• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.3
• /
• pp.331-337
• /
• 2018

The decommissioning of nuclear power plants is generally executed in five steps, including preparation, decontamination, cutting/demolition, waste disposal and environmental restoration. So, for efficient decommissioning of nuclear power plants, worker safety, effects compared to cost, minimization of waste, possibility of reuse, etc., shall be considered. Worker safety and measurement technology shall be secured to exert optimal efficiency of nuclear power plant decommissioning work, for which accurate measurement technology for systems and devices is necessary. Typical In-Situ methods for decommissioning of nuclear plants are CZT, Gamma Camera and ISOCS. This study used ISOCS, which can be applied during the decommissioning of a nuclear power plant site without collecting representative samples, to take measurements of the S/G Water Chamber. To validate the measurement values, Microshield and the GEANT4 code was used as the actual method were used for modeling, respectively. The comparison showed a difference of $1.0{\times}10^1Bq$, which indicates that it will be possible to reduce errors due to the influence of radiation in the natural environment and the precision of modeling. Based on the research results of this paper, accuracy and reliability of measurement values will be analyzed and the applicability of the direct measurement method during the decommissioning of NPPs will be assessed.

• Journal of Internet Computing and Services
• /
• v.17 no.2
• /
• pp.59-65
• /
• 2016

The result of analyzing the cognitive reaction due to the color environment has been applied to various filed especially in medical field. Moreover, the study about the identification of patient's condition and examination the brain activity by collecting the bio-signal based on the color environment is being actively conducted. Even though, there were a variety of experiments by convention the color environment using a light or LED color, it still has a problem that affects the psychological information. Therefore, our proposed system using a HMD (Head Mounting display) to provide a completed color environment condition. This system uses the BMS(Biomedical System) to collect the biometric information which responds to the specific color condition and the human body response information can be measured by the development the Memory and Attention test on Mobile phone. The collection of Biometric information includes electro cardiogram(ECG), respiration, oxygen saturation (Sp02), Bio-impedance, blood pressure will store in the database. In addition, we can verify the result of the human body reaction in the color environment by Memory and Attention application. By utilizing the reaction of the human body information that is collected thought the proposed system, we can analyze the correlation between the physiological information and the color environment. And we also expect that this system can apply to the medical diagnosis and treatment. For future work, we will expand the system for prediction and treatment of Alzheimer disease by analyzing the visualization data through the proposed system. We will also do evaluation on the effectiveness of the system for using in the rehabilitation program.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.335.2-335.2
• /
• 2016

The fixed negative charge of the Al2O3 passivation layer gives excellent passivation performance for both n-type and p-type silicon wafers. For the best passivation quality, annealing is known to be a prerequisite step and a lot of studies concerning annealing effect on the passivation characteristics have been performed. Meanwhile, for manufacturing a crystalline silicon solar cell, firing process is applied to the Al2O3 passivation layer. Therefore, study on not only annealing effect but also on firing effect is necessary. In this work, Al2O3 passivation performance (minority carrier lifetime) for p-type silicon wafer was evaluated with Quasi-Steady-State Photoconductance(QSSPC) measurement after annealing at different temperatures. For the samples which showed different aspects, C-V measurement was performed for the cause - whether it is due to the chemical effect or field-effect. The change in Al2O3 passivation property after firing processes was investigated and the mechanism for the change could be estimated.

• Journal of radiological science and technology
• /
• v.38 no.3
• /
• pp.237-244
• /
• 2015

Health professionals in nuclear medicine were known that they get high radiation exposure. To reduce radiation exposure, using shielding materials is needed. In this study, we analyzed the shielding effect about apron during 18F-FDG treatment by using simulation based on Monte Carlo techniques and actual measurement. As a result, absorbed dose distribution of organ varies with handling position of the source. Dose reduction ratio by lead thickness of apron tended to decease, when handling position of the source come close to organ and away from radiation source for simulation. In the case of actual measurement with the dosimetry device, It showed that mean spatial dose distribution was different due to characteristics of dosimetry device. However, spatial dose rate was exponentially reduced according to distance with increasing lead content.

• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.223-227
• /
• 2013

Purpose: The objectives of this study were to develop a general purpose baler system that is appropriate for the domestic forage cultivation environment and operated by the medium size tractor for production of bale silage made of green forage crops, and to test its performance. Methods: In a first experiment, the time of formation per one bale and densities of bales that are produced from bale system, were measured. In a second experiment, power requirement was measured by a power measurement system manufactured during bale system work. Results: The power measurement system was constructed with strain-gage sensors to measure torque of a PTO axle and proximity sensor to measure rotating speed of a PTO axle. Thus, the power requirement was calculated by PTO torque and PTO rotating speed. For evaluation of bale quality, the samples of bales were analyzed for contents of moisture, ADF, NDF and TDN. Conclusions: If the results of this study will be utilized, the coefficient of utilization of agricultural machinery will be increased by the operation of a medium size tractor that is a major disseminated tractor in farm, and it will contribute tremendously to make a forage production base for livestock farms.

• Korean Journal of Health Education and Promotion
• /
• v.20 no.1
• /
• pp.19-39
• /
• 2003

Purpose: Although there is a lot of secondary data available for comparing community health status and planning health policies in terms of large area such as metropolitan cities or provinces, there is restricted data for establishing community health policies of the small areas such as towns, Gun(i.e., districts), and Gu. Specifically, the problems of producing a valuable index for health promotion in small areas are three fold: First, there is not an appropriate index model for measuring a small community health status. Second, a large part of secondary data in the small areas has been produced in an irregular time interval. In addition, all valuable data can not be integrated without time consuming work. Thus this study tries to establish a health promotion index model for assisting community health promotion initiatives of local governments. Methods and materials: Literature review, community health specialist consultation and a questionnaire survey was performed. Results: Based on Dever's model, a prototype of health promotion indicators was proposed and modified by the community health specialists. 15 classification scheme of statistical yearbook reorganized into the six areas. Those six areas were comprised in 24 indicator class with 96 specific indicators. Through further modification processes by a questionnaire survey, we developed a health promotion indicator model that contains six areas with 23 indicator class encompassed by 87 specific indicators. Conclusions: This study proposed a model of health promotion indicator comprised in the six areas with 23 indicator classes for measuring small area health promotion status. However, more specific or additional data in human biology, environment, and socioeconomic data is essential for producing a stronger model for health promotion measurement.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.101-104
• /
• 1998

We report some methods for measuring a LiNbO$_3$ optical phase modulator bandwidth. Since Mach-Zehnder waveguide type, one of methods for modulation bandwidth measurement, is comparatively simple and useful, it was adapted in this work. In order to confirm this method, the waveguide of single and Mach-Zehnder type were fabricated on the same wafer. The Mach-Zehnder interferometric waveguide and the single channel waveguide were used for the measurement of the phase modulator's driving voltage and bandwidth for device fabrications, respectively. Ti-860$\AA$ in-diffusion was achieved in a wet-bubbling oxygen environment at 105$0^{\circ}C$/8hours. LINbO$_3$ internal chips were pigtailed to PMF(polarization maintaining fiber)/SMF(single mode fiber) using an epoxy curing technique. Examined were optical properties such as an insertion loss, propagation loss and mode size, and the loss mechanism of optical coupling between an optical fiber and a waveguide was considered.

• Journal of Korean Academy of Nursing
• /
• v.32 no.2
• /
• pp.155-164
• /
• 2002

