• 제목/요약/키워드: Wireless receiver

검색결과 867건 처리시간 0.027초

Performance of Energy Detection Spectrum Sensing with Delay Diversity for Cognitive Radio System

  • Kim, Eun-Cheol;Koo, Sung-Wan;Kim, Jin-Young
    • Journal of electromagnetic engineering and science
    • /
    • 제9권4호
    • /
    • pp.194-201
    • /
    • 2009
  • In this paper, a new spectrum sensing method based on energy detection is proposed and analyzed in a cognitive radio(CR) system. We employ a delay diversity receiver for sensing the primary user's spectrum with reasonable cost and complexity. Conventional CR with the receiver equipping multiple antennas requires additional hardware and space for installing multiple antennas in accordance with increase in the number of antennas. If the number of antennas increases, detection probability as well as hardware complexity and cost rise. Then, it is difficult to make a primary user detector practically. Therefore, we adopt a delay diversity receiver for solving problems of the conventional spectrum detector utilizing multiple antennas. We derive analytical expressions for the spectrum sensing performance of the proposed system. From the simulation results, it is demonstrated that the primary user detector with the delay diversity receiver has almost half the complexity and shows similar or improved performance as compared with that employing multiple antennas. Therefore, the proposed spectrum sensing structure can be a practical solution for enhancing the detection capacity in CR system operations. The results of this paper can be applied to legacy CR systems with simple modifications.

A New Soft-Fusion Approach for Multiple-Receiver Wireless Communication Systems

  • Aziz, Ashraf M.;Elbakly, Ahmed M.;Azeem, Mohamed H.A.;Hamid, Gamal A.
    • ETRI Journal
    • /
    • 제33권3호
    • /
    • pp.310-319
    • /
    • 2011
  • In this paper, a new soft-fusion approach for multiple-receiver wireless communication systems is proposed. In the proposed approach, each individual receiver provides the central receiver with a confidence level rather than a binary decision. The confidence levels associated with the local receiver are modeled by means of soft-membership functions. The proposed approach can be applied to wireless digital communication systems, such as amplitude shift keying, frequency shift keying, phase shift keying, multi-carrier code division multiple access, and multiple inputs multiple outputs sensor networks. The performance of the proposed approach is evaluated and compared to the performance of the optimal diversity, majority voting, optimal partial decision, and selection diversity in case of binary noncoherent frequency shift keying on a Rayleigh faded additive white Gaussian noise channel. It is shown that the proposed approach achieves considerable performance improvement over optimal partial decision, majority voting, and selection diversity. It is also shown that the proposed approach achieves a performance comparable to the optimal diversity scheme.

RAKE Receiver for Time Division Synchronous CDMA Mobile Terminal

  • Xiao Yang;Lee Kwang-Jae;Lee Moon-Ho
    • Journal of electromagnetic engineering and science
    • /
    • 제6권1호
    • /
    • pp.10-17
    • /
    • 2006
  • For the sake of the potential ability of overcoming interference in TD-SCDMA(time division-synchronous code division multiple access) systems, pilot signal is adopted, but the presented TD-SCDMA protocol has not considered the Rake technique for their mobile terminals. This paper developed a RAKE receiver algorithm and an implementation circuit, which make use of the pilot signal in the burst structure of the TD-SCDMA base station to estimate main channel parameter(channel delays) in the downlink of TD-SCDMA wireless network. The algorithm can reduce multipath interference for the mobile units in multiusers' case. Theoretic performance analysis presented in the paper and computer simulations show that there is a range of BER for Rake receiver and confirm that the proposed RAKE receiver algorithm achieved a better performance under multipath fading propagation and multiusers conditions.

