• The KIPS Transactions:PartC
• /
• v.18C no.3
• /
• pp.179-186
• /
• 2011

Wireless Mesh Network technology refers to the technology which establishes wireless network whose transmission speed is similar to that of the wire system, and provides more enhanced flexibility in the building of network, compared to the existing wired network. In addition, it has the feature of less mobility and less restriction from the energy effect. However, there follow many considerations such as system overhead in the case of setting or the selection of multi-path. Accordingly, the focus is on the design and optimization of network which can reflect this network feature and the technology to establish path. This paper suggests the methods on the programming of path in Wireless Mesh Network routing by applying the evaluation value of node service, making use of the loss rate of data, the hop count of bandwidth and link and the traffic status of node, considering the performance of link and load in the fitness evaluation function, in order to respond to the programming of multi-path effectively.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.411-414
• /
• 2004

This paper introduces a modulation method for digital wireless communication based on general DS-QPSK. The design and fabrication is for home networking application to a typical RF transmitter with DS-QPSK modulator. This modulator implemented using VHDL hardware programming language, the fabrication of IC chip $5{\times}5 mm^2$ was carried by 27th IDEC MPW(Multi Project Wafer) process in 0.35${\mu}m$ rule at Samsung Inc. This paper presented the important of this technology for the future application in wireless sensor. This module can be efficient usage for home network to transmit the RF wireless sensor system.

• Smart Structures and Systems
• /
• v.3 no.1
• /
• pp.69-88
• /
• 2007

In this study, Field-Programmable Gate Arrays (FPGAs) are investigated as a practical solution to the challenge of designing an optimal platform for implementing algorithms in a wireless sensing unit for structuralhealth monitoring. Inherent advantages, such as tremendous processing power, coupled with reconfigurable and flexible architecture render FPGAs a prime candidate for the processing core in an optimal wireless sensor unit, especially when handling Digital Signal Processing (DSP) and system identification algorithms. This paper presents an effort to create a proof-of-concept unit, wherein an off-the-shelf FPGA development board, available at a price comparable to a microprocessor development board, was adopted. Data processing functions, including windowing, Fast Fourier Transform (FFT), and peak detection, were implemented in the FPGA using a Matlab Simulink-based high-level abstraction tool rather than hardware descriptive language. Simulations and laboratory tests were carried out to validate the design.

• Journal of Communications and Networks
• /
• v.11 no.4
• /
• pp.350-358
• /
• 2009

In a wireless sensor network (WSN) setting, this paper presents a distributed decision-making framework and illustrates its application in an online structural health monitoring (SHM) system. The objective is to recover a damage severity vector, which identifies, localizes, and quantifies damages in a structure, via distributive and collaborative decision-making among wireless sensors. Observing the fact that damages are generally scarce in a structure, this paper develops a nonlinear 0-norm minimization formulation to recover the sparse damage severity vector, then relaxes it to a linear and distributively tractable one. An optimal algorithm based on the alternating direction method of multipliers (ADMM) and a heuristic distributed linear programming (DLP) algorithm are proposed to estimate the damage severity vector distributively. By limiting sensors to exchange information among neighboring sensors, the distributed decision-making algorithms reduce communication costs, thus alleviate the channel interference and prolong the network lifetime. Simulation results in monitoring a steel frame structure prove the effectiveness of the proposed algorithms.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.80-87
• /
• 2022

Lack of sufficient battery capacity is one of the most important challenges impeding the development of wireless sensor networks (WSNs). Recent innovations in the areas of wireless energy transfer and rechargeable batteries have made it possible to advance WSNs. Therefore, in this article, we propose an energy-efficient charging of sensors in a WSN scenario. First, we have formulated the problem as an integer linear programming (ILP) problem. Then a utility function-based greedy algorithm named UGreedy/UF1 is proposed for solving the problem. Finally, the performance of UGreedy/UF1 is analyzed along with other baseline algorithms: UGreedy/UF2, 2-opt TSP, and Greedy TSP. The simulation results show that UGreedy/UF1 performs better than others both in terms of the deadline missing ratio of sensors and the total energy consumption of UAVs.

• Journal of Broadcast Engineering
• /
• v.1 no.1
• /
• pp.14-21
• /
• 1996

Wireless CATV is a type of CATV that offers its subscribers a mix of microwave channel by transmitting the programming over MMDS frequency. The benefit of wireless CATV can be made available in areas of scattered population and other areas where it is too expensive to build a traditional cable station. Also, due to the lower cast of building a wireless cable station, saving can be passed on to the subscribes. Therefore, in this paper 28[GHz] band bidirectional analog wireless system was proposed. When fully implemented, wireless CATV may have as many as 33 channels of broadcast. Further, if digital wireless CATV is used 150 to 300 channels may become available.

• Journal of Communications and Networks
• /
• v.17 no.3
• /
• pp.241-246
• /
• 2015

In this paper, we consider a relaying system which employs a single relay in a wireless network with distributed sources and destinations. Here, all source, destination, and relay nodes are equipped with multiple antennas. For amplify-and-forward relay systems, we confirm the achievable sum rate through a joint multiple source precoders and a single relay filter design. To this end, we propose a new linear processing scheme in terms of maximizing the sum rate performance by applying a blockwise relaying method combined with geometric programming techniques. By allowing the global channel knowledge at the source nodes, we show that this joint design problem is formulated as a standard geometric program, which can guarantees a global optimal value under the modified sum rate criterion. Simulation results show that the proposed blockwise relaying scheme with the joint power allocation method provides substantial sum rate gain compared to the conventional schemes.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.4
• /
• pp.33-41
• /
• 2013

In this paper, we implemented the pattern matching with the Arduino and App Inventor platform under the bluetooth mobile environment between Android phone and Arduino Platform. The combination between Arduino and App Inventor makes the feasibility of Android programming easy by wireless communications and provides the opportunity to broaden the functionality for mobile device. We used the softwares which were Arduino IDE, VC++, OpenCV, Processing and App Inventor. And also compared the performance of mobile Arduino platform with LabView GUI programming, we reduced the usage of libraries that compiled and executed the pattern matching programming. We experimented the mobile embedded platform performance under bluetooth communication and verified the functionality of the mobile Arduino platform design for identifying the pattern matching.

• KSCI Review
• /
• v.14 no.1
• /
• pp.213-219
• /
• 2006

We need the customized e-Learning service according to not only developing the wireless mobile and hardware technology, also developing the multimedia process skills. Especially, the beginner who start to learn the first programming course must be provided the personalized learning. The beginner require the repeated practices to obtain the programming skills, also they reveal the different learning effects following the learner capability In this paper. we develop a new e-Learning contents which give the individual service for learner and show the simulation which is program execution to maximize the learning effects.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.5
• /
• pp.21-26
• /
• 2012

Intra-session network coding has been proposed to improve throughput by simplifying scheduling of multi-hop wireless network and efficiency of packet transmission. Multi-rate transmission has been used in multihop wireless networks. An opportunistic routing with multirate shows throughput improvement compared with single rate. In this paper, we propose a method of throughput improvement in multi-hop wireless network by using multi-rate and intra-session network coding. We suggest a method to select an local optimal transmission rate at each node. The maximum throughput is evaluated by using linear programming (LP). To solve the LP, we use MATLAB and lp_solve IDE program. The performance evaluation results show that end-to-end throughput is improved by using multirate and intra-session network coding can achieve better throughput than opportunistic routing.