• Journal of Korea Multimedia Society
• /
• v.11 no.5
• /
• pp.685-691
• /
• 2008

Recently with the rapid evolution of the mobile computing and communication technologies, mobile VOD service becomes increasingly important for wireless mobile users. The VOD service is being widely used in various areas of application, such as education, entertainment and business, because it provides users convenience in easily having access to video information at any time in any places. However, in reality, the mobile system has many difficulties in providing the smooth VOD service owing to frequent transfers and cutoffs of clients. The importance of a technique to transmit broadcasting is being stressed as a method for providing stabler mobile VOD service to a large number of clients. This paper is aimed at showing how to reduce demands for server bandwidth and delay of earlier service through performance analysis by suggesting an effective VOD broadcasting transmission technique through channel division in the mobile atmosphere. Many researches have been made about regular broadcasting techniques in particular. This study divides the methods used for assigning channels which have been decided by the size of segments into a group of regular channels and assistant channels using wireless gap-fillers to provide effective VOD services to a large number of clients at the mobile environment using small bandwidth resources. The regular channels transfer regular streams, while assistant channels repeatedly transfer the first segment to reduce early service delay time to receive regular streams. In this way, the study suggests a technique to reduce server bandwidth demand and early service delay time. Through the proposed technique, the server bandwidth demand could be reduced by more than 30 percent and the study continuously shows reduced early service delay time through conducting performance analysis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.1898-1905
• /
• 2012

This paper presents an On-board Smart Device (OSD) for moving vehicle, based on a smooth integration of Android-based devices and a Micro-control Unit (MCU). The MCU is used for the acquisition and transmission of various vehicle-borne data. The OSD has threefold functions: Record, Report and Alarm. Based on these RRA functions, the OSD is basically a safety and convenience oriented smart device, where it facilitates alert services such as accident report and rescue as well as alarm for the status of vehicle. In addition, voice activated interface is developed for the convenience of users. Vehicle data can also be uploaded to a remote server for further access and data manipulation. Therefore, unlike conventional blackboxes, the developed OSD lends itself to a user-friendly smart device for vehicle safety: It basically stores monitoring images in driving plus vehicle data collection. Also, it reports on accident and enables subsequent rescue operation. The developed OSD can thus be considered an essential safety smart device equipped with comprehensive wireless data service, image transfer and voice activated interface.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.497-500
• /
• 2010

Wireless sensor network is the system for data collection and data process between many nodes. For this work, Synchronization of operation execution and ordering many events are needed. Reference the external time information is the most accurate way to have same time information for all nodes but it's hard to apply these to sensor network. So there are many study of time synchronization there are many error occurred when the time synchronization is executed in the sensor network and minimizing these errors is important. In this paper, we propose how to minimize errors using several time stamp information exchanging when the network is initialized. When the big difference is occurred between receive time and send time in the node communication(cause of traffic overhead and etc), it shows big error of time correction and transfer delay time. but it's hard to detect these errors when it exchanges time stamp information just one time. so we try to reduce these errors using the median value of transfer delay and time correction value with many times of time stamp information exchange.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.137-142
• /
• 2016

A two-step open system(TOS) was proposed to relay between a healing platform and a repository of personal health documents. TOS was designed by taking into consideration the pubsub service based on large scale connections to monitor a provider's access/request process for health documents in real time. TOS, however, uses WebSocket as a communication protocol in case of pubsub. Given the operational environment of low quality wireless networks for mobile devices that are user terminals in a healing platform, there is a need to add a messaging protocol to support QoS as well as a transmission protocol. As a light messaging protocol optimized for mobile devices, MQTT defines reliable messaging QoS to consider a wireless network situation of low speed/low quality. This study designed an MQTT protocol-based message broker to support QoS in case of large scale connections and pubsub by taking into consideration mobile devices that are user terminals in a healing platform. After designing a model between TOS and MQTT message broker, the study implemented a prototype based on the proposed design and compared it with its counterparts from previous studies based on the performance indicators in a load-test with the MQTT client tool.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1302-1308
• /
• 2005

Propose Cellular-IP/PRC network with united paging and Cellular IP special duality that use roof information administration cache to secure lake acceptance method in wireless Internet environment and QoS in lesser extent cell environment. When speech quality is secured considering increment of interference to receive in case of suppose that proposed acceptance method grooves base radio station capacity of transfer node is plenty, and moat of contiguity cell transfer node was accepted at groove base radio station with a blow, groove base radio station new trench lake acceptance method based on transmission of a message electric power estimate of transfer node be. Do it so that may apply composing PC(Paging Cache) and RC(Routing Cache) that was used to manage paging and router in radio Internet network in integral management and all nodes as one PRC(Paging Router Cache), and add hand off state machine in transfer node so that can manage hand off of transfer node and Roaming state efficiently, and studies so that achieve connection function at node. Analyze benevolent person who influence on telephone traffic in system environment and forecasts each link currency rank and imbalance degree, forecast most close and important lake interception probability and lake falling off probability, GoS(Grade of Service), efficiency of cell capacity in QoS because applies algorithm proposing based on algorithm use gun send-receive electric power that judge by looking downward link whether currency book was limited and accepts or intercept lake and handles and displays QoS performance improvement.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.3-11
• /
• 2013

