• 한국기계가공학회지
• /
• 제5권2호
• /
• pp.56-64
• /
• 2006

Rapid progress in many branches of technology has led to a demand on new materials such as high strength light weight alloys, powdered alloys and composite materials. The hydrostatic extrusion is essentially a method of extruding a clad rod through a die. In order to investigate the effect of the process conditions such as friction heat, deformation and clad thickness on the clad extrusion process, viscoplastic finite element simulations were conducted. A specific model for theoretical analysis used in this study is The single scalar variable version of Hart's model. An experiment also has been carried out using 1.5MN hydrostatic extruder with variable speed ram, LVDT and load cell for comparison. It is found that the hydrostatic extrusion pressure considering the effect of heat dissipation in this theoretical work was closer to the experimental pressure than the isothermal hydrostatic extrusion pressure.

• 한국전문물리치료학회지
• /
• 제2권2호
• /
• pp.98-107
• /
• 1995

Physical therapists use assumptions about motor control in every aspect of their work in treating stroke patients. An understanding of the recovery process after stroke, some neural mechanism of recovery and therapeutic model is critical factor for physical therapist to evaluate and obtain a higher final stage of recovery. The purpose of this article was to review the recovery process after stroke, some neural mechanism of recovery, the role of rehabilitation in the process of recovery, therapeutic model and its limitation. This article will help understanding of recovery process. evaluation, and treatment of the stroke patients. Each therapeutic method consists of a different set of assumptions and they are not completely independent of one another. Therefore specializing in any techniques of physical therapy will not be enough to treat stroke, so we are in need of integrated approach and objective measurement instrument to adequately evaluate and treat stroke patients.

• 산업경영시스템학회지
• /
• 제33권3호
• /
• pp.93-101
• /
• 2010

Regarding project management, many organizations have developed and distributed general project management knowledge systems, and application fields use the knowledge systems to apply the process suitable for characteristics of a project. This study suggests project management process models to apply to product development projects and introduces the application cases. This product development project management process model is composed of five top processes of initiation and preparation, planning, implementation management, control, and termination and transfer. The five processes are re-divided into 18 bottom processes. These processes are expressed as input, control, output, and mechanism by using the IDEF0 model. This model is applied to the new car development project of a Korean automobile company and introduces the cases, which shows a project charter, a work breakdown structure, a project schedule, a progress s-curve, a risk register, and a performance report.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.369-373
• /
• 2001

In this paper, we proposes the steps adopted to construct the neural network model for GMAW welds. Conventional, automated process generally involves sophisticated sensing and control techniques applied to various processing parameters. Welding parameters are influenced by numerous factors, such as welding current, arc voltage, torch travel speed, electrode condition and shielding gas type and flow rate etc. In traditional work, the structural mathematical models have been used to represent this relationship. Contrary to the traditional model method, neural network models are based on non-parametric modeling techniques. For the welding process modeling, the non-linearity at well as the coupled input characteristics makes it apparent that the neural network is probably the most suitable candidate for this task. Finally, a suitable proposal to improve the construction of the model has also been presented in the paper.

• 한국멀티미디어학회논문지
• /
• 제19권12호
• /
• pp.2024-2035
• /
• 2016

Modern industry requires people with the ability to create and improve their knowledge. Most educational institutions have used mentoring activities which can train those people. Then each of the institutions has different directions because they work in their own fields. For that reason, many people which want to make new mentoring program have no choice but to go through many trials and errors. This paper deals with the design method of basic process model for mentoring based on DEVS in order that people plan a new mentoring business or make a new mentoring group easily. Our proposed model is expected to be used as a guide to establish procedures for mentoring systems.

• 한국응용과학기술학회지
• /
• 제22권1호
• /
• pp.62-70
• /
• 2005

Step-feed process for biological nitrogen removal were analyzed numerically for the each unit and final total nitrogen(TN) effluent by water quality management(WQM) model and the results were compared data from these wastewater treatment plants. No bugs and logic error were occurred during simulation work. All of the simulation results tried to two times were obtained and both results were almost same as this model has become good reappearance. It was concluded that most of nitrogen removal occurred in the first oxic tank. Thus the controlling of the first anoxic tank may be more important in term of nitrogen removal. Also each unit of simulation result was kept good relationship with that of measured data. Accordingly this WQM model has good reliance. Finally, WQM model can predict final TN effluent within ${\pm}6.0mg/{\ell}$.

• Journal of the Korean Data and Information Science Society
• /
• 제27권3호
• /
• pp.803-814
• /
• 2016

Recent times have seen an exponential increase in the amount of spatial data, which is in many cases associated with temporal data. Recent advances in computer technology and computation of hierarchical Bayesian models have enabled to analyze complex spatio-temporal data. Our work aims at modeling data of daily average nitrogen dioxide (NO2) levels obtained from 25 air monitoring sites in Seoul between 2003 and 2010. We considered an independent Gaussian process model and an auto-regressive model and carried out estimation within a hierarchical Bayesian framework with Markov chain Monte Carlo techniques. A Gaussian predictive process approximation has shown the better prediction performance rather than a Hierarchical auto-regressive model for the illustrative NO2 concentration levels at any unmonitored location.

• Industrial Engineering and Management Systems
• /
• 제15권4호
• /
• pp.298-306
• /
• 2016

The gap between universities, scientific centers and industrial-production units is one of higher education concerns. In academic entrepreneurship, the university work simultaneously in education, research and entrepreneurship. The universities play a key and important role in providing educational opportunities in economic development. This research aims to develop and expand science as well as help managers to explain the process of technology transfer in entrepreneurial university. This research is applied-developmental type and on the other hand, data driven theories have been used in this study. Current model is generally tried to meanwhile compensate previous shortcomings, include some strengths such as considering domestic factors of Iran as well as update effective factors on the process of technology transfer. Finally the suggested model has been compared with existing well-known models that each one of those models have some drawbacks which have been tried to be minimized in suggested model as much as possible.

• 시스템엔지니어링학술지
• /
• 제17권1호
• /
• pp.43-52
• /
• 2021

The aim of this study is to propose the design suitable for sustainability evaluation model of the mobile industry considering system process (SEP). Although a quantitative evaluation was conducted on the link between the national sustainability report and the mobile industry, it was confirmed that it was difficult to identify stakeholders. So it is necessary to develop the design process suitable for the more operator-specific interfaces. The Human System Integration (HSI) methodology was proposed through linkage with work domain analysis. Agile methodology and Resilience engineering methodology were added for sustainable model design. The proposed sustainability system evaluation model is applied so that it can be easily used in all industries.

• 한국가구학회지
• /
• 제19권5호
• /
• pp.319-327
• /
• 2008

As art of lamination by plywood got to be generally used, it became a suitable material for expressing live curves that were not able to be expressed on wood furniture made of plank and timber, as well as, openwork deep in curved space, heavy quality of material, and changing contour line-looking wave lines with different process angles. As an alternative, it would be good to build a full scale model, since it would provide practice in form-building and it would also provide a chance to correct the form. Less material can be used and reduce the cutting process by Properly trimming models made of soft formal structure such as Styrofoam Iso-pink and adhesive Styrofoam, and separating the layers and using them on shape cutting of plywood with the same thickness. And by attaching the model veneer that was used in shape cutting of the model and using it as a cutting guide, we can reduce the error of work and successively build the planned form. Since this study is about the need of a full scale model for a laminated wood model and an efficient process, this study concentrates more on process.