• Journal of the Korean institute of surface engineering
• /
• v.53 no.6
• /
• pp.285-292
• /
• 2020

Ancient cultural heritage made up of wood and organic fibers have been easily disintegrated or decomposed by various microorganisms like bacteria and fungi. Here, we demonstrate the effectiveness of an atmospheric pressure plasma jet (APPJ) system to sterilize the microorganisms in tangible cultural heritage. We collected several specimens from the surface of ancient documents and wooden artifacts. Finally, two bacteria and two fungi were prepared and sterilized using the APPJ treatment. The APPJ system is beneficial to its simple apparatus, quick operation time, and cost-effectiveness. Bacteria were almost sterilized within only 1 min treatment using 15 % O2 and applied bias voltage of 100 V. In case of the fungi, sterilization rate reached over 83 % but difficult to reach over 90 % even 10 min treatment. According to the plasma diagnostics using optical emission spectroscopy, it was found that the reactive oxygen species such as OH groups are critical for sterilization of microorganisms. Although further efforts should be performed, we believe that efficient sterilization could be realized by the simple, quick, and portable APPJ treatment system.

• Journal of Conservation Science
• /
• v.31 no.4
• /
• pp.341-350
• /
• 2015

The preservation has been conducted for wooden ship timber excavated from Bonghwang-Dong, Gimhae, Korea. The species were analyzed for conservation as pre-treatment. Outer panel was analyzed as Cinnamomum spp. and trapezoid wooden material, wooden wedge was Cryptomeria japonica D. Don.. Wooden ship timber have been treated by vacuum-freeze drying after impregnation with aqueous PEG#3,350 solution(almost 45%). The timber of Bonghwang-Dong ship is considered as Japanese ship that many data such as conformation of ship, location of site, japanese artifact of around site were confirmed. In addition, The ship timber give us the important information about the international trade with Japan.

• Journal of Conservation Science
• /
• v.7 no.2
• /
• pp.45-53
• /
• 1998

The Kong-Chung Jung's relics made of wooden materials were pre-examined for conservation. Kong-Chung Jung was a General of the Chosun Dynasty and his weapons were made of wood. The pre-examining method was focused on the quality and species of the wooden weapons. X-ray radiation was used for the observation of wood structure, and the condition of the relics was relatively good although they contained some cracks. The examination of species using optical microscope showed that the species of each relics were Pinus densiflora of hanging scroll pole, Lozoste lancifolia of a top of flagnole, Fraxinus sp. of a flagpole, Phyllostachys sp. of arrow shafts. For the conservation of the relics, celyl alcohol as dimensional stability chemicals was used and poly(vinyl acetate) and epoxy adhesives were also used for the joining and restoring of the relics.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.4
• /
• pp.222-251
• /
• 2017

This paper analyzes the characteristics of the ancient tombs discovered in the Gyeongju site and discusses the direction of the excavation. There are six special features of the wooden chamber tomb covered with stone in Gyeongju. First, confirmation of the above-ground type and the underground type burial mound. Second, confirmation of the construction such as the partition of mound and the pile of stone structure. Third, confirmation of the frontal part structure of the protect stone such as pebble-stone layer, boundary stone. Fourth, confirmation of the relationship before and after the mound. Fifth, the circumference and boundary of the confirmed(before 1990s) burial mounds were discovered, resolving the uncertainty. Sixth confirmation of the crowd unit tombs. By summing up these six features, it is possible to clearly divide the individual units and the crowd units of the Silla tombs. Confirmation of individual units and crowd units can clarify the size and scope of the tombs located by the concatenation and overlap. It is possible to get a glimpse of the formation process through the interrelationships between the two sides. The tombs are located in the upper-and-lower layer structure of the tombs and show selective site selection. When this formative process is rearranged, it is understood that the Gyeongju Silla Cemetery is formed through the course of four stages. It is anticipated that it will be possible to make selective projects in the excavation survey based on the confirmation of the individual unit and the crowd unit of the Silla ancient tombs and the formation process.

• Wind and Structures
• /
• v.17 no.6
• /
• pp.609-627
• /
• 2013

The Yingxian wooden tower in China is currently the tallest wooden tower in the world. It was built in 1056 AD and is 65.86 m high. Field measurements of wind speed and wind-induced response of this tower are conducted. The wind characteristics, including the average wind speed, wind direction, turbulence intensity, gust factor, turbulence integral length scale and velocity spectrum are investigated. The power spectral density and the root-mean-square wind-induced acceleration are analyzed. The structural modal parameters of this tower are identified with two different methods, including the Empirical Mode Decomposition (EMD) combined with the Random Decrement Technique (RDT) and Hilbert transform technique, and the stochastic subspace identification (SSI) method. Results show that strong wind is coming predominantly from the West-South of the tower which is in the same direction as the inclination of the structure. The Von Karman spectrum can describe the spectrum of wind speed well. Wind-induced torsional vibration obviously occurs in this tower. The natural frequencies identified by EMD, RDT and Hilbert Transform are close to those identified by SSI method, but there is obvious difference between the identified damping ratios for the first two modes.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.3
• /
• pp.11-18
• /
• 2019

