• 한국콘텐츠학회논문지
• /
• 제11권5호
• /
• pp.358-368
• /
• 2011

본 연구는 건강가정지원센터 상담사업 건강가정사의 직무연구를 통해 직무우선순위와 직무수행요건, 직무역량의 중요도와 교육요구도를 파악하고 핵심역량과 역량개발영역을 추출해내고자 수행되었다. 조사는 센터 내 상담사업분야에 종사하는 상근 및 비상근 건강가정사들을 대상으로 설문을 통해 이루어졌다. 분석결과 사업의 홍보 부분이 전략적 강화업무로 거론되었으며, 가족상담, 프로그램 기획, 사례회의, 슈퍼비젼등은 기본업무로 인식하고 있었다. 담당인력의 수행요건은 석사수준의 학력과 1-3년의 관련기관 근무경력, 가족상담사, 건강가정사, 사회복지사, 상담심리사 등의 자격인 것으로 나타났다. 그 외 직무역량 중요도와 교육요구도를 토대로 핵심역량과 역량개발영역을 추출하였는데 이것으로 상담영역 건강가정사의 직무 및 보수교육 콘텐츠 개발이 가능하다.

• 대한의용생체공학회:의공학회지
• /
• 제28권6호
• /
• pp.768-776
• /
• 2007

A new type of the fluid circulation blood pressure simulator was proposed to enhance the blood pressure simulator used for the development and evaluation of automatic sphygmomanometers. Various pressure waveform of fluid flowing in the pipe was reproduced by operating the proportional control valve after applying a pressure on the fluid in pressurized oil tank. After that, appropriate fluid was supplied by operating the proportional control valve, which enabled to reproduce various pressure wave of the fluid flowing in the tube. To accomplish this work, the mathematical model was carefully reviewed in cooperating with the proposed simulator. After modeling the driving signal as input signal and the pressure in internal tube as output signal, the simulation on system parameters such as internal volume, cross-section of orifice and supply pressure, which are sensitive to dynamic characteristic of system, was accomplished. System parameters affecting the dynamic characteristic were analyzed in the frequency bandwidth and also reflected to the design of the plant. The performance evaluator of fluid dynamic characteristic using proportional control signal was fabricated on the basis of obtained simulation result. An experimental apparatus was set-up and measurements on the dynamic characteristic, nonlinearity, and rising and falling response was carried out to verify the characteristic of the fluid dynamic model. Controller was designed and thereafter, simulation was performed to control the output signal with respect to the reference input in the fluid dynamic model using the proposed proportional control valve. Hybrid controller combined with an proportional controller and feed-forward controller was fabricated after applying a disturbance observer to the control plant. Comparison of the simulations between the conventional proportional controller and the proposed hybrid simulator indicated that even though the former showed good control performance.

• 복식
• /
• 제64권6호
• /
• pp.102-119
• /
• 2014

The purpose of this study is to develop various designs through renewing and changing perception of accessories by examining various and arbitrary Kitsch. For the method of this study, literature review was mainly used for research of formative characteristics in Kitsch fashion. 798 pieces of work from fashion magazines and website with a focus on Milan, Paris, London and New York collections, in the decade of 2000-2010 were collected. The results of this study are as follows. First, the characteristic of exaggeration is classified into two types: the visual exaggeration, which is characterized by psychological expression through excessive images and (2) the collecting exaggeration, which is not simple but a want of large quantities. Second, the characteristic of satire is classified into two types: (1) the imitation-satire, which satirizes messages to societies with creative humor by using easily consumed materials and (2) the resistance-satire, which is destructive and offensive against isolation and desolation of a capitalistic society. Third, the characteristic of amusement is classified into two types: (1) the playful-amusement, which raises a laugh slyly by using clever materials and (2) the childish-amusement, which involves childish imagination and humor-sense because of desire to be a child. Fourth, the characteristic of nostalgia is classified into two types: (1) the romantic character expressing a departure from modern society, which is desolate because of the urbanization process, and (2) the intermediate character recreating an esthetic category by interacting with different and relative elements. Fifth, the characteristic of inappropriateness is expressed through a deliberate mistake, and it denies existing senses of beauty by overturning common sense and creating new senses of beauty, expressions in distortion and modification of stereotype.

