• 한국건설관리학회논문집
• /
• 제10권1호
• /
• pp.36-44
• /
• 2009

건설공사 한 프로젝트의 전체공기는 개별 작업들이 수행된 날짜의 합이라 할 수 있다. 개별 작업들에서 지연이 발생할 경우 전체 공기 또한 늦어지기 마련이다. 이러한 개별 작업의 계획상에서 작업이 수행될 확률을 높인다면 프로젝트의 공기달성 확률 또한 높아지게 될 것이다. 따라서, 계획상의 작업 실행여부 확인을 위하여 건설 생산프로세스에서 각 작업의 수행 저해하는 제약요인을 도출하여 작업여건분석의 실시를 통해 저해요인의 사전 제거와 작업간의 상호의존성을 파악으로 작성된 개별 작업계획들의 실행 가능성 확인함으로써 공사전체의 공기지연을 방지하는 체계를 구축하고자 한다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.637-642
• /
• 2007

건설공사 한 프로젝트의 전체공기는 개별 작업들이 수행된 날짜의 합이라 할 수 있다. 개별 작업들에서 지연이 발생할 경우 전체 공기 또한 늦어지기 마련이다. 이러한 개별 작업의 계획상에서 작업이 수행될 확률을 높인다면 프로젝트의 공기달성 확률 또한 높아지게 될 것이다. 따라서, 계획상의 작업 실행여부 확인을 위하여 건설 생산프로세스에서 각 작업의 수행을 저해하는 제약요인을 도출하여 작업여건분석을 한다. 작업여건분석을 통해 저해요인 사전 제거와 작업간의 상호의존성을 파악으로 작성된 개별 작업계획들의 실행 가능성 확임함으로써 공사전체의 공기지연을 방지하는 체계를 구축하고자 한다.

• 한국정밀공학회지
• /
• 제13권9호
• /
• pp.84-93
• /
• 1996

This paper describes the development of new feature positioning method which embedded into the top-down assembly modeling system supporting conceptual design. In this work, the user provides the geometric constraints representing the position and size of features, then the system calculates their proper solution. The use of geometric constraints which are easy to understand intuitively enables the user to represent his design intents about geometric shapes, and enables the system to propagate the changes automatically when some editing occurs. To find the proper solution of given constraints, the Selective Solving Method in which the redundant or conflict equations are detected and discarded is devised. The validity of feature shapes satisfying the constraints can be maintained by this technique, and under or over constrained user-defined constraints can also be estimated. The problems such as getting the initial guess, controlling the multiple solutions, and dealing with objects of rotational symmetry are also resolved. Through this work, the feature based modeling system can support more general and convenient modeling method, and keeps the model being valid during modifying models.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 가을 학술발표회 논문집
• /
• pp.17-24
• /
• 1995

This work proposes an optimality criteria applicable to the optimum design of plane frames. Stress constraints as well as displacement constraints are treated as behavioural constraints and thus the first order approximation of stress constraints is adopted. The design space of practical reinforced concrete frames with discrete design variables has been found to have many local minima, and thus it is desirable to find in advance the mathematical minimum, hopefully global, prior to starting to search a practical optimum design. By using the mathematical minimum as a trial design of any search algorithm, we may not full into a local minimum but apparently costly design. Therefore this work aims at establishing a mathematically rigorous method ⑴ by adopting first-order approximation of constraints, ⑵ by reducing the design space whenever minimum size restrictions become "active" and ⑶ by the of Newton-Raphson Method.

• International Journal of Control, Automation, and Systems
• /
• 제1권2호
• /
• pp.178-183
• /
• 2003

This work is a modified version of an earlier work that was based on ellipsoidal type feasible sets. Unlike the earlier work, polyhedral types of invariant and feasible sets are adopted to deal with input constraints. The use of polyhedral sets enables the formulation of on-line algorithm in terms of QP (Quadratic Programming), which can be solved more efficiently than semi-def algorithms. A simple numerical example shows that the proposed method yields larger stabilizable sets with greater bounds on disturbances than is the case in the earlier approach.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 가을 학술발표회 논문집
• /
• pp.1-8
• /
• 1995

This work presents a new method to deal with buckling constraints. The mathematical optimization process of truss structures proposed earlier by the author has been proved to be the most rigorous method. The inclusion of buckling constraints, however, gives rise to a new problem The allowable compression stress of a member changes from one design iteration to another. This changing stress limit creates a good deal of noise in selecting active constraints and makes the solution process unstable. This problem can be overcome by introducing relaxation parameters. This work, however, aims at establishing a more rigorous method by containing the allowable compression stress in the left hand side of the associated constraint.

