• 한국지능시스템학회논문지
• /
• 제24권5호
• /
• pp.489-494
• /
• 2014

본 논문에서는 무인차량용 다중채널 무선원격 제어시스템의 설계방안을 제안한다. 기존의 무선원격 제어시스템은 단일 제어채널로 구성되어 제어채널에 고장이 발생하였을 때 응급대처가 불가능한 문제점이 있다. 따라서 휴대용 무선원격 제어기와 스테이션용 무선원격 제어로 구성되는 다중채널 무선원격시스템을 제안한다. 무인차량용 다중채널 무선원격 제어시스템을 개발하기 위하여 휴대용 무선원격 제어기와 휴대용 무선원격 제어기를 설계 및 개발하였다. 개발한 무선원격 제어시스템의 성능을 확인하기 위하여 무인차량에 적용하여 주행 실험을 실시하였다. 무선원격제어기의 고장 시 휴대용 무선원격제어기를 이용한 비상정지 실험과 휴대용 무선원격제어기의 고장 시 스테이션용 원격제어시스템을 이용한 비상정지 실험을 실시한 결과 모두 만족하는 비상정지 성능을 발휘함을 검증하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.82-86
• /
• 2001

This papers deals with feasibility study of wireless motion control. Wireless telecommunication advances with development of IT technology and extends more and more areas. So we selected Bluetooth out of the technologies(Bluetooth, SWAP(SharedWireless Access Protocol), IrDA(Infra Red Data Association), WLAN(Wireless Local Area Network)) which was developed for local data communication and set up simple experimental system for wireless data transfer and server and client program for wireless data transfer was wrote. We successfully transferred some data wirelessly with this program.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1558-1562
• /
• 2005

This paper describes the design and implementation of a wireless home network system using Home Network Control Protocol (HNCP) called the wireless HNCP home network system. For wireless interfaces of HNCP, IEEE 802.11b and IEEE 802.15.4 standard protocols are considered. With the implementation of the wireless HNCP home network system, a simple analysis about coexistence between IEEE 802.11b and IEEE 802.15.4 is achieved. Through the implemented wireless HNCP home network system and the analytical results about the coexistence between both two different wireless protocols, the feasibility of the wireless HNCP home network system is shown.

• 전력전자학회논문지
• /
• 제27권3호
• /
• pp.228-236
• /
• 2022

The charging methods of electric vehicles are divided into wired charging and wireless charging. Restrictions on the use of charging infrastructure for wireless charging vehicles currently exist because most charging infrastructure uses the wired charging method. Thus, wired and wireless integrated charging system has been studied. In this system, a wireless charging system especially requires a control method for high-efficiency operation in consideration of a change in a coupling coefficient. Therefore, this paper introduces two control methods for the high-efficiency operation of wireless charging that can be applied to wired and wireless integrated charging systems. In addition, loss analysis is performed through PSIM simulation to select a more advantageous method for high-efficiency operation among the two control methods. To verify the simulation-based loss analysis result, the two control methods are applied to the actual wireless charging system, and the efficiency is compared through the experiments Based on the experimental results, a control method suitable for high-efficiency operation of the wireless charging method is selected.

• Journal of Biosystems Engineering
• /
• 제17권1호
• /
• pp.45-54
• /
• 1992

A wireless control system was designed and constructed to control the rice transplanter of walking type with remote control. VHF(very high freqency) was sent from wireless transmitter to wireless reciever by usig 6 channels to control main clutch, steering clutch, plant lever and throttle lever within 200 meter distance between remote control and rice transplanter. The rice transplanter with wireless control system showed good performance for accuracy of travel speed, traveling mobility and turning diameter in the concrete, paddy and dry field. It is concluded that the developed wireless control system could be adapted to control not only conventional rice transplanters but also most of the agricultural machine by changing some parts of the control system.

