency and production capacity were increased to a satisfactory level.

• Information Systems Review
• /
• v.11 no.2
• /
• pp.183-207
• /
• 2009

In general, the introduction of information technology to domestic small and middle size firms is depending on the governmental supporting policy. However, even under this situation there is also a case that the building up of information technology is initiated by the management of small and middle size firms. An accumulated know-how for information technology and powerful leadership in such firms are considered as success factors. This study attempts to analyze a case for 'THEFACESHOP', in which MIS is successfully built. To achieve corporate goals, the CEO of THEFACESHOP based on the extensive knowledge of information technology drove to build up information system. Also, the board of directors supported him, and employees committed to their organization. Through the strong leadership of the CEO, the information system of THEFACESHOP became sufficient and efficient. And it led the organization and the information system to be competitive. In particular, the systematic approach of THEF ACESHOP reinforcing its competitiveness can be summarized as follows: First, it tried to construct basic information systems as like ERP etc. to increase work-efficiency. Second, it completed CRM related systems for analysis to maximize its customer orientation and marketing effect. Third, the last step can be stated as the building up of operation related CRM systems to improve the responsiveness of target marketing activities and the profitability of its agencies. Such endeavors of THEFACESHOP contributed to increase productivity and performance of the organization. As a result, THEFACESHOP has had its own 'Natural Story' and price competitiveness. For that reason THEFACESHOP became the best of brand-shop cosmetic firms. This success based on the strong leadership and the systematic investment on the information system.

• Proceedings of the Korea Society of Costume Conference
• /
• 2001.08a
• /
• pp.11-13
• /
• 2001

For those unfamiliar with the shoe world, Pinet (1817-1897) was a contemporary of Worth, the great Parisian couturier. So I look at the glamour shoes and the world of haute couture, and indeed the development of the named designer. That is a concept we are all familiar with now. So it is not easy to comprehend the lack of names for the exquisite work before 1850. Straightway I have to say that the number of noted shoe designers is far fewer than famous dress designers, but I will introduce you to some of them, against the background of contemporary shoe fashions. Franc;ois Pinet was born in the provinces (probably Touraine) in 1817, two years after the end of the Napoleonic Wars. His father, an ex-soldier, settled to shoemaking, a comparatively clean and quiet trade. It had a tradition of literacy, interest in politics, and was known as the gentle craft, which attracted intelligent people. We should presume father would be helped by the family. It was usual for a child to begin by the age of 5-6, tying knots, sweeping up, running errands and gradually learning the job. His mother died 1827, and father 1830 when he was 13, and at the time when exports of French shoes were flooding world markets. He went to live with a master shoemaker, was not well treated, and three years later set out on the tour-de- France. He worked with masters in Tours and Nantes, where he was received as Compagnon Cordonnier Bottier du Devoir as Tourangeau-Ia rose dAmour (a name to prove most appropriate). He went on to Bordeaux, where at 19 he became president of the local branch. In 1841 he went to Paris, and in 1848, revolution year, as delegate for his corporation, he managed to persuade them not to go on strike. By now the shoemakers either ran or worked for huge warehouses, and boots had replaced shoes as the main fashion. In 1855 Pinet at the age of 38 set up his own factory, as the first machines (for sewing just the uppers) were appearing. In 1863 he moved to new ateliers and shop at Rue ParadisPoissoniere 44, employing 120 people on the premises and 700 outworkers. The English Womans Domestic Magazine in 1867 records changes in the boots: the soles are now wider, so that it is no longer necessary to walk on the uppers. There is interest in eastern Europe, the Polonaise boots with rosette of cord and tassels and Bottines Hongroises withtwo rows of buttons, much ornamented. It comments on short dresses, and recommends that the chaussure should correspond to the rest of the toilet. This could already be seen in Pinets boots: tassels and superb flower embroidery on the higher bootleg, which he showed in the Paris Exposition that year. I think his more slender and elegant Pinet heel was also patented then or 1868. I found little evidence for colour-matching: an English fashion plate of 1860 shows emerald green boots with a violetcoloured dress.

