• Journal of the Korean Wood Science and Technology
• /
• v.50 no.4
• /
• pp.246-255
• /
• 2022

The need for non-destructive testing and evaluation of Korean traditional wooden buildings is increasing because of their widespread deterioration. Among all types of deterioration, termite damage in wooden columns is the most difficult to detect with the naked eye because it starts inside the wood, and the initial deterioration is small. X-ray computed tomography (CT) is the best technology to investigate the inner state of wood that has less damage, but applying it to wooden columns between walls is challenging. Therefore, the feasibility of tomosynthesis, which is a method to reconstruct a coronal section of a subject with a few X-ray projections from a limited angle of rotation, was studied as an alternative to CT. Pine (P. densiflora) with three artificial holes was prepared as a specimen to evaluate the quality of reconstructed tomosynthesis images according to the different number of projections. The quality of the tomosynthesis images in the in-focus plane was evaluated using the contrast-to-noise ratios, while a vertical resolution between the images was assessed by determining the artificial spread function. The quality of the tomosynthesis image in the in-focus plane increased as the number of projections increased and then remained constant as the number of projections reached 21 or over. In the case of vertical resolution, there was no significant difference when 21 projections or more were used to reconstruct the images. A distinct difference between coronal section images was found when the distance was more than 10 mm from one plane to another plane.

• Journal of the Korean Institute of Rural Architecture
• /
• v.24 no.2
• /
• pp.21-28
• /
• 2022

Focusing on the creation of a new han ok, especially a mid-rise hybrid-structured Han-ok, this study proposes a middle-rise (four-story) Han-ok on one and two lots located in Seoun-dong, the existing Han-ok intensive housing site in downtown Cheongju. 1) In terms of layout and function, according to the existing L-shaped Han-ok corresponding to the road and the direction, the parking lots and shops on the 1st floor, the business facility on the 2nd floor, the Han-ok on the 3rd and 4th floors are placed. There are yards, open roof yards, and semi-open Daecheong(大廳, main hall), which can be shared by residents. 2) In terms of structure and form, one or two floors (some 3 floors) are 5.4m square and 5.4×6.6m modules of the RC(Reinforced Concrete) group, and the upper floor reflects the 2.7m module, size and shape of the existing Han-ok. By extending the outer wall of the RC group in the lower floors (1st to 3rd floors) to the wooden exterior of the upper floors (2nd to 4th floors), it is attempted to avoid the awkward appearance of the RC group being exposed to wooden structures. And it is also attempted to reflect the wooden shape and design elements through the elevation elements such as horizontal windows, corner windows, picture frames, and vertical slits. 3) In environmental control and facilities, it is attempted to smooth the ventilation of the building by forming a vertical upward airflow from the dark space of the low floor to the positive of the upper floor. This doubles the effect through a vertical rise of cold air generated in a narrow alleyway, piloti parking lot, and the various voids. In addition to the Daecheong and Numaru(loft) of Han ok, the rooftop yard, the terrace, and the balcony, horizontal natural ventilation is generated through divided doors and transom windows.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.5
• /
• pp.405-422
• /
• 2024

This study investigated the resistance of domestic wood species used as wood members in general wood construction and Korean wood cultural properties to the termite Reticulitermes speratus using no-choice and two-choice tests. The results of the no-choice experiment confirmed that hardwood has higher termite resistance than that of softwood. In addition, R. speratus prefers softwood, including Abies holophylla, which has low density, is easy to feed on, and does not contain repellent extracts. In a two-choice test, Zelkova serrata was found to be the most termite-resistant wood species used in wooden cultural buildings. In addition, we investigated the effects of different wood extraction methods and their components on termite resistance. The cold-water extraction of softwood increased the feeding activity of termites; however, the cold-water extraction of hardwood had little effect on the feeding activity of termites. In natural environments with repeated exposure to moisture, such as rainfall, water-soluble extracts present in wood species are relatively more likely to dissolve and removed, making softwood more likely to be damaged by termites than hardwood. Untreated Quercus variabilis showed an extremely weak feeding activity of termites compared with that in other wood species; however, feeding termites with the alcohol-benzene extract of Q. variabilis had no inhibitory effect on their feeding activity. Therefore, we believe that the high density of Oriental cork oak wood inhibits the feeding activity of R. speratus. In contrast, the alcohol-benzene extracts of Z. serrata, Prunus sargentii, and Castanea crenata showed a strong inhibition of the feeding activity of termites.

