• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.58-62
• /
• 2007

Digital communication is important for reliability and mobilization of the multi-channel communication systems. Transmitting and receiving data for the mobilization should be possible in anywhere and in anytime. And this system must be designed light weight small size and low power. One are essential technology for implementing the mobile wireless communication system on the age of ubiquotos. Requirements in constructing such communication field are followings. At first data transmitting and receiving should be carried out by a simple command. Second, the device should be designed as hand-hold type and low power consumption. Third, data communication should be reliable. As one of examples, car to car system which is popular in the market is introduced here, All traffic information in highway is transmitted from one car to another by using this system which can prevent possible traffic accident. This paper shows the design of a digital data communication system with CC1020 chip. This CC1020 makes easy frequency selection and easy switch from the transmit mode to the receive mode by simple setting of a memory register in the chip. The transmit power of this system is designed 10dBm and its communication range is about 100m. The power supplied this system is 3V considered as low power. The sleep mode can be easily entered during transmit mode or receive mode. We shows the program algorithm of CC1020 and interface circuit between MCU and CC1020. We shows the Photo of the CC1020 Module and Atmega128 Module.. We analysed the receiver rate with this system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9A
• /
• pp.1048-1057
• /
• 2004

WCDMA system is 3rd generation wireless mobile system specified by 3GPP. In WCDMA downlink, two power control schemes are operated. One is inner loop power control operated m every slot Another is outer loop power control based on one frame time. Base staion (BS) can estimate proper transmission power by these two power control schemes. However, because each MS's transmission power makes a severe effect on BS's performance, BS cannot give excessive transmission power to the speclfic user 3GPP defined Power Control Dynamic Range (PCDR) to guarantee proper BS's performance. In this paper, we propose Adaptive PCDR algorithm. By APCDR algorithm, Radio Network Controller (RNC) can estimate each MS's current state using received signal to interference ratio (SIR) APCDR algorithm changes MS's maximum code channel power based on frame. By proposed scheme, each MS can reduce wireless channel effect and endure outages in cell edge. Therefore, each MS can obtain better QoS. Simulation result indicate that APCDR algorithm show more attractive output than fixed PCDR algorithm.

• Journal of Broadcast Engineering
• /
• v.16 no.2
• /
• pp.350-359
• /
• 2011

Fast developments of broadcasting technologies since 1990s enabled not only High Definition Television service providing high quality audiovisual contents at home but also mobile broadcasting service providing audiovisual contents to high speed moving vehicle. Terrestrial Digital Multimedia Broadcasting (T-DMB) is one of the technologies developed for mobile broadcasting service, which has been successfully commercialized. One of the major technical breakthroughs achieved by T-DMB in addition to robust vehicular reception is an adoption of framework based on MPEG-4 System. It naturally enables integrated interactive data services by using Binary Format for Scene (BIFS) technology for scene description and representation of graphics object and Object Descriptor Framework representing multimedia service components as objects. T-DMB interactive data service has two fundamental limitations. Firstly, graphic data for interactive service should be always overlaid on top of a video not to be rendered out of it. Secondly, data for interactive service is only received by broadcasting channel. These limitations were considered as general in broadcasting systems. However, they are being considered as hard limitations for personalized data services using location information and user characteristics which are becoming widely used for data services of smart devices in these days. In this paper, the architecture of T-DMB hybrid data service is proposed which is utilizing broadcasting network, wireless internet and local storage for delivering BIFS data to overcome these limitations. This paper also presents hybrid BIFS technology to implement T-DMB hybrid data service while maintaining backward compatibility with legacy T-DMB players.

• Journal of KIISE:Information Networking
• /
• v.35 no.5
• /
• pp.437-452
• /
• 2008

IEEE 802.16j MR networks introduce RSs (Relay Stations) within the IEEE 802.16 system in order to enhance the data throughput and extend the coverage. However, the current standardization defines that the BS (Base Station) controls MS's (Mobile Station's) handover, not only it induces the large signaling overhead but also handover latency could increase. In this paper, we propose a handover protocol in the MR networks where the high capability RSs that can process the MS's control functions are deployed. First, we classify the handover scenarios for the MR networks with the high capability RSs. Then, we define the MAC handover procedure, corresponding MAC management messages and the transmission routes for the proposed messages so that an 802.16e MS can perform seamless handover without noticing it is attached to an MR network. The simulation results show that the proposed handover protocol not only reduces the MAC management message overhead transferred through the wireless links compared to IEEE 802.16j/D1, which is the current standard for MR networks, but also performs the rapider and more secure MS handover than IEEE 802.16e and IEEE 802.16j/D1.