The purpose of this study was to estimate the resistance capacity of a traditional wooden house with shear walls made of wood panel. In order to achieve the purpose of the study, the load - displacement test was carried out and the resistance moment values of the shear walls were proposed. The shear walls were made by placing studs with a nominal dimension of $38mm{\times}89mm$ at intervals of 600 mm, and attaching 12 mm thick plywood with 8-d size pegs at intervals of 150 mm. The type of traditional building wall was classified and showed the moment resistance ability of each wall type. This value is expressed as a proportional value divided by the moment resisting capacity of the standard size shear walls not divided into the divided small frames. Although some frames have proportional values larger than 1.0 even though they have openings, most of them show values smaller than 1.0. Also, even without the openings, it showed a smaller value than 1, such as 0.84 and 0.67.

• Korean Institute of Interior Design Journal
• /
• v.23 no.5
• /
• pp.96-103
• /
• 2014

This study investigated the windows and doors of Jecheon Park Dosu's House and Jecheon Jeong Wontae's House, designated as a Important Folklore Cultural Heritage in Jecheon. It aimed to contribute to the study of traditional house, and to the conservation policy of architectural Heritage in Jecheon. This study used the research methods of the literature analysis and the field survey, and it was to analyze the spatial characteristics of the windows and doors in each building. The result are as followings. Firstly, the wooden board door(板張門) of a hinged door type is found in the kitchen of An-chae, and the Bongchang(封窓) and Gwangchang(光窓) towards the courtyard is installed for ventilation and lighting. Secondly, the slender-ribbed windows and doors(細箭 窓戶) of double swinging type towards the courtyard is installed in An-bang, and Merum(遠音) is found. Thirdly, the framed panel door(骨板門) of a hinged door type towards the backyard is found in Daechung(大廳). Lastly, the slender-ribbed windows and doors of double swinging type towards the outside is found in Sarang-bang of Sarang-chae, and Merum(遠音) is installed. Especially, double skin windows and doors is installed in Jecheon Park Dosu's House.

• The Journal of the Korea Contents Association
• /
• v.19 no.9
• /
• pp.112-121
• /
• 2019

Title of management of cultural asset architectures made of wood managed by nation or local government is separated and there is a high concern about the disappearance of many national cultural asset architectures by fire. This study investigated the effectiveness of major installed appliances in terms of disaster prevention, and problems by early suppression in the event of fire and by mobilization of fire engines in depth. Also, this study derived problems by conducting an in-depth individual interview on interested parties for installation of fire extinguishing system by related law and to improve system to make realistic maintenance. As a result, it was identified that they have reached the positive aspects of protecting cultural asset architectures from disaster as fire by maintaining and managing facilities by establishing proper disaster prevention measures because they are surrounded by mountain or buildings are contiguous. Wooden cultural asset architectures are often excluded from regulation for installation of fire-fighting facilities under the Fire Services Act because most of wooden cultural assets are detached buildings, occupy small area, and are one-storied architecture. The best method is having extinguishing ability themselves according to the manual by making fire manual as management policy before the outbreak of fire. This study intends to suggest a follow-up study for practical considerations to establish or designate a professional management agency for them to protect important national cultural heritage buildings at the state level before they are destroyed by fire.

• 보존과학연구
• /
• s.16
• /
• pp.1-17
• /
• 1995

We conserved efficiently artifacts such as Pole(Treasure No. 930)and Helmet(General of Lee, Wan:1602∼1674) which are housed in the historical department, Kyonggi-do provincial office. It were carrying out physical and chemical methods for removing corrosion products at the same time. During the treatment, the spear was proved to coat gold amalgam on the surface and the pole restored its original state as a result using X-ray fluorescence analysis and Radiography, in addition, we could find their skill and technology by examining the section painted lacquer with wooden by microscopy.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.2
• /
• pp.122-130
• /
• 2013

One of recent methods to protect wooden cultural assets from fire, there is the flame retardation which is applied directly to wood and it is to prevent fire through securing flame resistance for the material and delaying combustion when failed fire in advance and then to gain time for people in the room to evacuate and it has same goal with the Korean Fire Service Act by protecting life and property. However, in case of spraying flame retardant on the colored surface of the wooden cultural assets, there are continuous problems of decoloration, efflorescence and water absorbtion after sometime and accordingly there increases danger of damages of cultural assets. So when treating with flame retardant on wooden cultural assets, there has to be no problems on dancheong after sometime and securing sustainable methods for flmae retardation should be preceded. Accordingly, this study aims to provide basic sources for selecting proper flame retardation methods by evaluating and analyzing flame retardation capabilities according to types of flame retardants which are frequently used nowadays and spraying them on the dancheong-painted surface and confirming if there is no problem on the dancheong and wood after sometime and if flame retardation effect is sustainable with its quality and capability through precise analysis.