• KIEAE Journal
• /
• v.17 no.3
• /
• pp.133-140
• /
• 2017

Purpose: The construction of New Han-ok style public buildings is a construction that can not be seen in traditional Han-ok, and it is a construction that combines traditional wooden structure, RC structure, and steel structure. Therefore, construction different from general construction is complicated and complex. It is necessary to accurately understand the construction method of each field rather than the general construction management method and study the method suitable for New Han-ok style public buildings. Also, since the New Han-ok style public building business is the first business to be introduced in Korea, new process management is needed rather than general process management. Method: The research method is as follows. Analyze process management through theoretical considerations and analyze the differences from general construction projects. Next, we want to identify the characteristics and problems of the process control method applied to real cases. Finally, the results of this analysis suggest ways to improve process management. Result: Therefore, it is necessary to establish a precise plan from the basic design to the construction of the public building construction management. In addition, careful planning should be made so that the supply and demand of materials and the supply and demand of personnel can be achieved smoothly.

• Journal of architectural history
• /
• v.29 no.2
• /
• pp.39-52
• /
• 2020

Seonjeong-jeon, the semi-great hall in Changdeok Palace, was constructed in a highly formal and conservative style and accommodated official ceremonies. However, the contemporary modification of the building has distorted or eliminated features including the two side doors on the front, the floor coverings, and the throne base (Jwa-tap) that consisted the most significant part of the throne. Seonjeong-jeon originally had three doors that stood between each pair of columns on the front side, respectively. The courtiers accessed the building through the side doors, while the central door was exclusively designated for the king. However, the renovation in 1999 ignored the political context of the architectural form of the building and changed the side doors into windows, damaging the traditional structure inherited from the early Joseon Dynasty. Although the building currently has traditional wooden floor structure (Woomul-maru), it was originally covered with square brick tiles (Bang-jeon) before the Japanese occupation, following the customs of early Joseon Dynasty. The throne was placed to the north of the central door and consisted of the throne base and a decorative roof (Dang-ga). A canvas (Jang-ja), which featured the royal symbolic painting of Sun, Moon, and Five Peaks, was also installed between the two columns that connected the base and the roof. Nevertheless, only the columns and the blank canvas remain nowadays after the removal of the base.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.1
• /
• pp.1-11
• /
• 2008

The purpose of this study is to examine the species of wooden members used in the Youngsanjeon Hall of the Sucknamsa temple in Anseong, Korea. Ninety-five wood samples from pillars, head-penetrating ties, beams, corner rafter, rafter, floor board and other wood members were identified. Seven species identified were hard pine, exotic pine, Zelkova serrata, Ginkgo biloba, Diospyros, Quercus(Cerrus) and Pyrus spp. In the case of pillars, eight were hard pines and the others Zelkova and Pyrus. Species of angle rafter were Ginkgo biloba and Zelkova. and those of beams were one hard pine and one Zelkova. Two purlin samples were Quercus(Cerrus) and rafters were hard pines except one Ginkgo and one exotic pine. Roof-filling timbers were identified as Zelkova and Diospyros spp. The other samples of roof-filling timbers were all identified as hard pines. The use of Ginkgo and several hardwoods in addition to hard pines may indicate supply of local logs near the Sucknamsa temple.

• Structural Engineering and Mechanics
• /
• v.40 no.4
• /
• pp.453-469
• /
• 2011

A one-story, wooden-frame, intermediate-bay model with Dou-Gon designed according to the Building Standards of the Song Dynasty (A.D.960-1279), was tested on a unidirectional shaking table. The main objectives of this experimental study were to investigate the seismic performance of Chinese historic wooden structure under various base input intensities. El Centro wave (N-S), Taft wave and Lanzhou wave were selected as input excitations. 27 seismic geophones were instrumented to measure the real-time displacement, velocity and acceleration respectively. Dynamic characteristics, failure mode and hysteretic energy dissipation performance of the model are analyzed. Test results indicate that the nature period and damping ratio of the model increase with the increasing magnitude of earthquake excitation. The nature period of the model is within 0.5~0.6 s, the damping ratio is 3~4%. The maximum acceleration dynamic magnification factor is less than 1 and decreases as the input seismic power increases. The frictional slippage of Dou-Gon layers (corbel brackets) between beams and plates dissipates a certain amount of seismic energy, and so does the slippage between posts and plinths. The mortise-tenon joint of the timber frame dissipates most of the seismic energy. Therefore, it plays a significant part in shock absorption and isolation.

