• Journal of the Korean Society of Costume
• /
• v.67 no.3
• /
• pp.81-98
• /
• 2017

The purpose of this study is to provide basic information for the development of pants patterns with a high level of fit and comfort through calculating surface variations of lower body parts by movement, grouping them into factors, and analyzing how their surface variations link to one another. The achieved results will help determine essential elements for constructing pants patterns, such as key measurements of lower body parts, the amount of ease values and selection of fabrics, which should be taken into consideration for allowing better movement in clothing. The study required lower body 3D scanning of women for analysis, and 13 women between the ages of 20-24 participated in the scanning, which was done by using Artec Eva 3D scanner. Their scanned data were digitalized and converted to measure the values of their lower body surface length and girth in pre-determined positions such as walking, stair climbing and sitting on a chair. These measurements have been statistically analyzed through SPSS 21.0 to obtain the average amounts and rates of extension for each of the measurement item. Some of the highlighted study results are as follows: The surface length and girth measurements were grouped into 4 factors based on their average extension rates. The results from correlation analysis between measurement items within each factor demonstrated that common items linked to all the changes in the values of other items in the three movements. But in most cases, items were not always correlated with each other for different movements. The results also showed that there were correlations between girth measurements, length measurements, and girth and length measurements. Therefore, key measurements for daily pants should be determined within reasonable estimations between relevant measurement items, while the measurements for work pants, which often withstand certain postures or repetitive movements, may require measurement items that are appro priate for, and closely related to, certain movements or tasks.

• Journal of the Korean Home Economics Association
• /
• v.11 no.4
• /
• pp.374-387
• /
• 1973

This work was carried out to investigate the changes of chemical and physical properties of frying oil, when it was used many times continuously without adding new oil. Four kinds of frying oil (soybean oil, rapeseed oil, shortening and crude lard) and slices of potato and Aji (kind of fish) were used in the experiment under the condition of home cooking. Obtained results were as in the followings. 1. Acid values and peroxide values of each frying oil were under the safety level (A. V = 1.5, Po. V = 50) except crude lard, when frying works were continuously repeated five times for 50 days. 2. Changes of saponification values of each frying oil showed a decreasing tendency except the crude lard. But in cases, stickiness or clothing of oil were not seen in frying even at the five times frying. 3. Changes of optical density of each frying oil showed a decreasing tendency in all cases, according to the times of frying, especially at the first time frying. 4. Maximum heights of the shamp of each frying oil and their shampholding activites when heated, were slowly increased according to the times of frying. 5. Without concerning the cooking condition (kinds of oil, cooking material and repeating times of frying) decrement of oil in once frying was almost exactly 20g per 150g. 6. Decrements of cooking material in all cases of frying showed almost constant values, potato to be 40% and Aji 20%. 7. Differences of smoke point between new and old oil (frying repeated 5 times) showed also almost constant values. Liquid oil (soybean oil and rapeseed oil) showed number (6-$10^{\circ}C$), on the contrally solid oil (shortening and crude lard) a high number (10-$25^{\circ}C$). 8. Results of public tastic for the frying products were almost good even in that of a low five times frying, but the products, of third time frying with crude lard were expressed as disagreeable.

• Journal of Fashion Business
• /
• v.11 no.4
• /
• pp.204-220
• /
• 2007

The background of Korean Ethnical Costume was originated from those northern mounted nomadic groups, which was Scythe style Costume Culture. Through the antique records and paintings of tombs bequests hereby describe the forms of Scythian Cotume (1) Headgear : There was Conical Cap(or Pointed Cap), Feathered Cap, and Crown. (2) Clothes : Both Men and Women wore Jacket as upper garment with leftsided collars, narrow sleeves to the length of the hip line. As lower garment, they wore the tight Trousers and Kungo(:窮袴)that was attached with gusset. (3) Belts and Boots : On the upper garment bound the leather Belts that was hanged a hook that was shaped of animal form at the end. Scythian Buckles was divided into six groups, animal-shaped, animal's head shaped, animal fight-shaped, rectangle-shaped, rectangle openwork-shaped, genre scene shaped Buckle. To the Boots, they wore leather boots. (4) Ornaments : Ornaments divided into Dress Trimming(:Gold plaques), Earrings, Necklaces(;Torques), Bracelets, Rings. Scythian Gold Plaques were divided into several types according to the shape, animal style(curved beast shape, profile shape, head reversed over its back shape), round shape, quadrilateral form, star shape, flower shape, crescent shape, bundle shape, human appearance. Earrings consisted of a plain ring and pendant ring was a middle ornament hung from it to a pendants which hung was made of heart shaped leaves of the tree, beads-linked. Scythian Torques were divided into several types according to the shape, Torque with Terminal style, Spiral style, Layers style, Crescent-shaped pectoral style, Crown style. Scythian Bracelet were divided into 4 styles according to the shape, Bracelets with ends shaped like beasts style, Spiral style, Layers style, Crown with openwork style. Rings were rhomb-shaped and animal shaped styleRings (5) Animal motifs used in Scythian ornaments appears that in some cases the work was intended to be purely ornamental, while many times the motifs had symbolic meaning (such as the successful dominance of the aggressor over the victim portrayed in the attack scenes). Magical use of symbols may have been inten-ded to guarantee the power of the aggressor.