In smart healthcare service, the accurate and prompt emergency detection and notification are very critical to patients' lives. Since these detection and notification of emergency situation are usually performed by the medical staffs, it is difficult to simultaneously support many patients in real-time. This article presents a methodology for emergency bio-data transmission for smart healthcare using personalized emergency policy. It consists of three steps: In step 1, the bio-data is collected by wireless body area network. In step 2, the decision on emergency is made using personalized emergency policy. In step 3, the emergency message including the health condition information is converted between IEEE 11073 PHD message and HL7 CDA. By doing this, the emergency status of the individual bio-data collected from wireless body area network is detected automatically using personalized emergency policy. When the emergency is detected, the quick emergency rescue service can be provided to the patient by delivering to the emergency notification and the emergency bio-data. We have verified the service and functions of the proposed system architecture by realizing it.

• Journal of Digital Convergence
• /
• v.13 no.5
• /
• pp.213-218
• /
• 2015

In parallel with evolving information communication technology, M2M(Machine-to-Machine) industry has implemented multi-functional and high-performance systems, and made great strides with IoT(Internet of Things) and IoE(Internet of Everything). Authentication, confidentiality, anonymity, non-repudiation, data reliability, connectionless and traceability are prerequisites for communication security. Yet, the wireless transmission section in M2M communication is exposed to intruders' attacks. Any security issues attributable to M2M wireless communication protocols may lead to serious concerns including system faults, information leakage and privacy challenges. Therefore, mutual authentication and security are key components of protocol design. Recently, secure communication protocols have been regarded as highly important and explored as such. The present paper draws on hash function, random numbers, secret keys and session keys to design a secure communication protocol. Also, this paper tests the proposed protocol with a formal verification tool, Casper/FDR, to demonstrate its security against a range of intruders' attacks. In brief, the proposed protocol meets the security requirements, addressing the challenges without any problems.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.18-25
• /
• 2014

To increase wireless capacity, the concurrent use of multiple wireless interfaces on different frequency bands, called aggregation, can be considered. In this paper, we focus on aggregation of multiple Wi-Fi interfaces with packet-level traffic spreading between the interfaces. Two aggregation schemes, link bonding and multipath TCP (MPTCP), are tested and compared in a dualband Wi-Fi radio system with their Linux implementation. Various test conditions such as traffic types, network delay, locations, interface failures and configuration parameters are considered. Experimental results show that aggregation increases throughput performance significantly over the use of a single interface. Link bonding achieves lower throughput than MPTCP due to duplicate TCP acknowledgements (ACKs) resulting from packet reordering and filtering such duplicate ACKs out is considered as a possible solution. However, link bonding is fast responsive to links' status changes such as a link failure. It is shown that different combinations of interface weights for packet spread in link bonding result in different throughput performance, envisioning a spatio-temporal adaptation of the weights. We also develop a mathematical model of power consumption and compare the power efficiency of the schemes applying different power consumption profiles.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.6
• /
• pp.449-456
• /
• 2018

Herein, several multibeam forming methods that can be applied to microwave wireless power transmission are presented. Because the conventional multibeam forming methods do not consider an active element pattern(AEP), an intended beam shape will contain a steering angle error when applied to an actual system. To solve this problem, a method of considering the average of the AEP and a method of considering all the AEPs by the modified Fourier series method have been proposed. We confirmed that the proposed method reduces the error with the intended beam shape in the multibeam formation. In addition, for the side lobe level(SLL) and null control, a method of multibeam forming by applying the superposition principle to the Dolph-Tschebyscheff method is proposed. We also confirmed that SLL control can be simultaneously achieved with the multibeam formation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.1
• /
• pp.95-101
• /
• 2016

Vehicular communications is system which can be applied for transmission of various safety messages or Intelligent Transportation Systems(ITS) applications by combining vehicle/road technology with Information and Communication Technology(ICT). In recent years, a variety of ITS services are available such as driving information, road conditions, V2X messages as well as navigation and traffic jams notification. In general, vehicular communications can be used for vehicle-to-vehicle and vehicle-to-infrastructure communication by adopting IEEE802.11p/1609 standard which is commonly known as wireless access in vehicular environments. In this paper, WAVE communication standard based on the IEEE802.11p is explained and signal characteristics in WAVE communication is introduced. Also, The H/W and S/W characteristics in Road Side Station and On Board Equipment for the Vehicle to Everything communication are analyzed. Received Signal Strength which is power of receiving signal of communication equipment is measured in test road to estimate the real WAVE communication's performance. It is shown that the implemented WAVE communication technology is satisfactory to provide ITS services.