• Journal of architectural history
• /
• v.17 no.3
• /
• pp.61-80
• /
• 2008

The purpose of this study is to discover the characteristics and the change of the framed structure with triple beam. 61 existing buildings with the triple beam structure were selected and analyzed extensively. The result of this study could be described in detail like below. The triple beam structure is used in the highly graded and symbolized building like the Buddhist sanctum and the Confucian sanctum. And the triple beam structure was chiefly used in $1600{\sim}1800's$. Generally, 1 Koju-type with Toikan(退間) is applied to the triple beam structure. Despite of the sameness of framed structure, there is a tendency that the rear Toikan(後退間) is used in the Buddhist sanctum and the front Toikan(前退間) is used in the Confucian sanctum. This different application of the Toikan(退間) resulted from the different spatial characteristics which reflect function and grade of the building. The application of Sangjungdori(上中道里, upper purlin) and two Danyeon(短椽, short rafter) is a necessary consequence, because Jungbo(중보, middle beam) is located between Daebo(대보, beam) and Jongbo(종보, small and high located beam) as an additional member of frame. And these are essential characteristics of the framed structure with triple beam. The triple beam structure is formed in a transitional period, as the result from eliminating the inner high-column from the 2 Koju and double beam structure. Though the Daebo is longer, the structure is more stable. But the rate of application of the triple beam structure is low, because it does not exceed the double beam structure in merits. Some of buildings with the triple beam structure has the asymmetrical characteristic in design, which is appeared in the latter period of Joseon Dynasty.

• KIEAE Journal
• /
• v.8 no.5
• /
• pp.3-10
• /
• 2008

The Korean traditional architecture has developed by adapting to the natural environment, and has successfully created a comfortable indoor settings by using the surrounding natural resources. This is reflected in the building layout, space design and even materials. Our traditional wooden windows adjusting ambient temperature and humidity have both the functions of window and door, although they are clearly divided in the West. The opening and closing method of our traditional windows is similar and their dimensions are shown not to be standardized but diverse in terms of the characteristic of wooden furniture and that of components placed between columns. Thus this study aims to research the sound insulation and absorption performance of traditional windows to be varied with thickness, finishing method of window paper and thickness of air layer. Despite increase of the thickness of window paper, sound absorption was reduced, and the same result was shown when both sides of the structure were finished with thick window paper. The sound insulation performance of the windows could be evaluated to be inappropriate with $R_w$ 0 ~ $R_w$ 14.

• Journal of architectural history
• /
• v.14 no.3 s.43
• /
• pp.77-88
• /
• 2005

This study is to find out the characteristics of the changes of the site layout in Beopjusa which was built on Maitreya faith in the Shilla.. According to the analysis of it in this study, we make conclusions as follows; 1) The reconstruction of Beopjusa means a start in Dhamalsama(法相宗) and then it was supposed to be Buddhist temple which was formed by intersecting axis of centering around a wooden pagoda(捌相殿) with a main Buddhist hall and a lecture hall. 2) After the middle of Koryo dynasty, Beopjusa was changed to building layout of intersecting with Yongwabojeon(龍華寶殿) and Daeungbojeon(大雄寶殿) because of harmony with Avatamsaka(華嚴宗) and Dhamalsama centering around Avatamsaka. 3) The buildings of Zen Buddhism was built in the early Chosun dynasty owing to a prevalence of Zen Buddhism in the late Koryo dynasty. And since 17th century, Buddhist halls were each built in their a faith system according to interpenetrated Buddhism(通佛敎). 4) The courtyard type of mountainous district was made on interpenetrated Buddhism. On the other hand, the site layout of Beopjusa is being maintained by centripetal spatial organization through the wooden pagoda as object.