• Journal of the Korean Solar Energy Society
• /
• v.28 no.3
• /
• pp.35-44
• /
• 2008

In this study, the experiment of the measuring of four different types of flooring materials' thermal characteristics was conducted and examined during the summer. The experimental materials were arranged on the existing slab of the roof, and then its thermal characteristics were examined from the point of view of thermal radiation analysis. The aim of this study is ultimately to draw the fundamental data for improvements in a building's thermal function and reduce the urban heat island phenomena through optimizing the thermal characteristics of the surface covering materials of a building. The results from this study are as follows; 1) Each experimental material's albedo was calculated as 0.83 on the aluminum panel, 0.40 on the rock block, 0.37 on the wood deck and 0.21 on the concrete. It shows that the concrete material, which has the lowest short wave reflective rate, absorbed the most radiation energy and the aluminium panel has absorbed the lowest radiation energy. 2) From the each experimental object's value of the long wave radiation, the concrete material measured the highest, at $628W/m^2$, and the aluminium panel measured the lowest at $412W/m^2$. Therefore, it verifies that the experimental objects' own radiation rate determines the amount of the long wave radiation. 3) The degree of energy absorbency of a building's surface covering materials is greatly influenced by its own albedo and radiation rate, Therefore, it needs to be considered for the improvements in a building's thermal function and reducing the urban heat island phenomena. 4) According to the evaluation result of the each experimental object's overall heat transmission screening function on the roof of a building, the wooden deck is proven to be an excellent material for excluding the outside temperature differences effectively with its characteristic of low heat capacity and conduction. Also its surface temperature on the roof slab and the temperature difference during the day were both measured at low.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.661-670
• /
• 2017

50-year tree-ring ${\delta}^{18}O$ chronologies (1966~2015) for principle conifer tree species (Taxus cuspidata, Pinus koraiensis, Abies koreana) and Quercus mongolica at subalpine zone in Mt. Jiri were established. The establishing of tree-ring ${\delta}^{18}O$ chronologies for each tree species were fulfilled using four trees, which showed the good result in cross-dating. In the comparisons between tree-ring ${\delta}^{18}O$ chronologies within the same tree species all tree species showed reliable results statistically (p < 0.001), and they also showed EPS higher than 0.85. In addition to, the reliable correlations (p < 0.001) were verified between tree-ring ${\delta}^{18}O$ chronologies of four tree species, as well. In the response function analysis in order to investigate the relationships between tree-ring ${\delta}^{18}O$ chronologies and corresponding climatic factors, i.e., monthly precipitation and mean temperature, T. cuspidata showed a negative correlation with May precipitation (p < 0.05) and A. koreana showed a negative correlation with April precipitation (p < 0.05). If long tree-ring ${\delta}^{18}O$ chronologies of T. cuspidata and A. koreana will be established, it will be possible to reconstruct April and May precipitation in the past when we have no the meteorological data.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.6
• /
• pp.1119-1127
• /
• 2009

In PGA golf, total prize money and average score are good response variable related to golf skills such as driving distance, green in regulation and putts per green in regulation. But it's not easy to predict the winner of coming tournament. Thus I applied Neural Networks which has pretty good advantages for non-linear complex modeling to binary data. In neural network architectures, I applied NRBF and MLP architecture model for binary data which represent who had a win or not.

• Journal of Industrial Technology
• /
• v.22 no.B
• /
• pp.35-44
• /
• 2002

To find the optimal solution as rapidly and exactly as possible with Nelder-Mead simplex algorithm, the present values of the reflection, expansion, contraction and/or shrink parameters of this algorithm are needed to be changed at appropriate time during the search process. The reflection parameter is selected in this study in order to be changed because reflection, expansion and contraction process can be simultaneously effected by only this parameter. Two independent indices for determining whether the present value of the reflection parameter of this algorithm should be changed or not during the search process are suggested in this study. Those indices were made of the equations of Nelder-Mead simplex algorithm's convergence criterion and Dennis-Wood's convergence criterion, respectively. It is appeared that the optimal solution can be find with smaller numbers of objective function evaluation than the original Nelder-Mead's one with fixed parameter when the those indices are used during the search process. and the more remarkable reduction effect of the number of an objective function evaluation can be obtained when the latter index is used.

• International Journal of Reliability and Applications
• /
• v.6 no.2
• /
• pp.79-85
• /
• 2005

We show how comparative mean residual life functions (MRL) can be used to give unique insights into strengths of materials data. Recall that Weibull's original reliability function was developed studying and fitting strengths for various materials. This creative comparing of MRL functions approach can be used for regular life data or any time to response data. We apply graphical MRL's to real data from tests of tensile strength of high quality engineered wood.