• Smart Structures and Systems
• /
• 제3권3호
• /
• pp.321-340
• /
• 2007

Structural control technologies have attracted great interest from the earthquake engineering community over the last few decades as an effective method of reducing undesired structural responses. Traditional structural control systems employ large quantities of cables to connect structural sensors, actuators, and controllers into one integrated system. To reduce the high-costs associated with labor-intensive installations, wireless communication can serve as an alternative real-time communication link between the nodes of a control system. A prototype wireless structural sensing and control system has been physically implemented and its performance verified in large-scale shake table tests. This paper introduces the design of this prototype system and investigates the feasibility of employing decentralized and partially decentralized control strategies to mitigate the challenge of communication latencies associated with wireless sensor networks. Closed-loop feedback control algorithms are embedded within the wireless sensor prototypes allowing them to serve as controllers in the control system. To validate the embedment of control algorithms, a 3-story half-scale steel structure is employed with magnetorheological (MR) dampers installed on each floor. Both numerical simulation and experimental results show that decentralized control solutions can be very effective in attaining the optimal performance of the wireless control system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2405-2407
• /
• 2003

We propose a feedback-based congestion control algorithm for the wireless TCP network. In this paper, we present a new TCP protocol to control the congestion window size. In particular, the asymptotic analysis of the wireless TCP is presented. Through simulations, our algorithm shows an improvement of TCP’s performance in wireless networks.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.48-48
• /
• 2000

We developed a wireless communication system for multiple instrumentation system. The developed system has a function of remote instrumentation and PLC(Programmable Logic Controller) control. The system consists of CC(Control and Communication) protocol, wireless media access and physical media system. For multiple wireless communication, we propose a hub polling protocol based on master-slave control concept. To show the validity of the developed system, several experiments are illustrated.

• 한국통신학회논문지
• /
• 제38B권7호
• /
• pp.564-571
• /
• 2013

최근 무선 네트워크 기술이 많이 발전됨에 따라 많은 단말과 애플리케이션들은 무선 네트워크를 기반으로 연구되고 있다. 무선 네트워크는 유선 네트워크에 비해 편의성, 유동성, 확장성과 저렴한 가격으로 인하여 많이 사용되고 있지만, 안정성이 떨어지므로 실시간 제어시스템에서의 적용은 제한적이다. 무선 제어시스템에 있어서 가장 중요한 것은 클럭 동기화이다. 비록 기존 유선 네트워크와 무선 네트워크에서 많은 동기화 기법들이 제안 되었지만, 이러한 기법들은 무선 제어 시스템에 직접적으로 적용하기에는 부적절하다. 이에 본 논문에서는 무선 제어 시스템에서의 동기화 문제를 제기하고, 무선 네트워크의 특성들을 이용하여 클럭 동기화 기법을 제안하였다. 이와더불어 제안 알고리즘의 성능 분석을 위한 모의실험을 수행하였고, 기존 동기화 기법과 제안한 기법을 패킷 손실과 패킷 손실을 제외한 환경에서 비교 분석하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제4권6호
• /
• pp.1152-1168
• /
• 2010

Recently, due to the prevalence of various mobile devices and wireless broadband networks, there has been a significant increase in interest and demand for multimedia streaming services such as the mobile IPTV. In such a wireless broadband network, transmitting a continuous stream of multimedia data is difficult to achieve due to mobile stations (MSs) movement. Providing Quality of Service (QoS) for multimedia video streaming applications requires the server and/or client to be network-aware and adaptive. Therefore, in order to deploy a mobile IPTV service in wireless broadband networks, offering users efficient wireless resource utilization and seamlessly offering user perceived QoS are important issues. In this paper, we propose a new adaptive streaming scheme, called MARC (Mobile-aware Adaptive Rate Control), which adjusts the quality of bit-stream and transmission rate of video streaming based on the wireless channel status and network status. The proposed scheme can control the rate of multimedia streaming to be suitable for the wireless channel status by using awareness information of the wireless channel quality and the mobile station location. The proposed scheme can provide a seamless multimedia playback service in wireless broadband networks in addition to improving the QoS of multimedia streaming services. The proposed MARC scheme alleviates the discontinuity of multimedia playback and allocates a suitable client buffer to the wireless broadband network. The simulation results demonstrate the effectiveness of our proposed scheme.