• Archives of design research
• /
• v.14 no.2
• /
• pp.163-174
• /
• 2001

William Morris(1834-1896) was the most versatile and talented of all British nineteenth century polymaths. Since his death over one hundred years ago his achievements as an artist, designer, manufacturer, shop-keeper, poet, author, publisher, printer, collector, teacher, conservationist, political activist and environmentalist have influenced the lives and work of people throughout the world. Moris is now best known for his attractive and colorful patterns. The decorating firm of Morris, Marshall, Fault & Company(Morris & Company after 1875) was established in 1861. Over the years it produced works, ranging from stained·glass windows and furniture to tapestries, carpets and printed and woven fabrics, that had great influence on the course of British design. His earliest experiments with the craft were amateurishly worked embroideries made for his own use. Before long, Morris began to produce textiles on a more commercial basis. In order to control production properly, Morris set about learning the various textiles techniques, first dyeing and blockprinting, hand-loom jacquard and eventually, carpet and tapestry weaving. This extraordinary involvement with the practical side of manufacture separated Morris from all other designers of his time and contributed in no small way to his success. Morris's designs for textiles, embroidery, dyeing, woven, carpet and tapestry were commercially produced, that are most universally admired and frequently copied today. These have a timeless quality arising from the designers respect for and knowledge of the technique. Of equal importance was his love of nature, evidence of which can be seen in even the smallest details of each of his patterns.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.4
• /
• pp.289-296
• /
• 2014

The rebar detailing is an important work influencing the final performance and quality of RC structures. But it is one of the most irrational and illogical activity in construction site. Many groups of workers, including main contractors, structural engineers, shop drawers, rebar fabricators, and etc., participate in this activity. A loosely-organized process for this activity is apt to produce a big amount of rebar loss or even degraded structures. A 3-dimensional rebar auto-placing system, called as Rebar Hub, has been designed and implemented in this research. Rebar Hub provides a totally integrated service from 3D structural modeling of buildings to rebar auto-placing considering anchorage, splice, and the length of ordered rebar. In addition, Rebar Hub can recognize the 2D drawing CAD files and then build 3D structural models which are used for the start point of 3D rebar auto-placing. After rebar auto-placing, each members of the 3D structural model have rebar information belonging to them. It means that the rebar information can be used for the afterward works such as quantity-survey, manufacturing and fabrication of rebars. Rebar Hub is showing outstanding performance while applying to practical projects. It has almost five times productivity and reduces the rebar loss up to 3~8% of the initially-surveyed amount of rebar.

• Journal of Conservation Science
• /
• v.28 no.4
• /
• pp.403-410
• /
• 2012

The brine treatment applied during the fabrication of forged high tin bronze objects is considered effective at the removal of surface oxide layers developed at elevated temperatures. There is not much information, however, available for the understanding of its exact effect and purpose. This work performed laboratory experiments to characterize the effect brine treatments produce on the surface of bronze objects during fabrication. Specimens were first made in the bronze shop of the Yongin folk village under varying conditions of brine treatments, and the results obtained were then used in the following laboratory experiments where the effect of brine treatments were investigated in terms of brine concentrations, alloy compositions and thermo-mechanical treatments. The results show that oxide layers generated at high temperature are easily removed by the brine treatment. It was found that the element, chlorine, played a key role in the removal of such oxide layers as opposed to the other constituent of the brine, sodium, makes no notable contribution. In bronze alloys containing 22% tin, this brine effect is obtained regardless of the application of forging as long as the brine concentration is over 0.5% based on weight. In alloys containing lead, however, no brine effect is observed due to the molten lead that emerges from inside the hot bronze specimen and forms a thin layer on its surface.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1249-1249
• /
• 2022

The facade, an exterior material of a building, is one of the crucial factors that determine its morphological identity and its functional levels, such as energy performance, earthquake and fire resistance. However, regardless of the type of exterior materials, huge property and human casualties are continuing due to frequent exterior materials dropout accidents. The quality of the building envelope depends on the detailed design and is closely related to the back frames that support the exterior material. Detailed design means the creation of a shop drawing, which is the stage of developing the basic design to a level where construction is possible by specifying the exact necessary details. However, due to chronic problems in the construction industry, such as reducing working hours and the lack of design personnel, detailed design is not being appropriately implemented. Considering these characteristics, it is necessary to develop the detailed design process of exterior materials and works based on the domain-expert knowledge of the construction industry using artificial intelligence (AI). Therefore, this study aims to establish a detailed design automation algorithm for AI-based condition-responsive exterior wall panels and their back frames. The scope of the study is limited to "detailed design" performed based on the working drawings during the exterior work process and "stone panels" among exterior materials. First, working-level data on stone works is collected to analyze the existing detailed design process. After that, design parameters are derived by analyzing factors that affect the design of the building's exterior wall and back frames, such as structure, floor height, wind load, lift limit, and transportation elements. The relational expression between the derived parameters is derived, and it is algorithmized to implement a rule-based AI design. These algorithms can be applied to detailed designs based on 3D BIM to automatically calculate quantity and unit price. The next goal is to derive the iterative elements that occur in the process and implement a robotic process automation (RPA)-based system to link the entire "Detailed design-Quality calculation-Order process." This study is significant because it expands the design automation research, which has been rather limited to basic and implemented design, to the detailed design area at the beginning of the construction execution and increases the productivity by using AI. In addition, it can help fundamentally improve the working environment of the construction industry through the development of direct and applicable technologies to practice.