• Journal of Nutrition and Health
• /
• v.36 no.1
• /
• pp.9-17
• /
• 2003

The preparation method of a soluble dietary fiber from oak wood (Quercus mongolica) and the effect of the soluble dietary fiber on physiological function in rat fed high cholesterol diets was investigated. The best condition for steam explosion method was 25 kgf/㎤ pressure for 6 min. The exploded samples were delignified by the filtration treatment with 1% NaOH for several times, which is the best condition. The enzymatic hydrolysis of Cellusoft cellulase was more effective than Onozuka R-10 cellulase. The manufactured soluble dietary fiber was assayed using gel permeation chromatography (GPC) and it was dissolved in water. Average molecular weight distribution of manufactured soluble dietary fiber was about 348-1,200 and it was assumed the oligomer form fraction. In order to compare the manufactured soluble dietary fiber with commercial soluble dietary fiber (pectin) on the physiological function, Sprague-Dawley male rats weighing 100$\pm$10 g were randomly assigned to one normal diet and five high cholesterol diet containing 1% cholesterol. The high cholesterol diet groups were classified to fiber free diet (FF group), 5% pectin (5P group), 10% pectin (l0P group), 5% manufactured soluble dietary fiber (5M group) and 10% manufactured soluble dietary fiber (10M group). Body weight gains in all soluble dietary fiber groups were lower than FF group. Food intakes were increased in all soluble dietary fiber groups than that of FF group. Food efficiency ratio (FER) was significantly decreased in all soluble dietary fiber groups than that of the FF group, and it was especially was highest in 10% supplemented soluble dietary fiber group. The weight of liver of the soluble dietary fiber supplemented groups were lower than those of the FF group, but weights of cecum and small intestine of all supplemented soluble dietary fiber groups were significantly increased, compared with that of FF group. The weights and water contents in feces were significantly increased by the soluble dietary fiber. The activity of the glutamic oxaloacetic transaminase in soluble dietary fiber groups were significantly decreased than those of FF group. The hepatic glutathione S-transferase activity in all soluble dietary fiber supplemented groups were higher than that of FF group. The physiological effects of the manufactured soluble dietary fiber are the same as the commercial soluble dietary fiber (pectin). The preparation method of the soluble dietary fiber from the oak chips suited to its purpose. (Korean J Nutrition 36(1) : 9~17, 2003)

• Applied Chemistry for Engineering
• /
• v.30 no.6
• /
• pp.712-718
• /
• 2019

A combustible producer gas composed of H₂, CO and CH₄ could be obtained by the thermal-chemical conversion of biomass. However, a large amount of particulate matters including tar generated causes the mal-function of turbines and engines or the fouling of pipelines. In this study, a wet scrubber using the soybean oil and bag filter were installed, and the removal efficiency was investigated. Hydrate limestone and wood char base activated carbon were pre-coated on the filter medium to prevent clogging of open pores. The removal efficiencies by the bag filter were 86 and 80% for the hydrated limestone and activated carbon coating, respectively. Overall, the collection when using a series of oil scrubbers and bag filters were 88%, while 83% for the filter coating material.

• Journal of Korean Society of Forest Science
• /
• v.90 no.1
• /
• pp.1-9
• /
• 2001

The objectives of this study were to explain market structures of logs imported to Korea from U.S.A., New Zealand. Chile. The demand for imported logs is modeled as a function of output of wood manufacturing in Korea and log prices of competing suppliers. It is hypothesized that the quantity of log impaled in a period is determined by its own and competing prices and the output of wood corresponding manufacturing sector in the current period. Import demand functions of logs imported to Korea from U.S.A., New Zealand and Chile were estimated by SURE(Seemingly Unrelated Regression Equations). Elasticities of amounts of logs imported to Korea from U.S.A., New Zealand and Chile with respect to price of imported log from U.S.A. were -2.88, 1.36 and 3.17, respectively. Elasticities of amounts of logs imported to Korea from U.S.A., New Zealand and Chile with respect to price of imported log from New Zealand were 0.71, -1.65 and 1.44, respectively, Elasticities of amounts of logs imported to Korea from U.S.A., New Zealand and Chile with respect to price of imported log from Chile was -2.88. 1.36 and 3.17.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.350-359
• /
• 2016

We performed fast pyrolysis of empty fruit bunch (EFB) in the range of temperature from $400{\sim}550^{\circ}C$ and 1.3 s of residence time. The effect of temperature on the yields and physicochemical properties of pyrolytic products were also studied. Elemental and component analysis of EFB showed that the large amount of potassium (ca. 8400 ppm) presents in the feedstock. Thermogravimetric analysis suggested that the potassium in the feedstock catalyzed degradation of cellulose. The yield of bio-oil increased with increasing temperature in the range of temperature from $400{\sim}500^{\circ}C$, while that of gas and biochar decreased and showed monotonous change each with increasing temperature. When the EFB was pyrolyzed at $550^{\circ}C$, the yield of bio-oil and char decreased while that of gas increased. Water content of the bio-oils obtained at different temperatures was 20~30% and their total acid number were less than 100 mg KOH/g oil. Viscosity of the bio-oils was 11 cSt (centistoke), and heating value varied from 15 to 17 MJ/kg. Using GC/MS analysis, 27 chemical compounds which were classified into two groups (cellulose-derived and lignin-derived) were identified. Remarkably the concentration of phenol was approximately 25% based on entire chemical compounds.

• Environmental and Resource Economics Review
• /
• v.19 no.3
• /
• pp.597-632
• /
• 2010

There is general agreement that global warming is occurring and that the main contributor to this probably is the buildup of green house gasses, GHG, in the atmosphere. Two main contributors are the utilization of fossil fuels and the deforestation of many regions of the world. The burning of fossil fuels increases atmospheric carbon while the burning of fuel-wood reducing fossil fuel consumption along with its forest source maintain an atmospheric carbon level. The standing timber in the forests is a carbon sink, as are wood buildings and structures, and fossil fuel in the ground. This paper is designed to examine a number of current issues related to mitigating the global warming problem through forestry. For this purpose, we develop a modeling approach by integrating timber market, fossil fuel market and carbon cycling model. We use discrete time optimal control theory to identify optimal time paths, the laws of motion, and stationary stats solutions of endogenous variables in the model. On the basis of these results, we identify the optimal amounts of subsidies to be provided or taxes to be imposed by the regulatory agency to mitigate atmospheric carbon accumulation. We also present a numerical example to help illustrate the characteristics of variables in the model when the social cost for atmospheric carbon incrementally shifts upward. A surprising result is that the social cost function for atmospheric carbon has a very smaller impact on the optimal rotation period than previous literature suggested.