• 대한전자공학회논문지TC
• /
• 제48권9호
• /
• pp.47-53
• /
• 2011

본 논문에서는 커넥터의 특성임피던스 추출, 분석 방법 및 설계 변경 방법을 제안하고 임피던스를 정합하여 신호 전달 특성을 개선한다. 3차원 FEM(Finite Element Method) 전자기장(Electro-Magnetic Field) 시뮬레이터를 이용하여 커넥터의 S-파라미터를 계산하고 반사손실 및 삽입손실을 추출한다. 커넥터의 신호 전달 특성은 반사손실이 0.9 GHz 이후부터 -20 dB 이상의 값으로 높게 나타났다. 신호 전달 특성이 낮은 원인을 파악하기 위해서 회로 해석 시뮬레이터를 이용하여 커넥터의 등가 회로 모델을 추출하고 특성임피던스를 계산하였다. 커넥터의 특성임피던스는 $90.3{\Omega}$으로 임피던스 부정합이 발생하여 신호 전달 특성이 저하되었다. 따라서 신호 전달 특성을 개선할 목적으로 임피던스를 정합하기 위해서 커넥터의 커패시턴스를 증가시켰다. 이러한 설계 방안으로 커넥터 신호선의 유효 면적을 확장하고, 커넥터의 몸체 소재로 고유전체를 사용하였다. 설계 변경된 커넥터의 특성임피던스는 $58.6{\Omega}$으로 임피던스 정합에 보다 근접하여 커넥터의 반사손실이 대략 10 dB 향상되었다. 신호선의 유효 면적 증가에 의한 반사손실 개선과 고유전체의 적용으로 전자기파의 신호선 주변 집중에 의해서 삽입손실 또한 개선되었다.

• ETRI Journal
• /
• 제35권5호
• /
• pp.797-807
• /
• 2013

In this paper, an input receiver with a hysteresis characteristic that can work at voltage levels between 0.9 V and 5 V is proposed. The input receiver can be used as a wide voltage range Schmitt trigger also. At the same time, reliable circuit operation is ensured. According to the research findings, this is the first time a wide voltage range Schmitt trigger is being reported. The proposed circuit is compared with previously reported input receivers, and it is shown that the circuit has better noise immunity. The proposed input receiver ends the need for a separate Schmitt trigger and input buffer. The frequency of operation is also higher than that of the previously reported receiver. The circuit is simulated using HSPICE at 0.35-${\mu}m$ standard thin oxide technology. Monte Carlo analysis is conducted at different process conditions, showing that the proposed circuit works well for different process conditions at different voltage levels of operation. A noise impulse of ($V_{CC}/2$) magnitude is added to the input voltage to show that the receiver receives the correct logic level even in the presence of noise. Here, $V_{CC}$ is the fixed voltage supply of 3.3 V.

• 한국정보시스템학회지:정보시스템연구
• /
• 제19권3호
• /
• pp.181-208
• /
• 2010

As knowledge-based society comes to the fore, sharing knowledge becomes a hot issue. Among various types of knowledge, a significance of software(applications) and contents is a huge in a current society. Moreover, along with appearance of smartphone, for instance iPhone, Application Store(also known as AppStore) utilized as a common gateway for sharing software and contents, brings a big interest for many users and developers. However, prior research to understand users' behavior on AppStore has been a scant. Therefore, the main purpose of this study is to investigate the impact of key smart service environmental factors on AppStore in order to empirically explain users' psychological feelings of intention to use AppStore. Based on a well-known technology adoption model, TAM, the study incorporates three main characteristics(user, society, and service) with six constructs(Innovation, Enjoyment, Subjective Norm, Information Level, Content variety, and Cost), influencing perceived usefulness, which then affects users' intention to use AppStore. Results provide evidence that support the tested hypotheses. The implications of the findings suggest a new theoretical work for future AppStore research and offers suggestions that the researchers and practitioners of AppStore should consider regarding the development of application and contents.

