• Nuclear Engineering and Technology
• /
• v.54 no.8
• /
• pp.2809-2818
• /
• 2022

In this investigation work, liquid-liquid extraction (L.L.E) through three distinctive frameworks have been examined for assurance of slip velocity (S.V), and characteristic velocity (C.V) in a non-center rotating column (N.C.R.C) with a wide extend of factors. Three double frameworks with distinctive interfacial tension comprising of toluene-water (high interfacial tension), n-butyl acetate-water (medium interfacial tension), and n-butanol-water (low interfacial tension) were investigated for tests. Two common relationships for the expectation of S.V and C.V, including phase stream rates, rotor speed, column geometry additionally physical properties, are displayed. The recommended relationships were compared with test information gotten from the writing and the display examination. Findings of this study, the present proposed correlations are more accurate than those previously reported.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.3
• /
• pp.49-53
• /
• 2006

A high temperature superconductor (HTS) has been developed for power applications such as power cables, fault current limiters and superconducting magnetic energy storage devices. For such applications it is required to understand the DC voltage-current characteristic of the HTS. which is important in analyzing AC loss and flux flow loss quantitatively. In this work, we have experimentally investigated influence of several factors, e.g. critical current density. degradation and AC external magnetic field, on the DC voltage-current characteristic. The measured results have been discussed in engineering application point of view.

• Journal of Family Resource Management and Policy Review
• /
• v.17 no.2
• /
• pp.19-35
• /
• 2013

The purpose of this study is to analyze the effective factors that influence subjective cognition, conflict degree of work-family balance, and cognition of family strength according to general characteristic factors, working environmental factors, and home environmental factors, as well as analyze the relationships among subjective cognition, conflict degree, and cognition of family strength. The main data source for analysis in this study is the Second National Survey of Korean Families by the Ministry of Gender Equality and Family in 2010. The survey includes the analysis of 419 respondents who have a dual income and live with their wife. The collected data are analyzed using SPSS 19.0. The results of the study are as follows. First, subjective cognition of work-family balance is influenced by satisfaction of work, division of housework, and care of family. Second, the conflict degree of work-family balance is influenced by age, working week, and satisfaction with work. Third, the relationship between subjective cognition and conflict degree of work-family balance is a negative correlation. The relationship between subjective cognition of work-family balance and cognition of family strength is a positive correlation but the difference between conflict degree of work-family balance and cognition of family strength is not significant. Finally, for the married men, the working environmental factor is a significant factor for the work-family balance. And the higher the satisfaction of work and division of domestic work, the greater is the balance between work and family. This suggests that they also have a higher cognition of family strength.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.5 no.4
• /
• pp.149-157
• /
• 2007

Hair style was mean of visual symbol that display position or wealth about human life. Also, have spoken for cultural value as human body plastic art that speak for the age. I wished to study about modeling of hair style and interrelationship of color by analyzing systematically laying stress on color through contest creation work consisted in beauty art congress. Urpose of this study is as following. First, examines domestic' outside great council work head change by era, and studies Hair Work's change in work head. Second, Hair Color's change that appear in domestic' outside contest work head studies effect that get in work. Method of study runs parallel literature study and supporting research, utilized domestic' outside literature, connection paper, magazine, picture data etc. To literature study, and work picture data examined laying stress on work that is choosesed picture dataworld beauty use association (OMC) data etc. that appear in domestic' outside beauty art magazine to examine closely specification and stability of beauty art game style and participates in domestic and world beauty art contest. In this study, domestic' characteristic, and effect that collar gets in work head of collar that collects outside contest participating in an athletic contest hair style by ($1981{\sim}$until present) by year and appears in contest work head and in work since analyzing study forward $2007{\sim}2008$ year direction of collar. First, stream of whole color of the 1980s Brown gave highlight color point partially to basis, and was consisted of creative style and do Gold base color on the whole in Hair by Night item. Second, various Hair color was popularized in the 199Os, and Tuton's color appeared in beauty art game work, and I contributed to improve technique that step-up gradation color appears and does technique to highlight in neon orange in creative style and Hair by Night item by entrance on the stage of neuter gender color.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.505-511
• /
• 1993

The results were obtained with changes according to the surface roughness of work roll and method to make the peak count on the roll in the temper rolling, and factors to affect to the work roll surface in actual rolling machine(ie. Temper mill). Conclusions are as follows. 1. E.D.T(Electro-discharge texturing)roll is more uniform roughness distribution than shot blasted roll and it's life time is two timees longer than that of shot blasted because it has more sine wave roughness. 2. The higher peak count of surface roughness, the more time is necessary to work roll texturing In shot blasting method, Surface roughness is relating to the grit size,impeller speed and hardness of roll material, But is can't control the peak count. 3. In shot blast texturing, Surface roughness of temper rolled strip which is transfered surface roughness of work roll is more ununiform than that of E.D.T roll 4. E.D.T roll has more uniform than the shot blasted roll and has more peak count than that of shot blasted roll. The surface of painted strip to image clarity is superior to that of shot blasted roll because E.D.T roll has more peak count and smooth surface.