• Journal of the Korean Society of Costume
• /
• v.58 no.8
• /
• pp.1-12
• /
• 2008

This study begins by establishing the theory that paintings serve as a visual documentation of a particular era and record the ideal fashions and customs about dress behavior through the costumes represented in them and examines the close relationship between fashion and art, focusing on the influence of art on fashion, as well as that of fashion on art, for both painters and fashion designers. To attain the goal of the study, the selected objects of study are written references and dresses represented in paintings produced in the 19th century. Painters who were the subject of documentation created or popularized new fashion styles before the concept of 'fashion designer' was introduced in history. In order to capture and represent the ideal beauty of certain period, painters understood the important role of fashion. Their work not only included the designing of costumes or accessories for the sitters, but also the spreading of new fashion styles by showing the sitters wearing them. Study of the mutual relationship between fashion and art grew more vigorous among many intellectuals in a variety of fields beginning in the 19th century. The standing of fashion was elevated and the concept of the 'fashion designer' was introduced and the interest in the themes of a specific style or the background of a trend increased during this time period. Many contemporary fashion designers created dresses inspired by the costumes represented in paintings. The result of this study which focuses on the relationships between fashion, artist, fashion designer and art is that connection between fashion and art is closely and firmly formed. For several hundred years, painters were the creators as well as promulgators of fashion and fashion designers, from the 19th century until today, have obtained their creative inspiration from art.

• Fashion & Textile Research Journal
• /
• v.17 no.4
• /
• pp.646-656
• /
• 2015

This study investigates the conditions of Korean naval duty and combat uniforms to develop a new design. Survey participants consisted of, 723 Sailors ($25.3{\pm}6.9yr$ in age, $43{\pm}53$ months in work experience, $174{\pm}6cm$ in height, $71{\pm}9kg$ in body mass) serving in the Korean Navy for over 12 months. The questionnaire consisted of 72 questions about anthropometric characteristics, preferred design, textiles, wear mobility, and subjective perceptions. The results showed that the preferred colors for future naval duty uniforms were blue in summer (69%) and black in winter (62%). Digital camouflage pattern (60%) and darker colors on the inside of shirt collar (87%) and the edge of sleeves (84%) were preferred. They favored more than one pocket on the upper arm and chest of the shirts (58%), narrower width around pant legs and hems than the current clothing (63%), self-controlled elastic waist (55%) and no cargo type pocket on the pants (45%). There were requirements to alleviate excessive heat stress in summer and to protect from the cold and wind in winter. Wrinkle-free (85%), anti-bacterial (78%), water-proof (75%), oil-proof (90%), and elastic (67%) textiles were preferred for Korean navy uniforms. These results will be applied to develop the next generation Korean navy uniforms.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.3
• /
• pp.55-61
• /
• 2007

In general, it is fact that most educational institutions have lots of problems about shift of education facility and equipment because of insufficient budget. However, most high school girls live a lot of period in the school and most of them wear student uniform. Thus, it is necessary that educational environment has to be improved by actual body size of high school girls. The main objective of this study is to provide numerical guideline for the improvement of educational environment about high school girls ($17\sim19$ years) through comparison and analysis on physical standard of nation (report published in 1997). The sample for this work chosen from data which were collected and measured by Size Korea during two years $(2003\sim2004)$. In order to analyze feature of the somatotype of high school girls, analysis was performed about 734 subjects on 25 body parts such as height (7 parts), width (4 parts), thickness (4 parts), circumference (5 parts), length (4 parts) and body weight. For the specific comparison on somatotype, $R\ddot{o}hrer$ index and Mollison's comparison graph were used. The result of this study can be utilized in various fields such as design of classroom, student uniforms, facilities and equipments for education, etc.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.12 no.3
• /
• pp.43-55
• /
• 2010