• Journal of Korea Multimedia Society
• /
• v.13 no.5
• /
• pp.740-753
• /
• 2010

Performance of TCP can be severely degraded in WLP-based Mobile IP wireless networks where packet loss not related to network congestion occurs frequently during WLP-based inter-subnetwork handoff by user mobility. To resolve such a problem in the networks using WLP-based Mobile IP, the packet buffering method recovering seamlessly the packets dropped due to user mobility has been proposed. The packet buffering method at a bridge station recovers those packets dropped during handoff by forwarding buffered packets at the old bridge station to the WLP device. But, when the WLP device moves to a congested bridge station in a new WLP foreign subnetwork, those buffered packets forwarded by the old bridge station are dropped and TCP transmission performance of a WLP device in the congested bridge station degrades due to increased congestion by those forwarded burst packets. In this paper, a PBM(Packet Bridge Marker) is proposed for preventing buffered out-of-profile(OUT) packets from reducing the throughput of in-profile(IN) packets of an Assured Service WLP device. From this operation, the packet losses of buffered OUT packets are avoided and the throughput of IN and Total packets of an AS WLP device are increased.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.31-38
• /
• 2008

Ad-Hoc network is a network architecture which has no backbone network and is deployed temporarily and rapidly in emergency or war without fixed mobile infrastructures. All communications between network entities are carried in ad-hoc networks over the wireless medium. Due to the radio communications being extremely vulnerable to propagation impairments, connectivity between network nodes is not guaranteed. Therefore, many new algorithms have been studied recently. This study proposes the secondary header approach to the cluster based routing protocol (CBRP). The primary header becomes abnormal status so that the primary header can not participate in the communications between network entities, the secondary header immediately replaces the primary header without selecting process of the new primary header. This improves the routing interruption problem that occurs when a header is moving out from a cluster or in the abnormal status. The performances of proposed algorithm ACBRP(Advanced Cluster Based Routing Protocol) are compared with CBRP. The cost of the primary header reelection of ACBRP is simulated. And results are presented in order to show the effectiveness of the algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.3
• /
• pp.277-288
• /
• 2013

3GPP LTE-Advanced (Third Generation Partnership Project Long Term Evolution-Advanced) as a next generation mobile communication standard introduced small base stations such as femto cells or pico cells, and D2D (Device-to-Device) communications between mobiles in the proximity in order to satisfy the needs of rapidly growing wireless data traffic. A diverse range of topics has been studied to solve various interference situations which may occur within a single cell. In particular, an introduction of a small base station along with D2D communication raises important issues of how to increase the channel capacity and frequency efficiency in HetNets (Heterogeneous Networks). To this end, we propose in this paper methods to manage the interference between the macro cell and other small cells in the HetNet to improve the frequency efficiency. The proposed CCN (Cluster Coordinator Node)-assisted ICI (Inter-Cell Interference) avoidance methods exploit the CCN to control the interference in HetNet comprising of an MeNB (Macro enhanced Node-B) and a large number of small cells. A CCN which is located at the center of a number of small cells serves to avoid the interference between macro cell and small cells. We propose methods of resource allocation to avoid ICI for user equipments within the CCN coverage, and evaluate their performance through system-level computer simulations.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.10
• /
• pp.337-350
• /
• 2014

Internet-of-Things(IoT) is the computing paradigm converged with different technologies, where diverse devices are connected via the wireless network, acquire environmental information from their equipped sensors, and are actuated. IoT applications provide smart services to users by interacting with multiple devices connected to the network. IoT devices provide the simple set of the information and also offer smart services by collaborating with other devices. That is, IoT applications always interact with IoT devices which are becoming very popular at a fast pace. However, due to this fact, developing IoT application results in unconventional technical challenges which have not been observed in typical software applications. Moreover, since IoT computing has its own characteristics which are distinguished from other former paradigms such as embedded computing and mobile computing, IoT applications also reveal their own technical challenges. Therefore, we analyze technical challenges occurring in developing IoT applications and present effective solutions to overcome the challenges. To verify identified issues and presented solutions, we present the result of performing a case study of developing an IoT application. Through the case study, we verify how the unconventional technical issues are raised in a real domain and analyze effectiveness of applying the solutions to the application.

• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.1-14
• /
• 1998

In this paper, Antenna, LNA, Mixer, VCO, and Modulation/Demodulation in Baseband processor which are the RF main components in Wireless LAN system for ultra high-speed communications network are studied. Antenna bandwidth and selective fading due to multipath can be major obstacles in high speed digital communications. To solve this problem, wide band MSA which has loop-structure magnetic antenna characteristics is designed. Distributed mixer using dual-gate GaAs MESFET can achieve over 10dB LO/RF isolation without hybrid, and minimize circuit size. As linear mixing signal is produced, distortions can be decreased at baseband signals. Conversion gain is achieved by mixing and amplification simultaneously. Mixer is designed to have wide band characteristics using distributed amplifier. In VCO design, Oscillator design method by large signal analysis is used to produce stable signal. Modulation/Demodulation system in baseband processor, DS/SS technique which is robust against noise and interference is used to eliminate the effect of multipath propagation. DQPSK modulation technique with M-sequences for wideband PN spreading signals is adopted because of BER characteristic and high speed digital signal transmission.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.5
• /
• pp.919-929
• /
• 2013

Recently, a variety of IT technologies are applied to the vehicle. However, some vehicle-IT technologies without security considerations may cause security problems. Specially, some researches about a smart key system applied to automobiles for authentication show that the system is insecure from replay attacks and modification attacks using a wireless signal of the smart key. Thus, in this paper, we propose an authentication method for the driver by using driving patterns. Nowadays, we can obtain driving patterns using the In-vehicle network data. In our authentication model, we make driving ppatterns of car owner using standard normal distribution and apply these patterns to driver authentication. To validate our model, we perform an k-fold cross validation test using In-vehicle network data and obtain the result(true positive rate 0.7/false positive rate is 0.35). Considering to our result, it turns out that our model is more secure than existing 'what you have' authentication models such as the smart key if the authentication result is sent to the car owner through mobile networks.