With the dynamically changing environment of society, managing change is the vital element of organizations's survival and growth. Health care organizations have expended enormous resources to restructure patient care delivery. Despite the growing literature describing these organizational innovations, there is a paucity of credible data that reflects systematic measurement and evaluation of such changes. This study examined the nurses' psychological response toward the work process redesign, newly introduced by the nursing department in a acute care hospital. The aim of the study was to figure out how nurses's general perception of change and perceived attributes of change affected their acceptance of change during the organizational transition. This was descriptive- correlational. The sample for the study included 50 head nurses and 135 staff nurses. Data was analyzed using SPSS PC+, version 10.0. The major findings of the study were as follows: First, the mean score of the perception of change was 71.2(SD=13.8) with the range of 0-100, which means nurses generally perceived change positively. There were significant differences in perception of change by gender and education level. Head nurses perceived change more positively than staff nurses. The higher education level showed the more positive view of change. Second, among the perceived attributes of change, trialability had the highest mean score, which means nurses perceived the change more positively if it is testable on a limited basis. Relative advantage was perceived the most negatively. Finally, factors influencing the acceptability of the work-process redesign were perceived comparability, complexity, relative advantage, and observability, which accounted for 43.7% of the variance in the acceptability of change. This study evaluated the preliminary effects of the nursing process for reengineering, focusing on nurses' acceptability towards change. The usefulness of this research study was to determine the factors influencing acceptance of organizational members during transitional periods of change and to suggest effective strategies for increasing adoption as well as for decreasing resistance to change.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.1
• /
• pp.27-35
• /
• 2015

Objectives: To investigate safety and health management, conditions in factories or facilities handling radiation-generating devices and radioactive isotopes were reviewed in terms of regulations of radiation safety control in Korea. Radiation exposure levels generated at those facilities were directly measured and evaluated for establishing an effective safety and health management plan. Methods: Government organizations with laws and systems of radiation safety and health were investigated and compared. There are three laws governing radiation-related employment such as occupational safety and health acts, nuclear safety acts, and medical service acts. We inspected 12 workplaces as research objects:four workplaces that manufacture and assemble semiconductor devices, three non-destructive inspection workplaces that perform inspections on radiation penetration, and five workplaces in textile and tire manufacturing. Monitoring of radiation exposure was performed through two methods. Spatial and surface monitoring using real-time radiation instruments was performed on each site handling radiation generating devices and radioactive isotopes in order to identify radiation leakage. Results: According to the occupational safety and health act, there is no legal obligation to measure ionizing radiation and set dose limits. This can cause confusion in the application of the laws, because the scopes and contents are different from each other. Surface dose rates in radiation generating devices such as implanters, thickness gages and accelerators, which were registered according to nuclear safety acts, using surveymeters, and seven of 36 facilities(19.4%) exceeded the international standards for surface radiation dose of $10{\mu}Sv/hr$. Conclusions: The results showed that occupational health and safety acts require a separate provision for measuring and assessing the radiation exposure of workers performing radiation work. Like noise, ionizing radiation will also periodically be controlled by including it in the object factors of work-environment measurement.

• Environmental Analysis Health and Toxicology
• /
• v.19 no.2
• /
• pp.169-176
• /
• 2004

ETS (environmental tobacco smoke) is composed of exhaled mainstream smoke (MS) from the smoker, sidestream smoke (SS) emitted from the smoldering tobacco between puffs and contaminants that diffuse through the cigarette paper and mouth between puffs. These emissions contain both vapor phase and particulate contaminants. ETS is a complex mix of over 4,000 compounds. This mix contains many known or suspected human carcinogens and other toxic agents. More of these toxic compounds are found in SS than in MS. Workplace exposure to ETS can result in significant smoke intake, and passive smoke exposure may be related to impair respiratory function and an increase risk of lung cancer in nonsmokers. For nonsmokers sharing a work environment with cigarette smokers, the workplace must be considered hazardous independently of any specific industrial toxic exposure. The risk is particularly important when a high percentage of the workers smoke or where smokers and nonsmokers work in poorly ventilated areas. Nicotine is converted in the body to cotinine; cotinine therefore can be used as an indirect measure of a person's recent exposure to tobacco smoke. Levels of nicotine in hair and levels of cotinine in body fluids (saliva and urine) have been shown to increase with increasing environmental nicotine levels and with self-reported ETS exposure. The measurement of nicotine or cotinine in hair may be more appropriate for longer-term exposure to tobacco. The purpose of this study is to comparing airborne nicotine levels and hair cotinine level in restaurant workers. Concentration of airborne nicotine and hair nicotine (and cotinine) is closely related to exposed frequency of sidestream smoke in the workplace. Nicotine in hair is a better predictor of airborne nicotine than hair cotinine. Hair nicotine can be a useful tool to assess ETS exposure interventions. It may have limiting levels of ETS exposure by placing regulatory restrictions on smoking in workplaces and in public spaces.