The major advantages to use CAD System are that it reduce time and effort to manufacture products, and also can demonstrate the condition of the final product prior to the actual manufacturing process of the selected design using the simulation programs in CAD system. Specially in weave design, for use as Computer-Aided Weaving system, the complicated Dobby weave can figured out easily through calculating the complex weave plans of multi shafts. As to one of dobby weave structures, Supplementary warp is the warp threads which are in addition to the regular warps of the woven fabrics, and used for decorating the band or expressing some patterns. The purpose of this study is to research the weave design of Supplementary warp using Computer-Aided Weaving system, which is dobby weave design program of Weave Point. For performing this design study, it was researched the classified woven fabrics depending upon weaving processing, Computer-Aided Weaving system, and the characteristic of Supplementary warp fabrics. On the basis of the theoretical research, Supplementary warp was worked for the 24-shafts AVL computer dobby loom that applied to the various patterned images. The design work was done by Weave Point program of dobby weave, and simulated to fabrics before woven into the computer dobby loom. To see the visual images of fashion items, these simulated bobby fabrics were processed by three-dimension modeling through YoungWoo CNI CAD system. All the patterns of the Supplementary warp in this study could be applied for decorating the fashion clothing and accessories.

• Archives of design research
• /
• v.15 no.4
• /
• pp.369-378
• /
• 2002

The washing and cleaning the clothing has been considered one of the hardest task of house chores to house wife. It is still big drudgery of house keeping in the so-called high tech society. General statistics says the efforts for better washing condition has developed in minimal. It is hard task as it was before. This study is focusing the appliances for the labor reduction have developed favorably to work more effectively. In the context of home mechanization, it is very important to explore the process of the invent, development and design of washing machine. Another point of view for the washing machine is that it is one of the household artifacts, and we witness a specific character by analyzing how it was evolved. Research shows the invention, innovation, improvement and modification of the washing machine by areas and companies such as Miele and Maytag, where present established washing machine manufacturers around on Europe and USA.

• Korean Journal of Human Ecology
• /
• v.13 no.6
• /
• pp.997-1005
• /
• 2004

The purpose of this research is to measure the sensibility and preference of American consumers for domestically-manufactured cotton fabrics through 7-points scale questionnaires and the 4-dimensions and 8-axes system. The key words included such images as masculine-feminine, new-old, casual-classic, and ambiguous-orderly. The images of cotton fabrics were classified through a cluster analysis. This research also included an investigation of relationship between sensibilities for cotton fabrics and their physical characteristics. The sensibilities of cotton fabrics were classified into 4 groups: 'feminine sensibility,' 'masculine sensibility,' 'new sensibility,' and 'casual sensibility.' This result represents that American consumers' sensibility is simpler than Koreans'. The order of preference was 'feminine sensibility', 'masculine sensibility', 'new sensibility', and 'casual sensibility.' The sensibilities of cotton fabrics were explained significantly by stiffness, weight, weft density, value, and chroma. Specifically, those were more influenced by color characteristics such as value, chroma, and hue than by physical characteristics. We should be able to tell a difference in the reaction of a trading country's consumers and domestic consumers to domestically-manufactured cotton fabrics through comparing this research with the previous work(Shin & Lee, 2002). Additionally, we will be able to establish a basic strategy for successfully advancing Korean fabrics into the American domestic textile industry. In this way we can expect to increase the competitive power of our domestic clothes brands.

• Safety and Health at Work
• /
• v.6 no.3
• /
• pp.256-262
• /
• 2015

Background: Heart attack is the most common cause of line-of-duty death in the fire service. Daily aspirin therapy is a preventative measure used to reduce the morbidity of heart attacks but may decrease the ability to dissipate heat by reducing skin blood flow. Methods: In this double-blind, placebo-controlled, crossover study, firefighters were randomized to receive 14 days of therapy (81-mg aspirin or placebo) before performing treadmill exercise in thermal-protective clothing in a hot room [$38.8{\pm}2.1^{\circ}C$, $24.9{\pm}9.1%$ relative humidity (RH)]. Three weeks without therapy was provided before crossing to the other arm. Firefighters completed a baseline skin blood-flow assessment via laser Doppler flowmetry; skin was heated to $44^{\circ}C$ to achieve maximal cutaneous vasodilation. Skin blood flow was measured before and after exercise in a hot room, and at 0 minutes, 10 minutes, 20 minutes, and 30 minutes of recovery under temperature conditions ($25.3{\pm}1.2^{\circ}C$, $40.3{\pm}13.7%\;RH$). Platelet clotting time was assessed before drug administration, and before and after exercise. Results: Fifteen firefighters completed the study. Aspirin increased clotting time before and after exercise compared with placebo (p = 0.003). There were no differences in absolute skin blood flow between groups (p = 0.35). Following exercise, cutaneous vascular conductance (CVC) was $85{\pm}42%$ of maximum in the aspirin and $76{\pm}37%$ in the placebo groups. The percentage of maximal CVC did not differ by treatment before or after recovery. Neither maximal core body temperature nor heart rate responses to exercise differed between trials. Conclusion: There were no differences in skin blood flow during uncompensable heat stress following exercise after aspirin or placebo therapy.