• Journal of the Korea Institute of Building Construction
• /
• v.4 no.3
• /
• pp.83-91
• /
• 2004

With labor shortage and high-wage era, the construction cost is rising and the construction business is dull, demanding the construction environment of Korea to raise profitability through major cost savings and rationalization of construction management. However, although reinforcing bar(rebar) work, which greatly effects the building's safety, endurance, and construction time, is an important phase in construction, it holds serious problem of quality and productivity deterioration due to its characteristic of intensive-labor and maintaining of old work methods resulting in poor management, and costs increase. Therefor in this study to investigate current situation and problems of rebar work and to find methods of betterment, a survey was conducted to site engineers and individuals in division of cost estimate of domestic construction company. The survey questions were on the subjects of (1) calculating rebar quantity, (2) ordering and procurement, (3) rebar cutting and bending, and (4) rebar work management. Method of improvement was sought by analyzing the results of the survey

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.1048-1052
• /
• 2005

In Korean cases, the occupation of building construction is below 10% of the total industry workers but from a accident rate point of view, it is a risk serious industry and it's hazard is very considerable which accident rate is up to 30% of the total industry workers. The reason of high accident rate of the building construction is its own characteristic, hazard of the work in which is implicated and the shortage of safety counter plan and information, so it is most required to the building construction that educating, training, short and long period approaching to prevent the hazard. The safety information of building construction which is related to safety accident is divided into human and material such as hazard, work situation, cause and counter plan. The existing hazard cases imply all of the information about the work type and work progress of the building construction, so if the research of the every fact is well accomplished, we can obtain the useful information and prevent the hazard of building construction. From this point of view, the emphasis of this study is based on analyzing the cause of hazard first, suggesting the safety information each part of work type and work progress second, and finally making the all existing hazard cases to the Data Base and developing the safety information system.

• Journal of Biomedical Engineering Research
• /
• v.37 no.2
• /
• pp.75-83
• /
• 2016

Nursing staffing is of major interest in hospital management, however, no practical method has been developed. The present study proposed a mathematical model based on the patient classification system for nursing staffing optimization. A few characteristic parameters possibly determined experimentally and/or empirically were introduced followed by systematic calculation of the required number of nurses. An essential concept of the model is the unit work load defined as the amount of nursing work performed on single patient per unit time, where the work load is defined as the number of nursing staffs multiplied by the working hours. The unit work load was considered to vary with the patient classification level as well as the working time during a day, both of which were represented by corresponding parameter values. The number of patients for each class and the number of working hours were multiplied to the unit work load, and added up to obtain the total required work load. As the next step, the averaged number of hours that a nurse could provide per day was formulated considering the degree of nursing practice experience into 3 levels. Finally, the appropriate number of nursing staffs was calculated as the total work load divided by the average working hours per nurse. The present technique has a great advantage that the number of nursing staffs to fulfill the required work load is systematically calculated once the characteristic parameters are appropriately determined, leading to instant and fast evaluation. A practical PC program was also developed to apply the present model to nursing practice.

• Communications for Statistical Applications and Methods
• /
• v.6 no.3
• /
• pp.687-694
• /
• 1999

The goodness of fit statistics of normality plots are obtained using the Receiver Operating Characteristic(ROC) method. This work is intended to compare with Shapiro-Wilk W statistic. Wel will use and discuss an accuracy of the test and the best cut-off value which minimizes the sum of the type I and II error probabilities.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.6
• /
• pp.657-662
• /
• 2017

This paper presents the reversible electrolysis characteristics of a solid oxide fuel cell (SOFC) using a $10{\times}10cm^2$ anode supported planar cell with an active area of $81cm^2$. In this work, current-voltage characteristic test and reversible electrolysis cycle test were carried out sequentially for 2,114 hours at a furnace temperature of $700^{\circ}C$. The current-voltage characteristics for reversible electrolysis mode was measured at a current of ${\pm}26.7A$ under various $H_2O$ utilization conditions. The reversible electrolysis cycle was performed 50 times at a current of ${\pm}32.4A$. As a result, The performance degradation of SOEC mode was larger than that of SOFC mode.