Receiver-driven Cooperation-based Concurrent Multipath Transfer over Heterogeneous Wireless Networks

  • Cao, Yuanlong;Liu, Qinghua;Zuo, Yi;Huang, Minghe
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제9권7호
    • /
    • pp.2354-2370
    • /
    • 2015
  • The advantages of employing SCTP-based Concurrent Multipath Transfer (CMT) have been demonstrated to be very useful for data delivery over multi-homed wireless networks. However, there is still significant ongoing work addressing some remaining limitations and challenges. The most important concern when applying CMT to data delivery is related to handling packet reordering and buffer blocking. Another concern on this topic is that current sender-based CMT solutions seldom consider balancing the overhead and sharing the load between the sender and receiver. This paper proposes a novel Receiver-driven Cooperation-based Concurrent Multipath Transfer solution (CMT-Rev) with the following aims: (i) to balance overhead and share load between the sender and receiver, by moving some functions including congestion and flow control from the sender onto receiver; (ii) to mitigate the data reordering and buffer blocking problems, by using an adaptive receiver-cooperative path aggregation model, (iii) to adaptively transmit packets over multiple paths according to their receiver-inspired sending rate values, by employing a new receiver-aware data distribution scheduler. Simulation results show that CMT-Rev outperforms the existing CMT solutions in terms of data delivery performance.

A CMOS Impulse Radio Ultra-Wideband Receiver for Inner/Inter-chip Wireless Interconnection

  • Nguyen, Chi Nhan;Duong, Hoai Nghia;Dinh, Van Anh
    • 전기전자학회논문지
    • /
    • 제17권2호
    • /
    • pp.176-181
    • /
    • 2013
  • This paper presents a CMOS impulse radio ultra-wideband (IR-UWB) receiver implemented using IBM 0.13um CMOS technology for inner/inter-chip wireless interconnection. The IR-UWB receiver is based on the non-coherent architecture which removes the complexity of RF architecture (such as DLL or PLL) and reduces power consumption. The receiver consists of three blocks: a low noise amplifier (LNA) with active balun, a correlator, and a comparator. Simulation results show the die area of the IR-UWB receiver of 0.2mm2, a power gain (S21) of 12.5dB, a noise figure (NF) of 3.05dB, an input return loss (S11) of less than -16.5dB, a conversion gain of 18dB, a NFDSB of 22. The receiver exhibits a third order intercept point (IIP3) of -1.3dBm and consumes 22.9mW of power on the 1.4V power supply.

Design and Experiment Results of High-Speed Wireless Link Using Sub-terahertz Wave Generated by Photonics-Based Technology

  • Kim, Sungil;Ahn, Seung-Ho;Park, Seong Su
    • ETRI Journal
    • /
    • 제35권4호
    • /
    • pp.578-586
    • /
    • 2013
  • Using a sub-terahertz (sub-THz) wave generated using a photonics-based technology, a high-speed wireless link operating at up to 10 Gbps is designed and demonstrated for realization of seamless connectivity between wireless and wired networks. The sub-THz region is focused upon because of the possibility to obtain sufficient bandwidth without interference with the allocated RF bands. To verify the high-speed wireless link, such dynamic characteristics as the eye diagrams and bit error rate (BER) are measured at up to 10 Gbps for non-return-to-zero pseudorandom binary sequence $2^{31}-1$ data. From the measurement results, a receiver sensitivity of -23.5 dBm at $BER=10^{-12}$ is observed without any error corrections when the link distance between the transmitter and receiver is 3 m. Consequently, we hope that our design and experiment results will be helpful in implementing a high-speed wireless link using a sub-THz wave.

페이져 시스템을 이용한 무선 원격제어용 POCSAG 수신기 인터페이스회로 설계 (Design of POCSAG Receiver Interface Circuits for Wireless Remote Control using Pager System)

  • 이재민
    • 한국산업융합학회 논문집
    • /
    • 제4권3호
    • /
    • pp.289-294
    • /
    • 2001
  • In this paper a POCSAG receiver interface circuit for wireless remote control using pager system is presented. SM8212A and AT89C51 chips are used for the core of system design. The proposed system is able to communicate with computers through RS-232C interface, which enables users to manage the data from the pager system on computers in real time. Analysis of SM8212A for Ole algorithm of CPU control program is described. The hardware is implemented on a PCB and the control program is made by C++ and assembly language. The performance of designed system is confirmed by experiments using the TESCOM equipments.