• 한국지역사회생활과학회지
• /
• 제22권4호
• /
• pp.599-613
• /
• 2011

This study aimed to provide an efficient time management scheme for farmers by analysing how they experience time constraints in spending their time and understand time management. Firstly, farmers found that they didn't have enough time for farm keeping as a result of house work obligations. It was caused by excessive time for agricultural work. Thus, 93.7% of respondents recognized that ‘they were pressed for time' because there is relatively less time to spend for socio-cultural and physiological matters. In addition, 83.0% responded that they felt the pressure of something. Respondents who were in forties reduced their sleeping hours due to lack of time. The majority of people who were in the farmhouse doing controlled horticulture cannot enjoy their own time for leisure owing to a lack of time. Secondly, respondents under thirty-nine years of age were solving the problems of time constraints as prioritizing matters, planning handling time and utilizing household instruments. On the other hand, respondents who were in forties found the solution by reflecting on their conduct toward a time consumption plan, self-evaluation and received help from their family and/or neighbors. A group of respondents who had already graduated from college or higher education often reflected on their conduct and self-evaluated. Respondants who participatied in farmhouse controlled horticulture, generally took turns in managing their house work. For reducing farmers' time constraints and managing their time efficiently, they should standardize matters done repeatedly and also manage time by dividing work among family members. Furthermore, if a long-term time scheme such as more than a month is established and practiced, time constraints may be somewhat solved.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.215-218
• /
• 1996

In work scheduling problems, scheduling constraints are not absolutely rigid; they may be changed depending on the scheduling aspect effected. In order to cope with changes in scheduling constraints and assignment strategies and to optimize scheduling results quickly, this paper will propose a new scheduling method which combines knowledge engineering and mathematical programming techniques.

• 정보처리학회논문지D
• /
• 제13D권2호
• /
• pp.191-198
• /
• 2006

다양한 환경 속에서 기업이 업무의 효율성과 효과적인 업무처리를 해결하기 위해서 핵심정보시스템으로 워크플로우를 도입하고 있다. 최근에는 워크플로우 확장으로 비즈니스 프로세스 관리(BPM: Business Process Management)가 기업 소프트웨어 시장의 가장 중요한 부분을 차지하고 있다. 비즈니스 프로세스 관리에서 워크플로우는 핵심적인 역할을 수행하고 있지만, 워크플로우 연구의 대부분은 복잡한 업무의 정확한 실행 순서를 찾기 위한 시간적인 제약들에 집중되어 있다. 그런 이유에서 워크플로우 스케줄링의 대부분은 처리해야 할 다양한 자원의 모델링에 집중되었으며, 자원과 연관된 제약조건에서의 워크플로우 스케줄링에 대한 관심은 미흡한 편이다. 본 논문에서는 자원할당 제약조건에 따른 워크플로우 스케줄링에 적합한 CTR(Concurrent Transaction Logic) 기반의 변형 템플릿(Transformation Template)과 논리적 프레임워크를 제안한다. 변형 템플릿은 워크플로우 변형 템플릿(Workflow Transformation Template)과 제약조건 변형 템플릿(Constraint Transformation Template)으로 구성된다. 이 변형 템플릿은 기존의 워크플로우를 자원할당 제약조건 하에서 새로운 워크플로우를 논리적으로 표현하는데 용이하게 사용할 수가 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.108.3-108
• /
• 2001

In this work, we consider a real time optimal control problem of mechanical systems with restrictions for actuators i.e. input restrictions and constraints for the movable area i.e. state constraints. First, we formulate an optimal control problem which evaluates the cost function for a finite time horizon with input restrictions and state constraints of a wheeled vehicle as an example of mechanical systems. In this problem, the differentiability of the cost function is not required and this implies that the problem cannot be solved analytically. Therefore, in this work, we use an optimization method to solve the optimal control problem and a new real time optimization method is proposed to solve the problem. In this method, we provide a parameter that indicates the ...