• 한국안전학회지
• /
• 제32권4호
• /
• pp.79-88
• /
• 2017

The purpose of this study is to analyze the effects of personal, job, and health care characteristics of firefighters on musculoskeletal disorders (MSDs) and job stress. This survey was participated 591 firefighters in jeonnam and Busan city. The survey consisted of 1) personal, job, and health care characteristics measurement, 2) job stress measurement (KOSS, Korean Occupational Stress Scale), 3) musculoskeletal disorders symptoms mesurement. The analysis of the data was using SAS 9.1 Ver. The statistics analysis was performed the frequency, percentage, average, and standard deviation for each survey item. The Chi square analysis was performed to analyzed the effects of personal, job, and health care characteristics on MSDs and job stress. According to the results of the study on musculoskeletal disorders symptoms, 49.6% of the subjects perceived pain related to musculoskeletal diseases. The total score for job stress was 51.6 (SD 12.9), which was the highest 50% when compared to the Korean job stress standard (male). Age, department, work experience, working type, position, and sleeping time were found to affect musculoskeletal disorders and job stress.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.202-205
• /
• 2005

The purpose of this work is to identify the characteristic of eye movement for visual training of the elderly. This investigation is to examine the relationship between the head and the eye motor system for the localization of visual target direction in three-dimensional space. All experiments were performed in a soundproof chamber. Twenty-one red LEDs (Light-Emitting Diode, Brightness: 20cd/$m^2$) arrayed in three lines on a half circle-surrounding panel are used. LEDs are horizontally 30 degree apart and vertically 20 degree apart from each other. The condition of stimulation is random and anti-saccade. Physiological parameter such as EOG (Electro-Oculography) was measured by BIOPAC system. We measure the mean latency time, which is the time from the start of visual stimulation to the response of the human body. The result shows that the mean latency time is short in the case of the condition of anti-saccade, the fixed head and a quarter visual stimulation. This finding can be used in developing programs for various visual improvements for the elderly by analyzing the characteristic of eye movement.

• The Journal of the Acoustical Society of Korea
• /
• 제25권2E호
• /
• pp.79-84
• /
• 2006

Acoustic characteristics of a sound absorbing material can be identified, if the characteristic impedance and propagation constants are known, which have generally been determined experimentally. One easy method determining these two essential parameters is to measure the one dimensional wave characteristics in the impedance tube. In th udy, the effects of backing conditions on the impedance tube measurement have been examined using several pairs of generally used end conditions. The results showed that the measured values are similar for most pairs of end conditions: however, it was observed that the measured characteristic impedance for different thickness did not agree well for some pairs. In this work, the multi termination method, using three or more known backing con ns, was suggested to reduce such random errors, which are mostly caused by the test procedure. Employing three terminations as a set, comprised of a rigid end, an end with porous material, and an end with a backing cavity, it was demonstrated that improved measured results could be obtained for an open cell PU foam varying widely with three different thicknesses.

• Journal of information and communication convergence engineering
• /
• 제16권1호
• /
• pp.12-16
• /
• 2018

In this work, a voltage controlled oscillator (VCO) monolithic microwave integrated circuit (MMIC) was demonstrated for 10-GHz band motion detecting sensors. The VCO MMIC was fabricated using a $2-{\mu}m$ InGap/GaAs HBT process, and the tuning of the oscillation frequency is achieved by changing the internal capacitance in the HBT, instead of using extra varactor diodes. The implemented VCO MMIC has a micro size of $500{\mu}m{\times}500{\mu}m$, and demonstrates the value of inserting the VCO into a single chip transceiver. The experimental results showed that the frequency tuning characteristic was above 30 MHz, with the excellent output flatness characteristic of ${\pm}0.2dBm$ over the tuning bandwidth. And, the VCO MMIC exhibited a phase noise characteristic of -92.64 dBc/Hz and -118.28 dBc/Hz at the 100 kHz and 1 MHz offset frequencies from the carrier, respectively. The measured values were consistent with the design values, and exhibited good performance.