  • PDF

Experimental Demonstration of 4×4 MIMO Wireless Visible Light Communication Using a Commercial CCD Image Sensor

  • Kim, Sung-Man;Jeon, Jong-Bae
    • Journal of information and communication convergence engineering
    • /
    • 제10권3호
    • /
    • pp.220-224
    • /
    • 2012
  • We report an experimental demonstration of $4{\times}4$ multiple-input multiple-output (MIMO) wireless visible light communications (VLC) using a charge-coupled device image sensor receiver instead of a photodiode receiver. An image sensor is a kind of digital camera, which is used in most mobile devices such as smart phones or laptop computers and a promising commercial candidate for a VLC receiver. The transmission distance of the experimental result is over 10 m, enough for most indoor communication applications. We expect that the MIMO VLC technique based on image sensor receivers can be widely used with the development of high-speed image sensors.

실시간 정밀 GPS/GNSS를 위한 위성항법 수신기 망 구성 요소 설계 및 구현 (Design and Implementation of Receiver Network Elements for Real-Time Precise GPS/GNSS)

  • 김희성;이형근
    • 제어로봇시스템학회논문지
    • /
    • 제16권2호
    • /
    • pp.126-133
    • /
    • 2010
  • Due to the deployment of various wireless networks originating from CDMA, GSM, and WLAN, it became very convenient to exchange information from one place to another. As compared with the traditional environments for one-way information distribution based on fixed radio frequency bands, the convenient wireless network environments will bring about many changes in positioning technologies based on global navigation satellites. Among the many changes to come, the reconfigurable receiver network is one of the most attractive concepts since it can be tailored to a specific application area among networked robots, formation flying, bridge monitoring, and traffic monitoring. As an initial study to develop a reconfigurable receiver network, this paper deals with the design and implementation of the key elements of the reconfigurable receiver netowork; server, broadcaster, and client. In the designed receiver network, a sever receives and decodes measurements from a reference receiver installed at a known location, a broadcaster processes and transfers the messages from servers to clients and manages connections with servers and clients, a client receives the messages from the broadcaster and performs differential positioning. A real-time experiment result is demonstrated to validate the functionalities of each network element.

유도방식 무선충전기용 송수신 장치간 정렬상태 검출기법 (The method of alignment detection between Tx and Rx set in wireless inductive charger)

  • 이상곤;김재명
    • 한국위성정보통신학회논문지
    • /
    • 제9권1호
    • /
    • pp.90-96
    • /
    • 2014
  • 본 논문은 무선충전기에 있어서 효율 증대 기법에 관한 것으로, 송수신 장치간 정렬상태를 수신 장치인 스마트폰에 표시할 수 있는 방법을 제시한다. 구현된 무선충전기는 세계 표준인 WPC( Wireless Power Consortium ) 방식을 기반으로 되어 있어 수 100kHz 이하의 주파수로 동작하고 누설 자속을 최소화할 수 있도록 자기장 차폐제를 사용한 송수신 코일 구조를 갖는다. 송수신 장치의 정렬 상태를 확인할 수 있는 종래 방식은 수신단 코일의 수신 레벨만을 표시하는 단순 방식이지만 본 방식은 수신 장치의 위치까지 알 수 있어 보다 진보된 방식이라 할 수 있다. 무선 충전기 송수신 장치의 정렬상태 검출을 위하여 수신 코일의 위치변화와 자기장 세기가 서로 선형관계에 있음을 확인하고 삼각측량법을 이용하여 이 선형관계가 위치 정보로 변환될 수 있음을 보였다. 실험을 통하여 선형관계에 영향을 미칠 수 있는 요소들을 분석하고 이 요소들을 최적화한 상태에서의 선형 특성을 가질 수 있음을 보였다.